Fuel Pipe and Connector Kit
95pc Fuel Pipe and Connector Set
Nylon fuel pipes / connectors / hose and clips in a handy organiser.
55 Fuel Pipe Quick Connectors.
9 Straight Couplings.
Nylon Pipes : 6 x 340mm | 8 x 340mm | 9.5 x 340mm.
Rubber Hose : 7.5 x 200mm | 12 x 200mm.
Ear Clips : 15-18mm | 17-20mm.
With Stainless Steel Pipe Cutter.
Hex / Spline / Star Bit Set - 88pc
88pc 1/2in.Dr Bit Set Assortment
30pc Hex Bit Set : 55 - 200 Long 1/2in.Dr
5 | 6 | 7 | 8 | 10 | 11 | 12 | 13 |14 | 17 | 19mm
26pc Spline Bit set : 55 - 200mm Long 1/2in.Dr
M5 | M6 | M8 | M9 | M10 | M12 | M14 | M16
32pc Star Bit set : 55 - 200 Long 1/2in.Dr
T20 | T25 | T27 | T30 | T40 | T45 | T50 | T55 | T60 | T70
Socket and Bit Set - 192pc
192pc Super Lock Socket Set
Ratchets : 1/4 | 3/8 | 1/2in.
Sliding T-Bars / Extension Bars / Universal Joints
Glow Plug Sockets : 16mm | 21 mm
Super Lock Sockets : 10 - 32mm
Deep Sockets : 4 - 22mm
E-Sockets : E4 - E24
Bits : Hex / Ph / Pz / SL / Spline / Star
Spanners : 4 - 14mm
Timing Tool Set - GM
GM 1.0 / 1.2 / 1.4 Petrol Engine Timing Tool Set
Camshaft Sensor Disc Setting and Locating Tools
Camshaft Inlet Adjustment Tool
Camshaft Locking Plate
Crankshaft Locking Pin
Belt and Chain Tension Pins : 2.5mm | 4mm
Suitable for the following Opel / Vauxhall models:
Adam / Ampera / Astra-J / Corsa-D / Insignia / Meriva-B / Mokka / Zafira-C / Aveo
Timing Tool Set - GM / SAAB
Timing Tool Set - GM
Opel / Vauxhall / Saab / Chevrolet
Turbo Twin Cam Petrol 2.0L / 2.4 L Engines.
For adjusting engine timing when replacing timing chain etc.
Crankshaft pulley alignment tool.
Camshaft locking tools / left and right side
Camshaft adjuster and flywheel holding tools
Tensioner retaining pins : 2.5 | 4.0mm
Tension plunger resetting and holding tools.
Drain Pan - 8L
8L Oil Drain Pan
Easy to clean durable plastic construction
with 8 Litre capacity ideal for antifreeze and oil.
Wide pan with pouring lip for clean disposal of fluids
plus shallow sides to allow easy positioning under vehicle.
Suitable for DIY use or the professional garage mechanic.
Oil Funnel / Adaptor Set - 15pc
15pc Engine Oil Filler Set
2L Funnel allows for fast oil filling without spillage.
Great for many late model vehicles with internal baffles.
Special angle extension with swivel feature for hard to reach places.
12 Bayonet / Thread and Twist Adaptors for most makes and models.
Clutch Alignment Tool Set
11pc Clutch Alignment and Adjustment Tool Set
Suitable for a wide range of vehicles and some light commercial vehicles.
Screw action provides fast adjustment for required hub diameter.
8 interchangeable spigot adaptors aid close alignment.
Adaptors : 12 | 14 | 15 | 16 | 17 | 18 | 19 | 20mm diameter.
Expanding mandrels : 15 - 19mm | 20 - 26.6mm | 23 - 36mm diameter.
Dent Puller Slide Hammer - Pneumatic
1.4kg Dent Puller Slide Hammer
with air powered suction cups : 60 | 120 | 150mm
Easily remove dents with the 1400g slide hammer.
1/4 BSP fitting with 330mm hose.
Air consumption : 113 L/min
Length: approx. : 620mm
Working pressure: 6.3 to 10.3 bar / 90 to 150psi
Garage Tool and Equipment Storage Unit
Garage Tool and Equipment Storage Installation
with Black powder coated finish.
0.8mm industrial cold rolled steel construction.
2 Full height cupboards with 4 shelves.
3 Overhead cupboards with gas struts.
2 Drawer units with ball-bearing slides /
drawer mats and central locking system.
Central cabinet with 1 shelf and lockable doors.
38mm MDF worktop with Pegboard Back Panels
Overall size : L 3250mm / H 1950mm / W 500mm