BPW Axle Extractor - M136 x 2.5
Extremely robust European truck repair tool applicable to :
BPW ECO Plus 8 - 12 ton and BPW ECO 10 ton models.
Used in combination with 43mm and 30mm spanners
Inner size : M136 x 2.5mm
Outer size : 150mm

Extension Tube for MAN TGA Rear Axle
For the removal and installation of wheel hubs.
Protects the wheel bearing and threaded bolts.
With knurling and bore for Tommy Bar.
Thread : M100 x 1.5 | Inner Size : 95mm | Outer Size : 105mm | Length: 360mm
Applicable to MAN TGA Rear Axle / HY-1350

MAN Truck Axle Bearing Extractor
For removing and replacing MAN truck hub bearings.
Turn the screw and remove the old bearing.
Use with 30mm wrench
Applicable to MAN Truck Hub bearings.

MAN Truck Front Wheel Hub Installer
For axle bearings that are stuck due to over heating.
Can be used in conjunction with an air wrench for easier removal.
Suitable for pulling off wheel hubs with 166mm hole diameter.
Ideal European truck repair tool with extremely robust execution.
Disc size : 87 x 166 x 118mm

20 Ton Hydraulic Shop Press
Floor Standing Heavy Duty H-Frame
Stroke : 160mm
Work Range : 0 - 998mm
G.W. : 104kgs
N.W. : 102kgs
Package Size : 1630 x 190 x 320mm
Ideal for Straightening / Bending and Stamping

30 Ton Hydraulic Shop Press
Floor Standing Heavy Duty H-Frame
Ideal for Straightening / Bending and Stamping

50 Ton Hydraulic Shop Press
Floor Standing Heavy Duty H-Frame Construction
Capacity : 50 Tons
Working Range : 0 - 1000mm
Ram Stroke : 185mm
Air Pressure : 110 - 120psi
Air Inlet : 1/4in. NPT
Ideal for straightening / Bending and Stamping.

Universal Hydraulic Press Support Block
For use with a workshop press
Guarantees a perfect and safe support
Length: 2750mm
Width: 210mm

6pc Hydraulic Press Accessory Kit
For use with up to 50 Ton press
Constructed from high quality material to ensure long lasting durable performance.
Kit Includes :
3 x Punches : 1/2 | 1 | 1-7/8in.
2 x Steel press plates : 14 x 3 x1in.
1 x Bearing shield
Can be used in a variety of press applications.

14pc Wheel Hub Grinder Set
10 Grinding Discs 40mm diameter / 14mm deep.
Drive Connector : 1/4in. / 6mm shank
1/2in.Dr - 8mm Hex Adaptor
Made from Nylon and carborundum.
For removing rust and road debris from wheel hubs and brake discs.

7pc Wheel Hub Grinder Set
6 Grinding Discs 40mm diameter / 14mm deep.
Drive Connector : 6mm shank
Made from Nylon and carborundum.
For removing rust and road debris from wheel hubs and brake discs.

Impact Drive Stud & Hub Cleaning Tool Set for HGVs
For Air or Power Impact Wrenches with 1/2in.Dr
Suitable for HGV wheel studs up to 28mm diameter
with a maximum length of 80mm.
With Impact Drive Locking Sleeve and Disc Adaptor.
6 Abrasive Discs :
50 x 12 | 50 x 13 | 50 x 14mm.
60 x 16 | 60 x 22 | 60 x 28mm.

Rotary Abrasive Hub Cleaning Tool - 1/2in.Dr
Suitable for vehicle wheel hubs up to 150mm diameter
Optimized for wheel hubs with enlarged inner 90mm diameter.
For quick and easy removal of dirt and rust from wheel hubs
and brake discs with wheel support bolt.
Quick cleaning of the contact surfaces.
For use with air impact or power / cordless tools - 1/2in.Drive
Interchangeable abrasive velcro disc replacement - CT6186

Rotary Abrasive Hub Cleaning Disc
or Grinding Wheel
Replacement Disc for CT6185
Inner diameter : 90mm / Outer diameter 150mm