4pc Camshaft Adjuster Set
for Mercedes V6 / V8 - M152 / M157 / M276 / M278 Vehicles
Camshaft Position Sensor Reluctor Setting Tools
Used to mark pulse wheel on removed camshaft.
Can be used in conjunction with CT4076
OEM Code : 27

Mercedes Timing Tool Set
Camshaft Alignment Tool Set
For Mercedes-Benz M271 Petrol Engines
Used for engine timing and belt changing.
Also other camshaft related servicing

Mercedes Timing Tool Set
for Mercedes-Benz / AMG M156 | M159 Engines
For checking and adjusting engine timing.
With Camshaft Holding Tool
Adjusting Plate
Camshaft Adjusting Tool
Camshaft Gear Pre-tensioning Tool
Holds Basic position of camshaft at 40 degrees after TDC.

Mercedes Timing Tool Set
for Mercedes-Benz M112 | 113 V6 and V8 Engines
Allows the camshaft to be aligned and locked into position.
With intake and exhaust cam alignment jigs and the cam holding wrench.
Applicable to M112 | M113 V6 and V8 engines from 1998 onwards.

PSA Timing Tool Set
for Citroen / Fiat / Ford / Lancia / Peugeot vehicles
For adjusting the engine timing when renewing the timing belt
or replacing the cylinder head and gasket etc.
Suitable for engines :
Fiat / Lancia : 2.0 / 2.2 JTD
Ford : 1.4 / 1.6 Duratorq TDCI
Citroen / Peugeot 1.0 to 2.2 16V

PSA Timing Check Kit
for 1.2 GDI PureTech Belt Drive Engines
This kit provides an accurate and time saving method
to check the timing belt for deterioration and stretch.
Timing Belt Checking Gauge
Inlet Camshaft Timing Tool
Exhaust Camshaft Timing Tool
Crankshaft Locking Pin
Applicable to : Citroen / Peugeot / Toyota / GM

PSA Timing Tool Set
Citroen / Peugeot 1.0 / 1.2 VTI Petrol Engines
For setting the camshaft and Crankshaft in the correct TDC position
Citroen C3
Peugeot 208 | 308 / 2008
Engine codes : EBO | EB2 / HMZ
OEM Codes : 0109-2A | 0109-2B | 0197-N

PSA Timing Tool Set
for Citroen / Peugeot 1.8 | 2.0 - Belt Drive Petrol Engines
Features flywheel drive plate |
tensioner pulley adjuster and locking tool.
Many of the timing pins are also suitable for
other petrol / diesel PSA engines.

PSA Timing Tool Set
for Citroen / Peugeot Diesel / Petrol Engines
Also suitable for identical engines in
Fiat | Ford | Nissan | Renault | Rover | Toyota

PSA Timing Tool Set
For Citroen / Peugeot Petrol and Diesel Engines
Allows the correct engine timing when replacing the timing belt.

Vauxhall / Opel Timing Tool Set
For timing chain and valve train servicing on
1.0 12V | 1.0 16V | 1.2 16V | 1.4 16V Engines
on Agila / Astra / Corsa / Meriva / Tigra Models
With Camshaft Setting Plate
Crankshaft Locking Pin
Timing Disc Positioning Gauge
Chain Tensioner Locking Pin

Vauxhall / Opel Timing Tool Set
for 1.0 / 1.2 / 1.4 Petrol Engines
Tools for locking the cam and crank shafts in position
to allow the removal and replacement of the timing chain
fitted to the Vauxhall / Opel Vauxhall / Opel twin Cam engines.
Removal of the timing chain will require the removal of the sump.
Crankshaft Locking Pin and Camshaft Setting Plate
Camshaft Sprocket Holding Tool
VVT Sensor Setting Tools
2 Tensioner Locking Pins

Vauxhall / Opel Timing Tool Set
for 1.0 / 1.2 / 1.4 Petrol Engines
Camshaft Sensor Disc Setting Tools
Camshaft Inlet Adjustment Tool
Camshaft Locking Plate
Crankshaft Locking Pin
Belt and Chain Tension Pins : 2.5mm | 4mm
Suitable for the following Vauxhall / Opel models:
Adam / Ampera / Astra-J / Corsa-D / Insignia / Meriva-B / Mokka / Zafira-C / Aveo

Vauxhall / Opel Timing Tool Set
for 1.0 / 1.4 / 1.5 Petrol Engines and Turbo Petrol Engines
Camshaft Alignment Tool
Camshaft Alignment Plate
Balancer Shaft Alignment Tool
Applicable to :
Adam / Astra K / Corsa-E /
Insignia-B / Mokka-X and Viva ( Karl ) 2014 onwards

Vauxhall / Opel Timing Tool Set
For vehicles with 1.6 | 1.8 16V Engines.
With Camshaft & Sprocket Locking Tools
Flywheel Holding Tool
Locking Pins.
Applicable to : Astra-G | H | Corsa-D | Insignia | Mervia
Signum | Vectra-C | Zafira-B / 2003 - 2011
Also fits Chevrolet Cruze | Orlando 1.4.
Fiat Croma | Alfa Romeo 159 / 2003 - 2012.

Vauxhall / Opel Timing Tool Set
For 1.3 CDTI Corsa E Diesel Engines from 2015
For setting / adjusting engine timing and re-fitting the timing chain.
Crankshaft Flange Holding Tool
Crankshaft Locking Pin
Camshaft Locking Tools
Camshaft Sensor Disc Adjusting Tool
Timing Chain Cover Centring Tool
Timing Chain Tensioner Locking Pin

Vauxhall / Opel Timing Tool Set
For 1.6 SIDI | SIDI Turbo | SIDI Turbo EcoFLEX Engines
For checking and setting the engine timing when replacing the timing chain.
Camshaft Alignment Tool
Crankshaft Pulley Holding Tool
Balance Shaf

Vauxhall / Opel Timing Tool Set
For 1.6 CDTI EcoFlex Diesel Engines.
Allows setting and checking the engine timing when
replacing the cylinder head gasket and timing chain etc.
Camshaft Adjusting Pin
Camshaft Sprocket Retaining Tool
Crankshaft Alignment Tool
Chain Tensioner Unit Locking Pin
Drive Belt Tensioner Locking Pin
Astra / Insignia-A / Meriva-B / Mokka-X / Zafira-C

Vauxhall / Opel / Isuzu Timing Tool Set
for 1.6D | 1.7D Diesel Engines from 1987 to 2004.
Camshaft Locking Tool
Dial Gauge Indicator
M6 / M8 Locking Bolts
Injection Pump Locking Pin
Flywheel Locking Pin
Flywheel Timing Bracket
Flywheel TDC Setting Tool

Vauxhall / Opel / Saab Timing Tool Set
on 2.5 / 2.6 / 3.0 / 3.2 V6 Belt Drive EcoTec Engines
for locking the engine and checking timing marks
on V6 Belt Drive EcoTec Multi-Valve Petrol Engines.
Maintains crankshaft gear and camshaft sprockets
at TDC position for cam-belt work.
Features a belt guide roller adjuster.

Vauxhall / Opel / Saab Timing Tool Set
for 1.8 / 2.0 Petrol / Turbo Engine Chain Replacement
For twin camshaft engine chain replacement with -
Crankshaft Pulley Holding Tool
Camshaft Alignment Tool
Chain Tensioner Locking Pin

Vauxhall / Opel / GM / Saab Timing Tool Set
For 2.0 | 2.4 Turbo Charged Twin Cam Petrol Engines.
Timing Chain removal and replacement kit with -
Camshaft Adjuster and Flywheel Holding Tool
Tension Plunger Reset Tools
Used in Chevrolet / Opel / Saab / Vauxhall vehicles 2008 - 2015

Vauxhall / Opel / Chevrolet Timing Tool Set
for 2.0L Common Rail Diesel Engines.
Crankshaft and Camshaft positioning and locking tools
for setting the engine timing when changing the timing belt.
Engine Codes : Z20DM | Z20DMH
LLWZ20DMH | RA 420 | Z20S1 | Z20S3 | Z20S4 | Z20S5

Vauxhall / Opel / GM / Saab Timing Tool Set
For 2.0 | 2.4 Turbo Charged Twin Cam Petrol Engines.
Timing Chain removal and replacement kit with -
Camshaft Adjuster and Flywheel Holding Tool
Tension Plunger Reset Tools
Used in Chevrolet / Opel / Saab / Vauxhall vehicles 2008 - 2015

Vauxhall / Opel Timing Tool Set
For 2.0 CDTi EcoFLEX Engines
Allows servicing of the timing chain inside the cylinder head.
With Camshaft Alignment Tool
Chain Tension Locking Pin.
Suitable for Cascada / Insignia & Country Tourer / Zafira-C Tourer

Vauxhall / Opel Timing Tool Set
For 2.0 CDTi and 2.0 CDTi EcoFLEX Engines from 2014.
With Auxiliary Belt Tensioner Locking Pin.
Crankshaft Holding / Timing Tools.
Camshaft Locking Pin.
High Pressure Fuel Pump Sprocket Locking Tool.
Appicable to : Cascada / Insignia Tourer & Zafira-C Tourer

Vauxhall / Opel / Saab Timing Tool Set
for 2.0 | 2.2 EcoTec Diesel Engines
With Adjustment Wrench / Bracket
Injection Pump Timing Pin
Crankshaft Setting Pin
Camshaft Setting Plate

Vauxhall / Opel / Saab Timing Tool Set
For Fiat Chain Drive and Belt Drive Engines fitted to
Vauxhall / Opel / Saab 1.3 CDTi and 1.9 CDTi Vehicles.
Camshaft Alignment Tools
Crankshaft Timing Tool
Crankshaft Alignment Pin & Tools
Tensioning Pin

Vauxhall / Opel / GM Timing Tool Set
and Renault and Saab equivalent engines.
1.3 CDTi 16V | 1.9 CDTi | 2.0 DTi | 2.2 DTi Diesel
Also 1.0 12V / 1.2 / 1.4 / 1.6 / 1.8 / 2.0 / 2.2 16V Petrol
For Locking Camshafts / Crankshafts when changing
Timing Chains and installation of Injection Pumps
and Water Pumps on GM 4 cylinder engines.

Vauxhall / Opel Timing Tool Set
for 1.9 CDTI Diesel Engines
Timing and Locking Tool Kit for Camshafts and Crankshafts.
For Servicing and adjusting Timing belts -
includes Flywheel Holding Tool
Applicable to : 1.9 CDTI / TID / TTID & 2.0 CDTI / ECOFLEX

Vauxhall / Opel / Fiat Timing Tool Set
for 2.2 Chain Drive Petrol Engines.
Camshaft Locking and Setting Tool
Essential for engine timing when carrying out cylinder head work.
Engine Codes : Z22SE | Z22YH
OEM Codes : KM-6148 | KM-6077

Vauxhall / Opel Pump Sprocket Retainer
For 2.2 Chain Drive Petrol Engines.
Used to keep the engine in the timed position during
removal / installation of the coolant pump.
Allows the pump to be replaced without the timing chain being disturbed.
OEM Codes : J-43651 | KM-43651

41mm Water Pump Wrench - 1/2in.Dr
For use on older GM - Vauxhall / Opel engines
where the water pump is used to adjust the camshaft belt tension.
Also used on Chevrolet / Daewoo vehicles.
Engines : 1.2 / 1.3 / 1.4 / 1.6V / 1.6D / 1.8
OEM Codes : KM421A | J-42492 | J-42492-A

46mm Water Pump Wrench - 1/2in.Dr
For use on older Vauxhall / Opel engines
where the water pump is used to adjust the camshaft belt tension.
Engines : 1.6 ( 87 ) 1.7D / 1.8 ( 87 ) / 2.0 litre
OEM Code : KM409A

Cam Belt Tensioning Tool
T50 Star Bit - 1/2in.Dr
Allows access to the tensioner adjuster on
Renault K4M / K4J 1.4 and 1.6 petrol engines.
May be used with 1/2in.Dr Adaptor and Ratchet
OEM Code : MOT1368

Engine Timing Tool Set
for Renault / Volvo 16V and 20V Petrol Engines
with 1.6 | 1.8 | 1.9 | 2.0 | 2.3 | 2.4 | 2.5 litre twin cam engines.
Applicable to Renault Laguna / Safrane and Volvo vehicles

Renault Timing Tool Set
Petrol 1.2 | 1.4 | 1.6 | 1.8 | 2.0 | 16V | 2.5 20V DOHC
Clio | Espace | Kangoo | Laguna | Megane
Rapid | Safrane | Scenic | Trafic | Twingo
also Diesel 1.9 | 2.5 | 2.8
Opel Arena / Movano and Volvo V/S 40

Renault Timing Tool Set
For Dacia / Nissan / Opel / Renault Diesel and Petrol engines :
1.2 | 1.4 | 1.6 | 1.8 | 2.0 | 16V
1.5DCI | 1.6D |1.9TD | 1.9DCI | 1.9DTI | 1.9CDTI
2.1TD | 2.2DCI | 2.2DTI | 2.2TD | 2.5DCI | 2.5CDTI | 2.5TD | 2.8D

Renault Timing Tool Set
For 1.5 / 1.9 / 2.2 / 2.5 Diesel Engines
Also found in Nissan|Vauxhall|Opel vehicles.
for positioning and locking the crankshaft and camshaft
when servicing the timing belt and engine.
Inlet Camshaft Locking Tool
Injection Pump Locking Tool
Exhaust Camshaft Locking Tool.
Tensioner Tool Set in 3 parts
Crankshaft Timing Pins

Renault Timing Tool Kit
for Camshaft Regulation on 1.5 / 1.9 / 2.2 / 2.5 DCI Diesel Engines
Crankshaft Alignment Pin.
Exhaust Camshaft Alignment Tool.
Inlet Camshaft Alignment Tool.
Applicable to :
Renault Espace 2.2 DCI-Master 2.2 / 2.5 DCI
Opel : Astra-G 2.2 | Movano 2.2 | Vectra-B 2.2 | Zafira 2.2

Renault Camshaft Sprocket Locking Tool
Also for Nissan / Vauxhall / Opel 1.8 / 2.0 16V Petrol Engines.
Required for releasing the camshaft sprocket bolts
when timing engine after belt replacement.
Engine Codes : F4P | F4R
OEM Codes : MOT1509 | MOT1509-1 | MOT1801

Flywheel & Front Pulley Locking Tool Set
for 1.4 | 1.6 | 2.0 | 2.5 | 3.5 CD Petrol Engines
on Renault / Nissan vehicles.
Also for flywheel locking on M9R / 2.0 Diesel
and M9T / 2.3 Diesel Engines.
Engine Codes :
H4JT | M5M | MR4 | 2TR | V4Y

Renault Timing Tool Set
for 1.4 / 1.6 / 1.8 / 2.0 16V Belt Drive Engines
Suitable for timing belt replacement on
Renault and some Nissan and Vauxhall / Opel vehicles.
With Camshaft Rule and Locking Pins.
OEM Codes : MOT1489 | MOT1496 | MOT1054

Renault Timing Tool Set
Also for Nissan / Vauxhall / Opel vehicles
with 1.6 | 2.0 | 2.3 DCI / CDTI Chain Drive Engines
Crankshaft Pulley Holding Tool
Camshaft Adjusting Tool
Camshaft Gear Alignment Tool
Crankshaft Adjusting Tool
Chain Tensioner Locking Tool
Belt Tensioner Locking Tool
Engine Codes : M9R / M9T

Renault Timing Tool Set
For 1.6 DCi / CDTi Chain Drive Engines
Also for Nissan / Opel / Vauxhall vehicles
Includes - Crankshaft Pulley Holding Tool
Camshaft Adjusting Tool
Camshaft Gear Alignment Tool
Crankshaft Adjusting Tool
Chain Tensioner Locking Tool
Belt Tensioner Locking Tool.

Diesel Pump Setting and Timing Tool
for Renault / Mitsubishi / Opel vehicles with
F8Q and F9Q diesel engines and adjustable pump wheels.
27mm Hexagon Special Socket 1/2in.drive.
Setting tool with 3 x 4 mm pins to adjust the pump.
M10 to M8mm Adaptor for Bosch pumps.

Toyota / Mitsubishi Timing Tool Set
For 1.4 | 1.6 | 1.8 | 2.0 | 2.2 | 2.4 | 2.5 | 2.7 | 2.8 | 3.0 | 4.0 | 4.7 Engines
With Handle Puller & Belt Tension Tools
Crankshaft Pulley Holding & Drive Tools
Bolts / Screws & Adaptors.
Apicable to : 4-runner | Auris | Avensis | Camry
Celica | Corolla | Corolla verso | Dyna | Hiace | Hilux
Landcruiser | MR2 | Privia | Prius | Rav 4 | Scarlet | Yaris

VAG Service Position Front End Support Guide Set
Suitable for extending the front panel of the vehicle
to provide increased space in engine compartment
for carrying out various service applications.
Guides : M8 x 1.25mm / M10 x 1.5mm
Applicable to :
Audi : A4 / A5 / A6 / A8 /Q5
Skoda : Superb
VW : Passat

VAG Camshaft Adjuster Sockets - 3/8in.Dr
For the camshaft adjustment of 4/3-way central valve.
Fitted to : Audi A3 | A4 | A5 | Q5 1.8
and VW 2.0 litre engines with chain drive

VAG Camshaft Sprocket Locking Tool
VAG 1.0L TSI 3 cylinder petrol engines
For locking the camshaft in position during engine timing and servicing.

OEM Code : T10476
Common to : CT4424 | CT4622 | CT4651