2pc Exhaust Rubber Ring Tool Set
Hooked and 90 degree Flat
T-handles for extra leverage and rotation
Suitable for most vehicle rubber ring exhaust mountings

Exhaust Spring Clamp Removal Tool
Length : 150mm / 6in.
Use with a 17mm Spanner
For early VW vehicles : Golf | Jetta | Passat

3pc Pipe Expander Set
Works With all 1.1/8 - 3.5in. Thin Walls
Small Expander - 1 1/8 to 1 3/4in. / 28mm - 45mm
Medium Expander - 1 1/2 to 2 1/2in. / 38mm - 64mm
Large Expander - 2 1/8 to 3 1/2in. / 54mm - 90mm
Easily Straighten out Clamp dents in exhaust pipes

Exhaust Pipe Expander Kit
This kit provides the handy collets and expander required to stretch tailpipes
before making tight seals to pipes with smaller diameters.
Collets for a broad expansion range from 1-5/8in. to 4-1/4in.
Can be used with an impact wrench to quickly stretch pipes.

Exhaust Back Pressure Test Kit
This kit connects to the oxygen sensor port to monitor exhaust back pressure
allowing the testing of exhaust systems and catalytic converters.
May be used during test drive conditions.
Pressure gauge 0 - 20psi.
Connection hose 300cm with heat protection jacket.

6pc EGT Sensor Socket Set - 3/8in.Dr
For Exhaust Gas Temperature Sensors.
Sizes : 13 | 14 | 17mm Deep and Shallow.
For removing most EGT sensors used on
Cars / light / medium and heavy duty trucks.

3pc Cylinder Head Bolt Socket Set
Sizes : 10 | 12 | 14mm
1/2in.Dr | 120mm long Bi-Hex sockets.
Suitable for Toyota / Nissan and Honda engines.
CR-MO

Wi-Fi Endoscope - 5V DC
Suitable for pipeline inspection, air conditioning unit inspection,
venting systems and automobile applications.
Support System : IOS / Android
Camera Outer Diameter : 7.9mm
Image / Video Resolution : 2560 x 1440 / 1280 x 720.
Focal Length : 2 - 10cm
Frame Rate : 20fps
Viewing Angle : 70 degrees
Lights : 8 adjustable white LEDs

Digital Inspection Camera or Bore Scope
60mm Colour LCD Display with 640 x 480 JPEG resolution.
38in. watertight flexi-shaft with oil and scratch resistant glass lens.
16mm CMOS image probe.
LED lights.

Borescope with LCD Monitor
2M Cable / Probe Diameter - 5.5mm
NTSC and PAL Recording Format
Mini USB 1.1 AV out or Records on SD card up to 2Gb

50 - 160mm Bore Gauge Set
Self-centring measuring heads - Tolerance : 0.01mm
For the comparative measurements of the inner diameter of cylinders etc.
With Guide Bridge / Dial Bore Gauge / Measuring Rods
Spacer Rings / Extension Bar and Accessories.

Vacuum and Fuel Pump Pressure Tester
80mm gauge with rubber bumper.
Test Pressure up to 10psi
with 14 and 17mm manifold adaptors.
Test mechanical and electrical fuel pumps.
Check Fuel lines / Vacuum chokes and Heating.
Compatible with most vehicles.

Fuel Pressure Test Kit
Multi-meter | Leads | Test gauge
CM TBI adaptor | Banjo bolts
Angle adapter | multi-meter clips
1/4 and 5/16 hose and Clamps
Ford Schrader adaptor

Motorcycle Compression & Fuel Pressure Gauge Set
3 Gauges with Connectors and Adaptors for
testing motorcycle compression and fuel pressure.
Compression : 0 - 300psi | 0 - 2000kPa.
Fuel Pressure : 0 - 7bar | 0 - 1000psi.
Fuel Low

7pc Compression Test Kit
For checking the compression of single cylinders on Diesel and Petrol engines.
Suitable for most Vehicles and Motorcycles with Adaptors for :
M10 x 1.00 | M12 x 1.25 for motorbikes
M24 x 2 for Diesel Engines
M12 x 1.25 with 7 mm hole for VW Diesel engines
Multi-Valve Engines
M14 x 1.25 and M18 x 1.5
Maximum pressure : 6.8bar or 100psi.

3pc Petrol Engine Compression Test Kit
Fitted with 65mm diameter gauge
with 4 scales - Psi | Bar | kg/cm | kPa.
150mm Quick coupling with cone adaptor
320mm flexible adaptor with
14 and 18mm screw in adaptors.
Supplied with instructions.

Petrol Engines Compression Tester
65mm Gauge with dual scale : 0 - 300psi / 0 - 2000 kpa
Thread Size : M10 x 1.0 | M12 x 1.25 | M14 x 1.25 | M18 x 1.5
Straight and Angled Push-on Connectors
Flexible Extension - 400mm

Petrol Engine Compression Tester
For quick and easy diagnosis of combustion loss in -
Intakes / exhaust valves or cylinder head gaskets.
Adapters : M12 | M14 x 1.25
Hose adapters and extension with quick coupling.
Twin Gauges with air regulator.

Engine Compression Test Kit
Compression pressure testing up to 50 bar.
Suitable for most petrol and modern HDI / TDCI
pump injector and older diesel engines.
Quick couplings for straight or angled versions.
Glow plug adaptors | Spark plug adaptors M10 / M12 / M14 and M18.
Injector adaptors M20 / M22 / M24 and stanadyne injectors
Additional pressure gauge for pressure drop test.
Suitable for most cars / trucks / buses / agricultural and marine engines.

14pc Diesel Compression Test Set
Supplied with Gauge and Adaptors
Gauge reads 0-1000psi and 0-70bar with 368mm Hose and Release Valve

Diesel Engine Compression Test Set
for Direct and Indirect Injection
Dual Scale Gauge
Glow Plug Adaptors
Dummy Injectors
Stanadyne Dummy
Replacement Seal and Washer Set
90 Degree Elbow

Petrol Engine Compression Test Set
Thread Chasers : M10 | M12 | M14 | M18
with Dual Scale Gauge for direct and indirect injection engines.
For use on engines with deep seated plug ports with difficult access.
Built-in pressure relief valve enables repeat tests without dismantling.

Oil Pressure Test Kit
Helps to diagnose worn oil pumps and engines
faulty oil pressure switches and pressure warning indicators.
1M long flexible hose enables access to
difficult to reach oil switch ports.
Small profile quick coupling adaptors with built-in shut-off valve.
10 x oil switch port adaptors.
Gauge Scale 0 - 10 bar | 0 - 140psi.
80mm Diameter Gauge

Automatic Wave Box Pressure Meter
Diagnose problems with oil pressure in virtually all diesel and petrol engines.
Dual scale gauge : 0 - 500psi / 0 - 35bar
Hose : 1800mm 1/8 NPT oil proof.
Includes 1/4 and 3/8 NPT Adaptors.

Piston Ring Compressor
Depth 3in. / 75mm
Diameter : 60 - 175mm
with Hex Drive Key

60 - 175mm diameter Piston Ring Compressor

7pc Piston Ring Compressor Set
Ratchet Piston Ring Compressor Pliers with 6 Bands.
For compressing Piston rings in small increments
Enabling the installation of Piston rings ranging from 73 to 111mm.
Bands Swivel allowing use at various angles.

11pc Piston Ring Compressor Set
75mm High : 53 - 125mm.
90mm High : 90 - 175mm.
100mm High : 90 - 175mm.
Piston Ring Pliers : 50 -100mm.
Groove cleaning : 51 -127mm
3 Cleaning blades and Offset Driver

Small Engine Valve Tappet Adjusting Tool Kit
Sizes : 8 | 9 | 10mm 12 point offset wrenches
with 3 and 4 mm Square and Slotted Adjusters.
For servicing most Motorcycles / ATVs and ATCs.
with 4 stroke engines with screw type adjusters.
Honda | Suzuki | Yamaha
Chrome-Vanadium

Small Engine Valve Spring Compressor
Range : 3/4in. to 1-1/16in.
With 2 Jaw Sizes.
Heavy-duty frame and screw for rigidity.
Simple and Robust for -
Briggs and Stratton / Clinton / Harley-Davidson etc.

2pc Valve Lapper Set
Ideal for hand lapping small and large head unslotted valves
Use with lapping compound ( not supplied )
Suction Caps - 5/8 . 13/16 . 1-1/8 . 1-3/8in.

Air Operated Valve Lapping / Grinding Tool
Rubber suction cups : 20 | 30 | 35 | 45mm
Speed : 3000 rpm
with Adjustable Regulator for precise control.
Hose inner diameter : 10 mm
Air consumption : 1001/m
Designed for operating in tough environments.

Valve Lapping Tool Attachment
With 8mm shaft
4 suction cups : 20 | 30 | 35 | 45mm
Working speed : 1000rpm to 1250rpm max
Automatic change in direction.
Facilitates the insertion of valves.
For use with fine grinding paste.
Can be used with CT4429.

11pc Valve Seal Remover and Installer Kit
Valve Stem Seal Pliers
Drive Handle - 6in. / 150mm
Deep Seal Sockets - O.D 10.8 - 14.8mm
Adaptors : 5 | 5.5 | 6 | 6.5 | 7 | 8mm and 3/8in.

Valve Keeper Remover and Installer Kit
For Overhead Valve Engines with valve stems from 4.5 to 7.5mm or 5/16 to 3/8in.
Can be used on the car or work bench.
New smaller size works on Toyota four cylinder
and Chrysler New World engine applications.

Intermediate Lever Spring Removal Tool
for BMW N13 / N16 / N20 / N26 / N52 / N55
Designed to remove and install the intermediate shaft control spring
used in the VVT system found on BMW petrol engines.
BMW 1 / 2 / 3 / 4 / 5 / 6 Series

BMW Intermediate Lever Spring Service Tool Kit
For the Removal and Refit of the intermediate shaft control springs
used on the VVT - Variable Valve Timing System found in
BMW and MINI - B38 3 cylinder 1.5L petrol engines
and BMW and MI

Overhead Valve Spring Compressor
Compress Overhead Spring with rocker arm studs.
Use with the head either On and Off the engine.
Fits Most Overhead Engines
Adjustable handle allows for clearance even in tight areas
Overall length : 320mm

Valve Spring Compressor 35 - 200mm
For large petrol or Diesel engines
2 Valve spring pressure pieces:
outside diameter : 25 mm for spring diameter : 21 - 25 mm
outside diameter : 30 mm for spring diameter : 24 - 30 mm
Chrome plated

Multi-Valve Spring Compressor
Universal Jaw with 55 - 175mm capacity and 165mm throat depth.
For use on petrol and diesel engines with deep-seated valves.
Suitable also for general use on OHC / OHV and CVH engines.
Reversible jaw and a

Valve Spring Compressor Kit
5 Adaptors for various spring diameters
16 | 19 | 23 | 25 | 30mm or 5/8 to 13/16in.
Forcing Screws : 70 | 110 | 120mm
Also include Telescopic Pick-up Tool and Tweezers.
Ideal for Motorcycles and Small Bore Engines

Universal Valve Spring Compressor
Complete upper engine service kit
enables in-situ removal and replacement of
valve springs / guides and seals
Suitable for 8 | 16 and 24 valve engines.
With Collet Tool | Valve Stem Seal Pliers
and Valve stem seal replacement kit

Universal Valve Spring Installation Kit
Ideal for use in restricted space conditions.
Specially designed to remove / install the valve springs
and oil seals in most vehicles by using pressurized air to close the valve ports.
Suitable for BMW / Ford / Mercedes / Mitsubishi / Toyota and VAG vehicles.

Air Valve Spring Compressor Set
Prevents the engine valve from falling into the body
due to counter pressure caused by air delivered via a spark plug-thread.
Suitable for spark plug threads M14 x 1.25 and M18 x 1.5
Extensive accessories.
Operates with 10mm / 3/8in. drive T-handle or Ratchet

PSA Valve Spring Tension Tool
for Citroen / Peugeot Vehicles
Suitable for 1.0 | 1.1 | 1.4 | 1.6 Petrol Engines in -
Citroen Xsara and Berlingo
Peugeot 106 | 205 | 206 | 306 | 307 | 405

Valve Adjustment Socket for Mercedes-Benz
Size : 17mm x 1/2in.Dr
Special Socket for Mercedes-Benz Valve Adjustment.
Applicable to : M100 | 110 | 114 | 115 | 123 | 130 models.

11pc Valve Seat Cutter Set
with T-Handle
5 Milling Heads : 32.5 | 35 | 37.5 | 40 | 42.5mm
5 Stem Guides : 6.5 | 7 | 7.5 | 8 | 8.5mm
NOT suitable for hardened valve seats.
Ideal for Vintage Cars and Motorcycles.

2 Cylinder Head Stands
Support stands that locate into the cylinder head via the stud holes
Provides the clearance between head and workbench when reaming valve guides.

Guide Rail Pin Puller - Mercedes Benz / BMW
For Removing Stubborn Pins from Cylinder Heads
Ideal for those tight problem areas.
85mm puller incorporates a thrust bearing to ease the pulling action.
Screws : 2 - M8 x 1.25 | 29mm deep
2 - M8 x 1.25 / M6 x 1.0 | 29mm deep
2 - M8 x 1.25 / M5 x 0.8 | 29mm deep

VAG / Porsche Diesel Head Rebuild Jig
for fitting camshafts into cylinder heads during head rebuilds.
Applicable to VAG and Porsche vehicles with diesel engines
Now in a EVA tray.