Fiat Timing Tool Set
Alfa Romeo / Fiat / Lancia 0.9 Twin Air Engines
For adjusting the engine timing when replacing
the timing chain or cylinder head repairs etc.
Crankshaft Locking Pin
Belt Pulley Locking Pin
Camshaft Lockin

Fiat Timing Tool Set
Engine Timing Tool Kit
Alfa Romeo / Lancia 1.75 TBI
Suitable for the 4 cylinder twin camshaft
turbo charged belt driven engines on
Alfa Romeo and Lancia Delta vehicles from 2009 to 2015

Timing Belt Tensioning Tool
Universal Tensioner for a simple way to tension the timing belt
on GM engines fitted to Alfa Romeo / Fiat / Lancia / PSA / Saab and Suzuki.
Applicable to 1.6L / 1.9L / 2.0L / 2.4L diesel vehicles.

Ford Camshaft Sprocket Puller
Size 90 x 65mm
Applicable to - F8M | F8Q | S8U | S9U
Also suitable for removing the Impeller.
Also found in Timing Tool Set CT3429

Clamping Washer Heat Shield Tool
For the removal of, or fitting clamping washers
which are used on under body heat shields etc.
1/4in.Dr for use with cordless tools.
Applicable to Ford and VAG Group vehicles :
Audi / Seat / Skoda

Ford Rear Camshaft Pulley Installation and Removal Kit
for Ford and Mazda V6 Engines
Specifically for removing and reinstalling the rear camshaft pulley
which connects to the water pump during servicing.
Applicable to : Ford / Mazda 2.5L | 3.0L V6 engine.

Ford Timing Tool Set
For aligning the engine timing on
1.0L Ecoboost 3 cylinder SCTi Petrol Engines.
Applicable to : B-Max | C-Max | Grand C-max.
EcoSport | Fiesta | Focus | Transit | Tourneo.

Ford Timing Tool Set for 1.5L Duratec Engines in
Ecosport / Escape 7.57 / Fiesta and Focus.
Aligns and locks the camshaft in the right position.
OEM : 303-1639 | 303-1643 | 303-1647 | 303-1648

Ford Timing Tool Set
for 1.5L 3 Cylinder EcoBoost Petrol Engines
With Flywheel Holding Tool and Camshaft Locking Tool.
Allows timing chain replacements and
engine rebuilds on chain driven camshafts.
Applicable to :
Ford Focus Eco-Boost 2018 and newer.
Ford Focus ST Eco-Boost 2018 and newer.
Fiesta Duratec 2018 and newer.
Ford Kuga 1.5L Eco-Boost 2019 and newer.

Ford Camshaft Setting Tool
for Ford 1.6L EcoBoost Petrol Engines.
For locking the camshaft when servicing the timing chain.
Applicable to the Sigma 1.6L EcoBoost 2010 onwards.
OEM Code : 303-1552

Ford Timing Tool Set
for Ford 1.6 TI-VCT Duratec Engines
For timing belt replacement on 1.6 Ti-VCT Duratec EcoBoost Engines.
With Camshaft / Crankshaft and Flywheel Locking Pins
used to lock the camshafts in their timed position
when removing belts and pulleys during servicing.
Suitable for many other petrol and diesel Ford engines.

Ford / Volvo Timing Tool Set
For 1.6L / 2.0L GTDI T4 / T5 V4 Engines
To adjust and fix angle of camshaft and crankshaft.
Applicable Models : S60 | S80 | V40 | V60 | V70 | XC60
Also for Ford cars with 1.6 SCTi / Ti-VCT Eco boost engines.

Ford Timing Tool Set
For replacing the cam belt on Ford Focus Vehicles
1.6 TI-VCT | 2.0 TDCI / 2003 - 2007
Camshaft Sprocket Holding Tool
Camshaft Sprocket Locking Tool
Tensioner Pulley Locking Pin
Crankshaft Timing Pin
Flywheel Timing Pin

Ford / Mazda Timing Tool Set
Combination kit of Setting and Locking Tools
suitable for a wide range of Ford petrol and diesel engines.
Includes camshaft and flywheel locking tools various timing pins
plus a camshaft sprocket removal tool.
Also suitable for Land Rover / Mazda / PSA / Suzuki and Volvo vehicles.

JLR Timing Tool Set
For Jaguar Land Rover 2.0 Chain Drive Petrol Engines
With crankshaft pulley and crankshaft sensor positioning tools

Ford Timing Tool Set
For locking and checking the camshaft on -
Ford / Jaguar 2.0L EcoBoost / Duratec Petrol Engines.
Land / Range Rover 2.0L GTDI and Si4 Diesel Engines.

Ford Injection Pump Service Kit
For Removing and Installing Injection Pumps on
2.0L Ecoblue TDCi Diesel engines.
Applicable to : Transit / Transit Custom and Tourneo Custom.
Engines : AWD | FWD | RWD / from 2016
Focus | Galaxy | S-Max / from 2018
Ranger from 2019.

Ford Timing Tool Set
For checking and setting the latest Ford 2.0D EcoBlue TDCi engine
which features an innovative - belt in oil design where
the synchronous drive belt is sited inside the oiled area of the engine.
Flywheel Holding Tool : OEM 303-1643
Crankshaft Alignment Tool : OEM 303-1637
Timing Belt Installing Cups : OEM 303-1650
5mm hex key wrench

Ford Timing Tool Set
For the 2.0L EcoBoost SCTi and Ti-VCT engines
in Focus / Galaxy / Mondeo / S-Max models.

Ford Timing Tool Set / 2.2L | 3.2L TDCi
For locking the crankshaft and flywheel to allow the TDC sensor position
to be set after removal when servicing the cam chain drive system.
Ford Ranger 2.2L / 2011 - 2015
Ford Ranger 3.2L / 2011 - 2016
Ford Transit 2.2L / 2006 - 2016
Ford Everest 3.2L / 2015 onwards
Mazda BT-50 / 2011 onwards
ECOnetic and HDT engines including the popular 3.2L diesel engine.

Ford Timing Tool Set
for Ford / Mazda / VAG / Volvo
Provides checking and adjusting engine timing.
Camshaft / Crankshaft Locking and Adjusting Tools
Chain / Tooth Belt / Drive Belt Tension Tools
Crankshaft Sprocket Holder and Alignment Tools
Locking Bracket and Support Guides
TDC Indicator and Dial Test Indicator
Injection Pump Tools

Ford / Mazda / Volvo
Petrol Engine Setting / Locking Kit
Covers the complete range of Ford Duratec engines
1.25 through to 2.3 16V in both belt and chain drive variants.
Also suitable for Duratec engines in Mazda and Volvo vehicles.
See detail page for full list of vehicles and engine codes.

Ford Diesel Engine Timing Kit
for Chain Drive 1.8TDi / TDCi engines
For timing belt replacement on diesel engines
fitted to Ford 1.8TDDi / TDCi chain drive vehicles
and high pressure fuel pump Wet Belt applications.
With high pressure pump sprocket removal
and timing chain cover alignment tools.

Ford / Mazda Timing Tool Set
Comprehensive Engine Timing Tool Kit for most Ford models
including petrol and diesel also the latest Zetec engines.
Includes special pins required to lock the camshaft sprocket /
flywheel and align the crankshaft and fuel pump when checking
the valve timing on 2.0 and 2.4L chain driven engines
and or replacing the timing belt on 1.4L engines.

Ford Timing Tool Set
for Ford / Mazda / PSA / Volvo
For setting engine timing when replacing the camshaft or cylinder head gasket.
Camshaft locking pin. Flywheel locking bolt
Crankshaft / high pressure pump locking pin.
PSA - Citroen / Peugeot 1.4 / 1.6 Hdi
Mazda 1.4CiTD
Ford 1.4TDCi / 1.6TDCi
Volvo 1.6D

Ford Fuel Pump Sprocket Puller
for Ford Transit 2.2L TDCi
From 2011 fuel pump sprockets no longer have threaded holes fitted in them
this tool allows the pump removal without removing the timing chain.
Applicable to : Ford Transit from 2011

Ford Fuel Pump Sprocket Tool Set
for Ford Transit 2.0 / 2.2 / 2.4 / 3.2 TDDi TDCi
For removing and installing the high press pump sprocket cover
and keeping the engine shaft in place when changing the timing belt or
performing other engine repairs | and to replace the injection pump on -
Ford: Mondeo / Transit / Jaguar X-Type / Land Rover Defender
Fiat Ducato / Citroen Jumper III Relay / Peugeot Boxer 3 / LDV Convoy.

Ford Timing Tool Set
for Duratorq 16V Engines
in Mondeo and Transit 2.0 / 2.4 TDI TDCI from 2001 to 2004
For Locking the camshaft / injection pump shaft
or crankshaft in position when changing a timing belt
or during other engine repairs to remove and replace the injection pump.
Mounting / Demounting tool for the injection pump.

Timing Tool Set
for Ford / Mazda / Volvo / VAG
For checking and adjusting the engine timing.
Camshaft Adjusting Tools.
Injection Pump Adjusting Tools.
Flywheel / Crankshaft Locking Tools.
Camshaft Sprocket Puller.
Feeler Gauge.

Ford Timing Tool Set
Ford / Land Rover / Mazda
For Locking the camshaft and crankshaft when servicing the timing chain
on 4.0L SOHC V6 engines in Ford / Land Rover / Mazda vehicles.
Applicable to :
Ford Courier / 05-06
Explorer / 96-08
Mazda B4000
Land Rover Discovery 3 / 05-09

Honda Timing Tool Set
for Single and Twin Cam belt drive petrol engines.
Honda 1.6 - 3.0 SOHC / DOHC petrol engines on
models : Civic | Accord | Prelude | Shuttle Odyssey
Also Rover B / D / F and H series engines.
With Tensioner Clamp
Balance Shaft Locking Tool
2 Camshaft Locking Pins
and Bolt to lock cam belt tensioners.

JLR Timing Tool / Camshaft Alignment Kit
For Jaguar / Land Rover 5.0L V8 Petrol Engines
Timing tool camshaft alignment to lock the ring gear.
To tension the VVT during the timing procedure.
Applicable to : XK | XF | XJ

JLR Timing Tool Set
Diesel Engine Timing Locking and Setting Kit
for Jaguar / Land Rover 2.7 Diesel Belt Drive Engines.
Kit contains camshaft alignment / timing pins and flywheel locking tools.
Applicable to Jaguar S-Type TDVi 04 - 09 . Land Rover Discovery / Range Rover Sport TDV6 04 - 09

JLR Diesel Fuel Pump Locking Tool
Used to position and lock the high pressure fuel pump into its timed position
when changing the fuel pump drive belt on Jaguar Land Rover 3.0L TDV6.
Applicable to :
Jaguar XF / 09-18 | XJ / 09-14 | F-Pace / 16-18.
Land Rover Discovery 3 / 04-09 | Discovery 4 / 09-20.
Range Rover L405 / 12-20 | Sport / 09-20 | Velar / 17-20.
Engine Codes : 306DT | AJ-V6D/306DT

JLR Timing Tool Set
for 2.5 Diesel Engines - 200 / 300 TDI
Crankshaft Damper Puller
Injection Pump Gear Locking Tool
Injection Pump Timing Pin
Flywheel Timing Tool
DPS Pump Timing Tool
Flywheel Timing Tool
EDC Timing Pin - 30Q for manual gearbox
Combined Crankshaft Damper Puller and Fuel Pump Gear Locking Tool

JLR Balance Shaft Service Kit
for Jaguar / Land Rover 2.0L Diesel Engines
Designed for the removal / refitting and setting of the balance shafts
on the Jaguar Land Rover AJ200 2.0L Diesel Engines.
Applicable to:
Jaguar E-Pace / F-Pace / XE / XF
Land Rover Discovery / Sport
Range Rover Evoque / Sport / Velar

JLR Timing Tool Set
For Jaguar / Land Rover 2.0L Ingenium Diesel Engines.
Locks the engine into the timed position to remove the timing chain
for replacement and checking engine timing.
With Camshaft Holding Tool / Adjuster Locking Tool.
Crankshaft Pulley Locking Tool and Locking and Dismantling Tool.
Applicable to : Jaguar E-Pace / F-Pace / XE / XF.
Land Rover Discovery and Sport.
Range Rover Evoque / Sport and Velar.

JLR Timing Tool Set
for Land Rover / Range Rover 3.6L TD V8 Diesel Engines.
With camshaft and crankshaft locking tools.

Camshaft Alignment Blocks
Flywheel Locking Plate
Camshaft Rotating Pin
Crankshaft Timing Pin
Engine Codes : TDV8 | 368DT

Mercedes Timing Tool Set
For Locking Camshafts on Chain Drive 1.6 / 2.0 Petrol Engines.
Supplied with small and large diameter Clamp pieces
to ensure the camshaft is correctly held in place.
Includes T100 TP Star Bit for Camshaft Pulley.
For the removal and assembly of the camshafts.
Applicable to : Mercedes-Benz M133 / M270 / M274
found late A / B Class CLA | C and E Class vehicles.

Mercedes Timing Chain Guide Rail Pins Remover
for Mercedes-Benz 1.6L / 2.0L Petrol Engines from 2011.
Designed to extract the timing chain slipper guide.
Allows the removal of the pins with the minimum of disassembly.
Applicable to : A / B / C / E Class and GLA.

Mercedes Flywheel Locking Tool
for Mercedes-Benz - A / B Class and CLA / GLA
Designed to fit in place of the starter motor to lock the crankshaft
via the flywheel ring gear on the Mercedes-Benz engines.
Applicable to :
A class / 2013 - 2019 | B class / 2012 - 2019
CLA / 2013 - 2019 | GLA / 2014 - 2020

Mercedes Flywheel Retaining Tool
for Mercedes-Benz 1.8 | 2.1 M651 Diesel Engines.
Bolts in place of the starter motor to lock the flywheel
to prevent it turning when removing the crankshaft front pulley fixings
Applicable to : A / B / C / CLA / E / GLA / GLK / V Class - 2008
Also light commercials vehicles - Sprinter / Viano and Vito
OEM Code : 651589024000

Flywheel Locking Tool
for Mercedes / Renault / Dacia - 0.9L | 1.3L | 1.6L Petrol Engines
For locking the flywheel to allow easy removal
of the crankshaft pulley and flywheel bolts.
Applicable to : Mercedes-Benz A / B class / CLA / GLA / GLB.
Renault Arkan / Clio V / Captur / Kadar / Megane and Talisman.
Dacia Dokker / Duster and Lodgy

Timing Tool Set - Mercedes M282
For timing chain replacement and setting the timing on
Mercedes 1.3M 242.914 and Renault 1.3 LH5H -
chain driven twin camshaft 4 cylinder 1.3 Petrol Engines
OEM Code : 282589002300

Mercedes Timing Tool Set
Camshaft Locking Tools
for Mercedes-Benz - 1.8 | 2.1 CDi M651 Diesel Engines.
Applicable to :
A | C | E | M | S Class | CLA and GLK
Sprinter / SLK / Viano and Vito
OEM Codes : 651589004000 | 651589094000

Mercedes Timing Too Set
Mercedes-Benz Camshaft Valve Timing Kit
for 1.8 | 2.1 | 2.2 M651 Diesel Engines.
The kit enables the engine to be locked in its timed position
for the removal and refitting of the camshaft drive chain.
The kit includes the balance shaft alignment tool.

OEM Codes :
651589004000 | 651589014000 | 651589026300

Mercedes Timing Tool Set
Timing Chain Mounting Tool Set
for Mercedes-Benz M651 Diesel Engines
Allows precise positioning by preventing the timing chain skipping
and the camshaft sprockets moving when replacing the timing chain
without removing the camshaft sprockets.
Camshaft - Adjusting Tool and Special Wrench
Crankshaft Turning Tool
Sprocket Feet Shaft plus Screws
Timing Chain Guide Tool plus Screws

Mercedes Timing Chain Riveting Tool
For renewing and riveting timing chains on Mercedes-Benz Vehicles
Dismantling the timing chain case is often not required
as the new chain can be fed through using the existing chain.
Suitable for models with Duplex and Simplex timing chains with 4mm chain bolt.

Mercedes Timing Tool Set
for Mercedes-Benz M642 CDI Engines
Aligns the camshaft timing angle for correct position.
2 camshaft holding tools with 8 fixing screws
OEM number : 642589003100.

Mercedes Timing Tool Set
for Mercedes-Benz M276 | M157 | M278 Petrol Engines
to correctly align the camshaft timing angle.
OEM Code : 276589014000
See more info for the full list of Mercedes models.