Section 5.41

Axles, Wheel Bearings & Hubs

Wheel

CT3572

Wheel Bearing Installation Kit

Wheel Bearing and Seal Installation Kit
New lightweight design to prevent damaging the bearing or housing.
Contains 3 metal bearing drift sleeves
and 34 nylon drifts with Deadblow Hammer.
Can also be used to install oil seals.
Fits most modern vehicles

Wheel Bearing Installation Kit
t Click picture for more information
Bearing

CT3948

Bearing and Bushing Seal Driver Set- 51pc

51pc Bearing and Bushing Seal Master Driver Set
Suitable for mounting bearings | bushings and sealing rings.
220mm knurled handle grip for use with a hammer.
Particularly useful when used with a hydraulic press.
Support Disc - 74 mm |

Bearing / Bushing and Seal Driver Set
t Click picture for more information
Bearing

CT3510

Wheel Bearing Lock Nut Wrench

Wheel Bearing Lock Nut Wrench
Adjustable jaws with locking feature
to suit both hexagon and octagon wheel bearing lock nuts.
6 point lock nuts 49 - 135mm
8 point lock nuts 49 - 143mm
Pin diameters 6mm / 8mm / 10mm

Bearing Lock Nut Wrench
t Click picture for more information
Wheel

CT6375

Wheel Bearing Circlip Tool

Wheel Bearing Circlip Removal / Assembly Lever Tool
Unique lever tool with specially shaped hook that allows
the easy removal and fitting of wheel bearing internal circlips.
Applicable to Vauxhall / Opel / Ford / PSA / Fiat and VAG vehicles.
Ideal for use on the Vauxhall Adam and Ford Kuga,
also suitable for Ford DCT clutch pack internal clip,
superb for clips without circlip holes.

Wheel Bearing Circlip Tool
t Click picture for more information
Wheel

CT6357

Wheel Bearing Ring Puller - 68mm

68mm Bearing Inner Ring Puller
For removing the inner wheel bearing rings on wheel hubs.
The bearing rings usually remain on the wheel hub
when the wheel bearings are removed.
Integral Clamp holds the puller legs
securely behind the component to be removed.
Pressure piece diameter : 25 x 30mm
Puller width : 68mm
Puller depth : 60 mm

Wheel Bearing Ring Puller - 68mm
t Click picture for more information
Bearing

CT3385

Bearing Extractor Set

Bearing Extractor Set - 16pc Puller and Slide-Hammer
Screw Adaptors - M6 x 1.0 / M8 x 1.25 / M10 x 1.5
Collets - 8 - 11mm / 12 - 17mm / 18 - 23mm / 24 - 29mm
30 - 34mm / 34 - 38mm / 39 - 43mm / 44 - 48mm / 49 - 53mm / 54 - 58mm

Bearing Extractor Set
t Click picture for more information
3

CT0391

Bearing Puller Set - 3pc

3pc Bearing Puller Set
Sizes : 3 | 4 | 6in. with Reversible 3 Leg Jaw

3 Bearing Pullers in a box
t Click picture for more information
Bearing

CT3245

Bearing Puller Set - 5pc

5pc Bearing Puller Set
Bearing extractor collets with internal capacity from 11 to 32mm Collets : 10 - 14mm | 15 - 19mm | 18 - 25mm | 25 - 32mm
3/8 - 1/2in. | 9/16 - 11/16in. | 5/8 - 1in. | 1 - 1-1/4in.
Slide Hammer - 377mm / 0.85kg

Bearing Puller Set
t Click picture for more information
Wheel

CT3571

Wheel Bearing Puller Set

5pc Wheel Bearing Puller Set
Internal and External 3-Jaw Pullers
External puller 15mm - 80mm
Small Internal puller 15mm - 30mm
Large Internal puller 30mm - 80mm
Slide Hammer to aid pulling out the bearing.

Wheel Bearing Puller Set
t Click picture for more information
Wheel

CT3758

Wheel Bearing Puller Set - 9pc

9pc Bearing Puller Set
Removes gears / pulleys and steering wheels.
3lb Slide Hammer with T-handle - 390mm
8 - 10 | 10 - 12 | 12 - 14 | 15 - 17 and
17 - 20 | 20 - 24 | 25 - 29 | 30 - 32mm

Wheel Bearing Puller Set - 9pc
t Click picture for more information
Wheel

CT2071

Wheel Bearing Tool Set

31pc Wheel Hub and Bearing Service Tool Set
Allows Servicing to the wheel hub and wheel bearings.
Pressure Plates -
50 | 55 | 59 | 63.3 | 66.6 | 70.3 | 71.5 | 73.1 | 73.4 | 74.8 | 77.5 | 81.5 | 83.4mm
Sleeves with following diameters : 76 | 86 | 91 | 102mm
Extractor bolts M12 x 1.5 | M14 x 1.5
Spindle 7/8 x 300mm including thrust bearing
Pressure nut 32 x 60mm and Pressure sleeve 38 x 40mm

Wheel Hub and Bearing Serive Tool Set
t Click picture for more information
Bearing

CT1496

Bearing Separator Set

Bearing Separator Set
2 Sizes : 50 and 75mm
4 Sets of Hex Push-Puller Legs and Bar-Type Puller Head
125mm Puller Cross-Bar with 160mm Forcing Screw

Bearing Separator Set
t Click picture for more information
Bearing

CT1498

Bearing / Gear Puller Set - 14pc

14pc Bearing Splitter and Gear Puller Set
With various threaded connector bolts | Bearing Separators | Pawls and Push Rod

Bearing Gear Puller Set
t Click picture for more information
Bearing

CT6292

Bearing Separator Set

Bearing Separator
Drop forged
Clamping Width : 46mm - 230mm max
Clamping Bolt Length : 350mm / Distance : 224mm / Thread : M25 x 2.5
Puller Bolt : 3/4in. x 10 UNC
Puller Bolt distance : 164mm / 350mm max
Splitting Knife Base : 102mm - 288mm max
Suitable for removing bearings / gears and bushings from shafts.

Bearing Service Kit
t Click picture for more information
Bearing

CT2289

Bearing Service Kit - 19pc

19pc Front Wheel Drive Bearing Service Kit
For the removal and installation of front hub bearings
without the need to dismantle the steering assembly.
Heavy Duty Steel Drifts : 55.5. to. 91mm

Bearing Service Kit
t Click picture for more information
Bearing

CT3503

Bearing Service Kit - 19pc

19pc Wheel Hub and Bearing Service Kit
For fitting modern GEN2 Wheel Hub Bearing Units
where the Hub and Bearing are a combined unit.
M18 Pulling Spindle with nuts and thrust bearings.
Heavy Duty Steel Drifts
May be used in conjunction with a Hydraulic Shop Press.

Bearing Service Kit
t Click picture for more information
Bearing

CT2107

Bearing Service Tool Kit

Bearing Service Tool Kit for Front Wheel Drive Vehicles

Bearing Service Tool Kit
t Click picture for more information
Front

CT3877

Front Wheel Bearing Service Kit

25pc Wheel Bearing Installation Set
Front wheel drive vehicles 60mm to 85mm.
Reduces chances of damage to hub and bearing.
Heavy duty steel drifts.
For use with impact tools.
Also suitable for industrial bearings.

Front Wheel Bearing Service Kit
t Click picture for more information
VAG

CT5575

Wheel Bearing Tool Set - VAG

18pc Silent Bearing Tool Set for VAG Rear Axles
For assembly and disassembly of bearings both on and off the vehicle.
For the replacement of silent bearings from the wheel bearing housing
axle guide / trailing arm / wishbone lower / internal as built in
push rod and the upper wishbone not built-in.
For use alongside mechanical spindle.
Applicable to most Audi / VW / Seat vehicles

VAG Rear Wheel Bearing Tool Set
t Click picture for more information
Wheel

CT3399

Wheel Bearing Tool Set - Audi/VW

VAG Wheel Bearing Tool Set
For mainly Audi / VW vehicles
Clamping nut | Pull spindle |
Bearing cover | Housing | Adaptor ring.
Centring Rings 34 to 80mm
Pressure Rings 65 to 85mm
Retainer adaptors for Clamping nut
Pressure spindle and Mechanical spindle

Wheel Bearing Tool Set
t Click picture for more information
Wheel

CT3400

Wheel Bearing Tool Set Mercedes

Mercedes Wheel Bearing Tool Set
A | B | C | E | M | V Class | 190 series | W124
Pulling spindle | Bearing cover | Adaptor ring
Centring Rings - 42 to 80mm Diameter
Pressure Rings - 66 to 93mm Diameter
Pressure spindle with O-ring and mechanical spindle
A Professional way to remove and replace wheel bearings.

Wheel Bearing Tool Set
t Click picture for more information
Wheel

CT6387

Wheel Hub Bearing Unit Tool - PSA

Wheel Hub Bearing Unit Tool Kit
for Citroen / Opel / Peugeot / Toyota Vehicles
For pressing out and fitting compact wheel bearings on
the rear axle without removing the axle knuckle and ABS sensor.
For changing the complete Wheel Bearing / Hub Unit
on the rear axle without removing the axle leg.
The whole procedure takes place directly on the vehicle.
Suitable for compact wheel bearing numbers :
9819074780 | SU001A6528
FAG : 713 6506 80 | SKF : VKBA 7120

Wheel Hub Bearing Unit Tool
t Click picture for more information
Wheel

CT3401

Wheel Bearing Tool Set - Renault

Peugeot-Citroen-Renault Wheel Bearing Tool Set
Pulling spindle | Bearing cover | Adaptor ring.
Centring Rings - 35 | 37 | 42 | 45 | 60 | 75mm
Pressure Rings - 65 | 72 | 82 | 83mm
Pressure spindle with O-ring and mechanical spindle
A Professional way to remove and replace wheel bearings.

Wheel Bearing Tool Set
t Click picture for more information
Wheel

CT3872

Wheel Hub Bearing Unit Tool - VAG

VAG Wheel Hub Bearing Tool Set - 62mm
For combined wheel hub and bearing units.
Suitable for direct use on vehicle while in-situ.
Mounting shells and Dismantling shells
Mounting and Dismantling plates
Pressure plate with 8 holes

Wheel Hub Bearing Unit Tool
t Click picture for more information
Wheel

CT4275

Wheel Hub Bearing Unit Tool - VAG

VAG Wheel Hub Bearing Unit Tool - 66mm
For removing and installing the compact wheel bearing
combined wheel hub and bearing unit on VAG vehicles.
High strength ball bearing fitted spindle.
Applicable to VAG vehicles

Wheel Hub Bearing Unit Tool - 66mm
t Click picture for more information
Wheel

CT3582

Wheel Hub Bearing Unit Tool - VAG

VAG Compact Wheel Bearing Set
For removing and installing the compact wheel bearing
combined wheel hub and bearing unit on VW vehicles
with high strength spindle and components

Wheel Hub and Bearing Service Kit
t Click picture for more information
Wheel

CT3873

Wheel Hub Bearing Unit Tool - Ford / Mazda / Volvo

Front Wheel Hub Bearing Unit Tool - 78mm
on Ford | Mazda | Volvo
With Pressure plate and bolts
Disassembly shells and pressure piece
Mounting shells and pressure piece
High strength ball bearing spindle.

Wheel Hub Bearing Unit Tool - 78mm
t Click picture for more information
Wheel

CT3874

Wheel Hub Bearing Unit Tool - Ford / Volvo

Wheel Bearing Tool Set for Ford | Land Rover | Volvo
For GEN2 wheel bearings
Ford - Focus II.5RS | Focus 2.5RS 50
Ford - Mondeo MkIV from 2007
Galaxy from 2006 | S-Max from 2006 Front
Volvo S80 | V70 | XC60 | XC70 from 2006

Wheel Hub Bearing Unit Tool - 82mm
t Click picture for more information
Front

CT3763

Front Wheel Bearing Tools - 85mm

Compact Wheel Bearing Set for Audi / VW
For removing and installing the compact wheel bearing / combined wheel hub and bearing unit on VW Polo Fox etc.
High strength spindle and components suitable for direct use on vehicle while in-situ.

Front Wheel Bearing Tools - 85mm
t Click picture for more information
Wheel

CT4277

Wheel Hub Bearing Unit Tool Kit

Wheel Hub Bearing Unit Tool Kit
Consists of parts from 4 kits for
62 / 66 / 72 / 85mm VAG applications
CT3872 62mm Kit - Audi A2 | VW Lupo / Front
CT4275 66mm Kit - Skoda Fabia | VW Fox / Front | Polo
CT3582 72mm Kit - Audi A1 / A2 |
Seat Cordoba | Ibiza | Skoda Fabia | Roomster
VW Polo / Front | VW Fox with PAS / Front.
CT3763 85mm Kit - VW Multivan | Touareg | Transporter

Wheel Hub Bearing Unit Tool Kit
t Click picture for more information
Wheel

CT4276

Wheel Hub Bearing Unit Tool - 90mm

90mm Audi Wheel Hub Bearing Unit Tool
For assembling and disassembling front wheel hubs.
For use with workshop hydraulic press.
Suitable for Audi A4 | A6 | A8 | R8.
Pressure Plate and Push Pins.
Disassembly shells.
Disassembly pressure piece.
Mounting sleeve

Wheel Hub Bearing Unit Tool - 90mm
t Click picture for more information
Wheel

CT3952

Wheel Hub and Bearing Service Kit

Wheel Hub and Bearing Repair Kit
Wheel Bearing Hub Removal and Repair for
Rear Wheel Drive Mercedes / Porsche and BMW.
Front Wheel Drive VAG and Asian vehicles.
The Best Kit around for rear wheel hub
and bearing servicing on German vehicles.

Wheel Hub and Bearing Service Kit
t Click picture for more information
Wheel

CT5240

Wheel Hub and Bearing Service Kit

Wheel Hub and Bearing Service Kit
Designed to extract and install the drive flange and wheel bearing
on front and rear wheel drive vehicles where a one piece bearing is used.
Applicable to -
Rear wheel drive vehicles : BMW / Mercedes-Benz and Porsche.
Front wheel drive vehicles : Chrysler / Ford / Honda / Hyundai
Infiniti / Kia / Lexus / Mazda / Nissan / Toyota and VAG.
For use on drive axles only.

Wheel Hub and Bearing Service Kit
t Click picture for more information
Wheel

CT3513

Wheel Hub / Drive Shaft Puller

Wheel Hub and Drive Shaft Puller
4.3kg slide hammer for wheel hubs
and front-wheel drive shafts and brake drums
Suitable for most vehicles.
Bolt Size : M12 x 1.5 / M14 x 1.5

Wheel Hub Puller
t Click picture for more information
Hydraulic

CT3396

Wheel Hub Puller

Hydraulic Wheel Hub Puller
Hydraulic Ram with 10 Ton capacity
used to press the axle shaft from the hub.
For 4 or 5 bolt hubs with a 96 - 125mm diameter circle.
Applicable to most vehicles

Hydraulic Wheel Hub Puller
t Click picture for more information
Hydraulic

CT3776

Hydraulic Wheel Hub Puller

Universal Hub Puller Kit
with Hydraulic Ram
giving up to 12 Tons of pressure
with a large Slide Hammer assembly.
Suitable for almost all 3 | 4 | 5 and 6 holed hubs.
Ideal for use on a wide range of vehicles

Hydraulic Wheel Hub Puller
t Click picture for more information
Wheel

CT6367

Wheel Hub Puller

Wheel Hub Removal Tool
Designed to allow the easy removal of seized wheel hubs.
Covers most cars and LGV vehicles with 5 / 6 / 8 hub assemblies.
Apply the spindle to a solid point on the hub.
The spindle must put pressure on at least two solid points
on the hub to completely remove the hub.
Spindle must be lubricated before use.

Wheel Hub Puller
t Click picture for more information
Ford

CT3897

Wheel Hub Puller - Ford Transit

Rear Hub on FWD Ford Transit Puller.
The bearings on these Transits often seize in place
requiring this special tool for removal of the hub.
2000 Front wheel drive models only

Ford Transit Rear Wheel Hub Puller
t Click picture for more information
Ford

CT4863

Wheel Hub Puller - Ford Transit

Front Wheel Bearing Puller for Ford Transit 2006 onwards
Engineered for the safe in-situ removal of the drive flange
from the bearing / hub unit when replacing brake discs.
Allows the drive flange to be split from the hub assembly and then re-used.
Puller with retaining key
Pressure plates : large / small
Spindle with hexagonal drive
Screw set - 5pc

Ford Transit Front Wheel Hub Puller
t Click picture for more information
Universal

CT3619

Wheel Hub Puller - Universal

Universal Wheel Hub Puller
200mm puller screw with striking wrench.
Fits hubs up to 250mm diameter.
For most makes and models of cars or commercial vehicles.
Revolving end of legs ensure that no damage can be done to studs
axle or inner parts of the wheel.

Universal Wheel Hub Puller
t Click picture for more information
Wheel

CT0556

Wheel Hub / Ball Joint Puller Set

Hydraulic Wheel Hub Puller Set
and Ball Joint Removal Tool
Max : 10 Ton rated
Ram Length : 270mm x 38mm
Tommy bar length : 119mm
High density steel with knurled grip
Thread pitch of ram : 16 gauge x 3/8 BSW
Weight : 2kg

Wheel Hub / Ball Joint Puller Set
t Click picture for more information
10Ton

CT0566

Hydraulic Ram - 10 Ton

10 Ton Hydraulic Ram
Ball Joint Hub Bearing Puller Tool
Suitable for Cars and Vans.
Ram Length : 270mm
Width : 38mm
Tommy bar length : 119mm
Thread pitch of ram : M12 x 1.75
For use with CT0556 / CT3612 / CT3396

10Ton Hydraulic Ram / Forcing Screw
t Click picture for more information
Wheel

CT5435

Wheel Hub & Brake Drum Puller

Universal Hub / Brake Drum Puller
Suitable for removing 4-stud vehicle wheel hubs.
Bolt centres : 100 - 115mm
Overall width : 145mm
Depth : 38mm

Wheel Hub & Brake Drum Puller
t Click picture for more information
VW

CT4751

Hub Nut Socket - 74mm 3/4in.Dr

74mm Hub Nut Socket - 3/4in.Dr
for VW / GM and Mercedes Vans
Suitable for Volkswagen Crafter rear hub nuts
also fits Mercedes 511 twin rear wheel models
and GM Movano and Renault Vans.
S45C Steel

VW Crafter Hub Nut Socket
t Click picture for more information
Ford

CT4764

Rear Hub Nut Socket

Rear Hub Nut Socket - Ford Transit
1/2in.Dr Heavy duty 4 point specialised impact socket
for removing the rear hub nut on RWD Ford Transit vehicles 2014 -.
Alignment shaft allows accurate location onto castellated nut.

Ford Transit Rear Hub Nut Socket
t Click picture for more information
Wheel

CT3257

Wheel Bearing Socket Set - 1/2in

Socket Set - 7pc For Wheel Bearing Lock Nuts
Contains one of each 2-3/8in . 2-1/2in and 55mm Sockets
2-1/2in . 2-3/4in . 2-9/16in and 2-3/8in rounded lock nuts
1/2in Drive

Wheel Bearing Socket Set
t Click picture for more information
Grooved

CT5947

Grooved Locknut Socket Set - 9pc

9pc Groove Nut Socket Set - Outside Teeth
with 1/2in.Dr and 3/4in.Dr Sockets
For removing and installing DIN 981 Locknuts
Suitable for following grooved nut sizes :
1/2in.Dr : KM4 | KM5 | KM6 | KM7 | KM8
3/4in.Dr : KM9 | KM10 | KM11 | KM12

Grooved Locknut Socket Set
t Click picture for more information
Grooved

CT5949

Grooved Locknut Socket Set - 9pc

9pc Groove Nut Socket Set - Inside Teeth
with 1/2in.Dr and 3/4in.Dr Sockets
For removing and installing DIN 981 Locknuts
Suitable for following grooved nut sizes :
1/2in.Dr : KM4 | KM5 | KM6 | KM7 | KM8
3/4in.Dr : KM9 | KM10 | KM11 | KM12

Grooved Locknut Socket Set
t Click picture for more information
Grooved

CT4605

Grooved Locknut Socket Set - 13pc

13pc Special Socket Set
with Internal Teeth for Grooved Nuts
Sizes :18 | 22 | 25 | 28 | 32 | 38 | 45 | 52 | 58 | 65 | 70 | 75 | 80mm
For gently loosening and tightening groove nuts
60mm Long with 1/2in.Dr

Grooved Locknut Socket Set
t Click picture for more information
IVECO

CT5621

Axle Hub Nut Socket - 105mm IVECO

IVECO Axle Hub Nut Socket
Size : 105mm / 12 Point - across flats
Use with 36mm spanner | 6 Point drive
Applicable to IVECO Eurotech Cursor trucks.

IVECO Axle Hub Nut Socket
t Click picture for more information

Product Search

Search Icon
Section 1 Icon Section 2 Icon Section 3 Icon Section 4 Icon Section 5 Icon Section 6 Icon Section 7 Icon Section 8 Icon Section 9 Icon Section 10 Icon

Cannon Tools Limited   •  20 Station Road,  Rowley Regis,  West Midlands,  B65 0JU,  United Kingdom

 T +44 (0) 121 561 6760