Flexible Engine Cylinder Hone
Range : 68 - 70mm / 120 Grit
Shaft diameter : 6.5mm
Max. drive speed : 300rpm
For cleaning and deglazing the walls of cylinders.
Also ideal for surface finishing bores
that have been honed to size with a rigid hone.

Flexible Engine Cylinder Hone
Range : 68 - 70mm / 180 Grit
Shaft diameter : 6.5mm
Max. drive speed : 300rpm
For cleaning and deglazing the walls of cylinders.
Also ideal for surface finishing bores
that have been honed to size with a rigid hone.

Flexible Engine Cylinder Hone
Range : 75 - 77mm / 120 Grit
Shaft diameter : 7.8mm
Max. drive speed : 300rpm
For cleaning and deglazing the walls of cylinders.
Also ideal for surface finishing bores
that have been honed to size with a rigid hone.

Flexible Engine Cylinder Hone
Range : 75 - 77mm / 180 Grit
Shaft diameter : 7.8mm
Max. drive speed : 300rpm
For cleaning and deglazing the walls of cylinders.
Also ideal for surface finishing bores
that have been honed to size with a rigid hone.

Flexible Engine Cylinder Hone
Range : 81 - 83mm / 120 Grit
Shaft diameter : 7.8mm
Max. drive speed : 300rpm
For cleaning and deglazing the walls of cylinders.
Also ideal for surface finishing bores
that have been honed to size with a rigid hone.

Flexible Engine Cylinder Hone
Range : 81 - 83mm / 180 Grit
Shaft diameter : 7.8mm
Max. drive speed : 300rpm
For cleaning and deglazing the walls of cylinders.
Also ideal for surface finishing bores
that have been honed to size with a rigid hone.

Flexible Engine Cylinder Hone
Range : 87 - 89mm / 120 Grit
Shaft diameter : 7.8mm
Max. drive speed : 300rpm
For cleaning and deglazing the walls of cylinders.
Also ideal for surface finishing bores
that have been honed to size with a rigid hone.

Flexible Engine Cylinder Hone
Range : 87 - 89mm / 180 Grit
Shaft diameter : 7.8mm
Max. drive speed : 300rpm
For cleaning and deglazing the walls of cylinders.
Also ideal for surface finishing bores
that have been honed to size with a rigid hone.

Flexible Engine Cylinder Hone
Range : 94 - 96mm / 120 Grit
Shaft diameter : 7.8mm
Max. drive speed : 300rpm
For cleaning and deglazing the walls of cylinders.
Also ideal for surface finishing bores
that have been honed to size with a rigid hone.

Flexible Engine Cylinder Hone
Range : 94 - 96mm / 180 Grit
Shaft diameter : 7.8mm
Max. drive speed : 300rpm
For cleaning and deglazing the walls of cylinders.
Also ideal for surface finishing bores
that have been honed to size with a rigid hone.

2pc Brake Caliper Seal Groove Cleaner Set
200mm Long with different heads
For removing dirt and debris from seal ring grooves.

2pc Scraper Set
with Black electroplated shafts and Tungsten Carbide Tips
Blade Width : 16mm | 32mm. Handle : 150mm
For use on brake Calipers and back plate sliding faces,
exhaust manifolds, cylinder heads, gaskets
or any area to remove corrosion and debris.
Double edged tungsten carbide tipped blades,
remain very sharp and are precision ground.

Cambelt Tension Gauge
Precise Measurement
Universal - Suitable for Cambelts of various widths
Dual Direction Rotating Scales with Clear Incremental Markings

Sonic Belt Tension Tester
Portable Flexible Probe Tester
Frequency Range : 10 - 600Hz
Includes 20 Memory / Data Storage Settings.
Automatic Power-off when no operation for 5 minutes.
Power off by pressing ON / OFF switch for 2 seconds.
Power Source : 2 AAA battery / not included.

Mercedes Auxilliary Belt Tensioner Tool
For tensioning and loosening the damper spring without damage.
on Mercedes-Benz W169 | W245 Engines
with air conditioning and / or stop-start function :
Suitable for following vehicles :
A-C

Mercedes V-Belt Tensioning Tool
For setting the tension wheel and fitting the ribbed belt.
Suitable for Mercedes models : 168 | 169 A-Class | 245 B-Class
Length : 620 mm
Size : 15mm

Timing Belt Tension Setting Tool Kit
for engine compartments with restricted access.
Ideal for releasing tension on serpentine belts.
Suitable for most vehicles.
3/8in.Dr x 580mm Long with 1/2in.Dr extension
3/8in.Dr Crowfoot Wrenches : 13 | 14 | 15mm
3/8in.Dr Sockets : 15 | 16 | 18mm

Subaru Crankshaft Socket
1/2in. Drive
For aligning the crankshaft to T.D.C
when working on timing chain servicing or replacement
on 3 or 6 cylinder DOHC engines.
For Subaru models 2006 - 2012 - 2015.

5pc Cambelt Tension Pulley Wrench Set
E-Star Sizes : E10 | E12 | E14 | E16 | E18
For biasing the auxiliary belt tension off and on
during installation of the belt in the vehicle.
Slim curved handle for use in confined spaces.

VAG Camshaft Adapter Socket
3/8in. Drive / S45C Steel.
Use to rotate and hold the intake camshaft during timing chain service
on 4 cylinder 1.8L and 2.0L TFSi generation III direct injection engines.

15pc Cambelt Tension Wrench Set
With Interchangeable Heads
for tensioners on auxiliary and timing pulleys.
Includes bar with locking system.
Star : E10 | E12 | E14 | E16 | E18
Sizes : 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19mm

9pc Cambelt Tension Wrench Set
with Interchangeable Heads
For tensioners on auxiliary and timing pulleys
Sizes : 12 to 19mm
Includes bar with locking system.

VAG Fuel Pump Sprocket Puller
For the removal of the high pressure pump sprocket.
on 1.6L and 2.0L TDi common rail diesel engines.
Also for removing the Pump Pulley on
1.6 / 2.0 - 6 cylinder TDi common rail diesel engines
OEM Code : T40064

Stretch Belt Installation Tool
For PSA / Vauxhall / Opel and Toyota
1.0L and 1.2L 3 cylinder engines from 2012.
Simple and effective method of installing the stretchy type water pump belt.
Ensures correct installation of the elastic belt
whilst reducing the risk of damage to the drive belt.
OEM Codes : 0109-1B | EN-52112-2

Auxiliary Stretch Belt Removal Tool
BMW | Chrysler | Citroen | Fiat | Ford |
Iveco | Mazda | Mercedes | Peugeot | Volvo

Universal Stretch Belt Tool Kit
For use mainly on 1.4 and 1.6 petrol engines
when the double width crankshaft puller restricts access
preventing the belt from being removed or installed.
Use with a 17mm socket.

5pc Damper Pulley Wrench Set
18in. / 460mm Long
for holding and retaining the auxilliary belt pully in place.
Sizes : 13 | 15 | 16 | 17 | 19mm
Ideal for use in confined spaces were access is restricted.
Suitable for all European Vehicles

Air Condition Belt Installation Tool
for BMW N62 / MINI W17
For installation of stretch belts or drive belts without tensioner
Suitable for stretching belts on -
BMW N62 / V8 2004 - 2006
MINI W17 / Diesel
OEM Code : 641040

32mm Fan Clutch Nut Wrench
BMW Water Pump Removal Tool Kit
32mm Fan Clutch Wrench
Double-ended Water Pump Fan Pulley Holder
For removing water pumps on models with
temperature dependent viscosity drive fans.
Removes lock nuts on thermo-Viscous fans.

41mm Fan Hub Wrench for GM / Opel
278mm Long
For moving the water pump on GM / Opel vehicles
in order to span the drive belt in OHC engines.
Especially slim design with PVC dipped handle
Enables easy access

46mm Fan Hub Wrench for GM / Opel
278mm Long
For moving the water pump on GM / Opel vehicles
in order to span the drive belt in OHC engines.
Especially slim design with PVC dipped handle
Enables easy access

10pc Fan Clutch Wrench Set
With Fan Pulley Holding Tools
Fan Clutch / Nut / Hub Wrenches
Range from 37mm to 83mm
Range from 1-7/16 to 3-1/4in.

Pneumatic Fan Clutch Wrench Set
for use with Air Tools
Wrench Sizes : 32 | 36 | 40 | 47 and 7/8 | 1-7/8 | 2in.
For removing and installing the fan clutch
when repairing the water pump or fan clutch.
Compatible with Ford / GM / Chrysler and Jeep vehicles.
With Carry Bag.

Ford A/C Compressor Clutch Pulley Retaining Tool
3/8in.Dr - Required when changing the A/C pump or pulley.
Applications : Ford vehicles 2010 - 2015
C-Max / B-Max / Ecosport / Edge / Fiesta / Focus
Galaxy / Kuga / S-Max / Transit Courier
OEM Code : 412-134

Ford A/C Compressor Clutch Pulley Retaining Tool
3/8in.Dr - Required when changing the A/C pump or pulley.
Holds the compressor pulley still allowing the fixing bolt to be removed.
Ford vehicles 2010 - 2017
C-Max / Focus / Kuga / Transit Connect / Courier / Ka / Fiesta.
OEM Code : 412-154

Ford A/C Compressor Clutch Pulley Retaining Tool
3/8in.Dr - Required when changing the A/C pump or pulley
Holds the compressor pulley still allowing the fixing bolt to be removed.
Ford vehicles from 2012 -
Transit and Transit Custom Hybrid PHEV.
OEM Code : 412-157

Ford A/C Compressor Clutch Pulley Retaining Tool
3/8in.Dr - Required when changing the A/C pump or pulley
Holds the compressor pulley still allowing the fixing bolt to be removed.
Ford vehicles from 2008 - 2015
Fiesta / from 2008
B-Max / from 2012
C-Max / from 2010 & 2015
OEM Code : 412-103

Universal Camshaft and Crankshaft Pulley Holder
Holds camshaft or diesel pump sprockets and gears
for removal and tightening of retaining bolts.
Interchangeable pins : 3.5 | 4 | 4.5 | 5 | 6 | 7 and 10mm.
Wrench swivels to adjust from 32 - 127mm
1/2in.Dr for use with ratchets or power bars.

Exhaust Camshaft Holding / Adjusting Tool
for EB2ADTS Engines in
Citroen / Opel / Peugeot / Toyota Vehicles
Suitable for the following engine codes:
EB2ADTS | HNS | D12XHT | F12XHT
OEM Codes : 2000037072
0109-2E / 0109-2E1 | 01092E / 0109-2E2

Camshaft Belt Pulley Tool
Mini Cooper Serpentine Belt Tool - R50 / R53
For loosening the camshaft pulley then using the
pin to lock the camshaft pulley tensioner in place
allowing the removal and replacement of the timing belt.
Applicable : BMW Mini Cooper - R50 / R53
BMW engine W10/W11

Camshaft Belt Pulley Tool
Mini Cooper Serpentine Belt Tool
For loosening the camshaft pulley then using the
pin to lock the camshaft pulley tensioner in place
allowing the removal and replacement of the timing belt. br> Applicable : BMW Mini Cooper engine S/W11

Flat Belt Tension Spanner Set
For BMW / Mini engines EP3 / EP6 / N12 / N14 / N16 and N18 >2007
For releasing the tension when removing and installing the serpentine belt.
Wrench Sizes : 21mm / 30mm with 12-point drive
OEM Code : 116210

Auxiliary Belt Tension Spanner
VAG 1.4 Tsi / TFSi Belt Drive Petrol Engine
Designed to provide access to the auxiliary belt tensioner.
1.4 direct injection 4cyl TSi and TFSi Blue Motion engines.
VAG OEM Tool : T10447

Heavy Duty Pulley Puller
Adjustable Jaw Tension
Pulls pressed-on 1 and 2 groove pulleys
For Alternators and Power Steering Pumps / also Alternator Bearings

3 Jaw Pilot Bearing Puller
Suitable for sleeve-type bearings : 16 - 50.8mm diameter.
Ideal for flywheel bearings / pump bearings and generator / starter bearings without tilting the bearings or damaging the bearing race.
For servicing motor vehicles / motorcycles and lawn mowers etc.

2 Jaw Pulley Remover
Jaw Length : 72 - 95mm
Jaw Depth : 18mm
Ideal for most vehicles and for use in confined spaces.

Universal Pulley Puller
18mm pulling legs.
8 Slots for holding pulling legs in different positions.
16mm Diameter spindle with cantering ball.
Use with 24mm Socket or Spanner.
Draws pulley by the holes without causing damage.
Movable legs adapt to different pulley diameters.
Suitable for different bolt patterns and distances.

Power Steering Pump Pulley Kit
For Ford | Chrysler and GM vehicles
With Saginaw / Thompson/ Ford C111
and C2 power steering pumps.
Fits many pulley hub diameters including
engines with a metric shaft.

Pulley Puller and Installer Set
Removes pressed-on alternator and power steering pulleys
For late model GM / Ford and Chrysler engines
Adapters for Quad 4 engines
Adapters for Ford modular engines

Puller for Ribbed Drive Pulleys
Length - 200mm | Height - 80mm
Low Profile suitable for most vehicles
Knurled Screws - included
Hex Keys