Revised Products

Products which have revised specifications, or changed and up-dated in some way from original stock items

Porsche Cayenne Timing Tool Kit

CT3767

Timing Tool Kit - Porsche

VAG Timing Tool Set
for Porsche Cayenne and Panamera V8 Engines
Also Porsche Cayenne utilizing the M97/01 V8 engine.
For camshaft timing on Direct Fuel Injection /
Turbo and Normally-aspirated Engines
Allows TDC Timing during servicing the
Camshafts / Cylinder Head / Timing Chain
or Variable Valve-timing Cam Phasers.
Cayenne V8 up to 2007 and Cayenne and Panamera 2008 onwards

Porsche Cayenne Timing Tool Kit
t Click picture for more information
Volvo Cam/Crankshaft Alignment Tool Set

CT4868

Timing Tool Set - Volvo

Volvo Timing Tool Set
for B4204 8 Speed Transmission Engines.
For aligning the camshaft and crankshaft and
working on valve drive and renewing the cylinder head gasket.
Belt Pulley Counter Holding Tool
Crankshaft Wheel Puller
Radial Seal Ring Mounting Tool
Camshaft Sprocket Tool
Camshaft Alignment Tool

Volvo Cam/Crankshaft Alignment Tool Set
t Click picture for more information
Antifreeze Tester and Coolant Tester

CT0575

Antifreeze / Coolant Tester

Antifreeze and Coolant Tester
Easy read scale and pointers.
Calibrated in degrees C and F.
Tests ethylene glycol strength and includes temperature adjustment scale for accurate interpretation of mixture strength.
Tests Ethylene Glycol strength while the engine is hot or cold.
Composite body and rubber bulb for workshop durability.

Antifreeze Tester and Coolant Tester
t Click picture for more information
Tube and Trim Cutter

CT2772

Tube & Trim Cutter

Tube and Trim Cutter
With Multi-Angle Anvil and replaceable Utility Knife Blade.
Anvil Markings for 45 to 120 degree Angles.
Ideal for cutting Window Gaskets
Plastic Trim | Tubing and Conduit.

Tube and Trim Cutter
t Click picture for more information
Fluid Extractor

CT4642

Fluid Extractor and Refill Kit - 8L

8L Pneumatic Auto Transmission Fluid Extractor and Refill Kit
with 13 Adaptor Set for Audi / Ford / Mercedes / VW.
Extract / transfer and dispense fluid quickly and cleanly
With Pre-set Safety valve for automatic shut-off.
Pressure gauge to read and control pressure.
2 way control valve for dispensing more safely.
13 one touch adaptors for automotive fluid transfer.
Screw valve to switch from extractor to dispenser.
High flow control valve to extract fluid more efficiently.

Fluid Extractor
t Click picture for more information
Oil Filler Funnel and Adaptor Set

CT4950

Oil Funnel / Adaptor Set - 24pc

24 piece Engine Oil Filler Set with Rotation Handle
Allows for fast oil filling without spillage.
Great for many late model vehicles with internal baffles.
2 litre funnel fits adaptor for wide application range.
Colour coded plastic adaptors for oil filler access.
Special angle extension with swivel feature for hard to reach places.
Contains 19 specific adaptors for leakage-free connection.

Oil Filler Funnel and Adaptor Set
t Click picture for more information
16 Litre Oil Drain Pan

CT1589

Oil Drain Pan - 16 litre

16 litre Oil Drain Pan
Ideal for the Professional and Enthusiast Mechanic

16 Litre Oil Drain Pan
t Click picture for more information
Oil Sump Plug Key Set

CT4171

Oil Sump Plug Key Set - 12pc

12pc Oil Drain Plug Key Set
For use with 3/8in.Dr Ratchet
Hex keys : 8 | 9 | 10 | 12 | 14 | 17mm | 3/8in.
Square Keys : 8 | 11 | 13mm | 3/8in.
With 3/8in.Dr Sliding T-Bar.
Applicable to Oil Sumps on most modern vehicles

Oil Sump Plug Key Set
t Click picture for more information
Grease Gun

CT0583

Grease Gun - 15oz

15oz / 445cc Grease Gun
Die Cast Pump Head with Air Bleed
Can be used with Cartridge or Bulk Grease
Supplied with Rigid and Flexible Tubes

Grease Gun
t Click picture for more information
Micro Puller 19 - 45mm

CT5858

Micro Puller 19 - 45mm

Fast Fit Micro Puller 19 - 45mm
Supplied with thrust shaft extension
Capacity : 1 ton
Reach : 73mm
Puller Reach : 19 - 73mm / Min-Max
Puller Spread : 19- 45mm / Min-Max
Designed for the fast and safe removal of small bearings.
Also alternators / generators / domestic appliances / power tools and pumps.
Spring loaded and drop-forged legs are secured around the bearing or gear
by a screw collar to prevent slipping and subsequent damage or injury.

Micro Puller 19 - 45mm
t Click picture for more information
Adjustable Seal Puller

CT3915

Seal Puller

Adjustable Seal Puller
with 2 Hook Shapes
With rotating head for removing various oil and grease seals

Adjustable Seal Puller
t Click picture for more information
Ball Joint Socket Set

CT4231

Ball Joint Pin Socket Set - 11pc 1/2in.Dr

11pc Special Socket Set
for Castellated Lock Nuts
1/2in.Dr Sizes : 22 - 75mm
4 Tooth Sockets for removing castellated lock nuts
found on ball joints / axles and other applications.

Ball Joint Socket Set
t Click picture for more information
Suspension Turnbuckle Service Kit

CT0538

Suspension Turnbuckle Service Kit

Turnbuckle for Shock Absorber Top
Unique and comprehensive set of tools
for servicing spring or strut shock absorbers.
Suitable for a wide variety of vehicles
in conjunction with spring compressors.
Chrome Vanadium sockets and
Strut Nuts with 22mm hex drive.
Specialist bits with 10mm hex drive
Go-Thru Ratchet : 19 | 22mm.

Suspension Turnbuckle Service Kit
t Click picture for more information
Brake Bleed Wrench Set

CT4759

Brake Fluid Bleed Wrench Set - 6pc

6pc Brake Bleed Wrench Set
Sizes : 7 | 8 | 9 | 10 | 11 | 12mm - 12 point
Combined Wrench / Socket and Nipple Connector.
Ideal for bleeding brake and hydraulic clutch systems without removing the wheels.
1.2M silicon hose with check valve for safety operating.
For universal bleeder nipples.

Brake Bleed Wrench Set
t Click picture for more information
Brake Pressure Bleeder Kit

CT3414

Pneumatic Pressure Bleeder Kit

Pneumatic Brake Pressure Bleed Kit
Low pressure tank 10 - 40psi which can be pre-charged
with compressed air - making the unit fully portable.
Suitable for use on ABS systems.
Supplied with a range of vehicle adaptors.

Brake Pressure Bleeder Kit
t Click picture for more information
Brake Piston Wind Back Set

CT1868

Brake Piston Wind Back Set - 16pc

Disc Brake Calliper Piston Rewind Set
Air Powered Wind Back Tool 80-100psi
Compatible with 3/8in.Dr tools
Right and Left hand Operation
Converter for 2 pin Adaptors
15 Wind Back Keys

Brake Piston Wind Back Set
t Click picture for more information
Universal Press and Pull Sleeve Kit

CT2934

Press and Pull Sleeve Set

Universal Press and Pull Sleeve Kit
Press Sleeves from 34 - 80mm Diameter in 2mm steps
Outside Diameter from 44 - 90mm in 2mm steps
5 x Pulling Spindles with nuts and thrust bearings
M10 | M12 | M14 M16 | M18

Universal Press and Pull Sleeve Kit
t Click picture for more information
Bearing Service Kit

CT2289

Bearing Service Kit - 19pc

19pc Front Wheel Drive Bearing Service Kit
For the removal and installation of front hub bearings
without the need to dismantle the steering assembly.
Heavy Duty Steel Drifts : 55.5. to. 91mm

Bearing Service Kit
t Click picture for more information
Wheel Lock Key Set - Vauxhall / Opel

CT4767

Wheel Locking Nut Key Set - 21pc Vauxhall / Opel

21pc Wheel Locking Nut Key Set
For removing Vauxhall / Opel locking wheel nuts on -
Agila | Astra F/G/H | Calibra | Corsa B/C/D |
Meriva | Omega B | Signum | Speedster |
Tigra A/B | Vectra B/C | Zafira A/B.
Vauxhall Wheel Lock Nut Keys equivalent to
OEM Z16512-181 to Z16512-200
With 17mm Alloy Wheel Nut Socket.

Wheel Lock Key Set - Vauxhall / Opel
t Click picture for more information
Wheel Lock Key Set - Land Rover

CT4768

Wheel Locking Nut Key Set - 10pc Land Rover

10pc Land Rover Wheel Locking Nut Key Set
Master Set of Tamper Proof Sockets
for removing the locking wheel nuts on Land Rover vehicles.
Hex Drive - Identified with : A | B | C | D | E | F | G | H | I | J.
Use with a 27mm Spanner or Socket
NOT for use with Impact Tools.

Wheel Lock Key Set - Land Rover
t Click picture for more information
Wheel Lock Key Set - Tesla

CT5890

Wheel Locking Nut Key Set - 5pc Tesla

5pc Tesla Wheel Locking Nut Key Set
Applicable to Tesla Models : 3 / S / X
Identified as : A / B / C / D / E
For use with a 21mm Alloy Wheel Nut Socket or Spanner
Chrome Vanadium

Wheel Lock Key Set - Tesla
t Click picture for more information
4 Way Wheel Brace

CT0342

Wheel Brace

4 Way Cross Wheel Brace
Sizes : 17 | 19 | 21 | 23mm
with Dipped Covered Shaft

4 Way Wheel Brace
t Click picture for more information
Extending Wheel Wrench

CT0539

Wheel Wrench - 21in.

21in. Extending Wheel Wrench
1/2in.Dr Socket : 17mm | 19mm
Extends from 340mm to 510mm
For use on vehicle Wheel Nuts

Extending Wheel Wrench
t Click picture for more information
Air Tool Kit

CT0870

Air Tool Kit - 13pc

13pc Air Tool Kit / Ratchet Impact Gun and Sockets
1/2in.Dr Impact Wrench
3/8in.Dr Ratchet
Sockets : 9 | 10 | 11 | 13 | 14 | 17 | 19mm
3/8 to 1/2in. Adaptor
Mini Oiler Hex Key and Nipple

Air Tool Kit
t Click picture for more information
Portable Soda Blasting Gun

CT5263

Portable Soda Blasting Gun

Soda Blasting Gun
Capacity : 1000ml
Operating Pressure : 6.3 - 8.2 bar
Air consumption : 57L/min
Air Inlet : 1/4in.bsp
Suitable for automotive use in removing
paint / mould / carbon / grease and rust.
Use with environmentally friendly soda blasting agents.
Particularly useful where less aggressive cleaning is required

Portable Soda Blasting Gun
t Click picture for more information
5 Piece Air Tool Kit

CT0778

Spray Gun Kit - 5pc

5pc Spray Gun / Air Tool Kit
Includes High Pressure Spray Gun
Tyre Inflator with Gauge
Fluid Gun with Control Nozzle
Air Dust Gun
5M Recoil Air Hose 1/4in. BSP

5 Piece Air Tool Kit
t Click picture for more information
Paint Spray Gun Kit

CT2738

Spray Gun Kit - 7pc

7pc Spray Gun Kit
HVLP Spray Gun
Mini Spray Gun
Mini Regulator
150 and 600ml containers
Nozzles - 1.0 / 1.4mm
Pressure - 35 - 43psi
Air Inlet - 1/4in. BSP

Paint Spray Gun Kit
t Click picture for more information
Tyre Lever Set : 12 inch

CT0663

Tyre Lever Set - 2pc

2pc Tyre Lever Set
Both 12in. / 300mm

Tyre Lever Set : 12 inch
t Click picture for more information
Tyre Lever

CT2197

Tyre Lever - 12in.

12in. / 300mm Tyre Lever

Tyre Lever
t Click picture for more information
Tyre Lever

CT2198

Tyre Lever - 20in.

20in. / 500mm Tyre Lever

Tyre Lever
t Click picture for more information
Tyre Lever

CT2199

Tyre Lever - 24in.

24in. / 600mm Tyre Lever

Tyre Lever
t Click picture for more information
Tesla Jack Pad Block

CT5583

Jack Pad Adaptors - Tesla

4pc Tesla Jack Pad Adaptor Set
Size : 75 x 50mm
Suitable for Tesla - 3 / Y / S / X model vehicles.
Simply insert the protection pad into the jack hole on the vehicle.
Avoids damaging the battery and the side skirt.

Tesla Jack Pad Block
t Click picture for more information
Bottle Jack - 2 Ton

CT1720

Bottle Jack - 2 Ton

2 Ton Hydraulic Bottle Jack
Min. Height : 168mm
Max. Height : 316mm

Bottle Jack - 2 Ton
t Click picture for more information
Bottle Jack - 20 Ton

CT0011

Bottle Jack - 20 Ton

20 Ton Hydraulic Bottle Jack
Min. Height : 235mm
Max. Height : 445mm

Bottle Jack - 20 Ton
t Click picture for more information
Bottle Jack - 20 Ton Pneumatic

CT0970

Bottle Jack - 20 Ton Pneumatic

20 Ton Air Hydraulic Bottle Jack
Min. Height : 260mm
Max. Height : 510mm
Ram Travel : 170mm
Height Adjustment : 80mm
Air pressure : 20 - 180psi

Bottle Jack - 20 Ton Pneumatic
t Click picture for more information
Electric Winch

CT0711

Electric Winch - 2000lb

12V Electric Winch
Rated Voltage : 12V DC
Motor : 1.7kw / 2.3hp
Capacity : 2000lbs / 907kg
Cable length : 15m
Cable diameter : 4mm
Reversible
Ideal for Horizontal Winching - Boats / Tree Stumps and Vehicles
Please be advised that the Winch Rollers shown on the box are NOT Included.

Electric Winch
t Click picture for more information
Electric Winch

CT0712

Electric Winch - 2000lb

2000lb Electric Winch
Power Supply : 12V DC
Rolling Capacity : 6000lb
Pulling Capacity : 2000lb
Cable Length : 30ft / 9.1M
Maximum Boat Weight : 5000lb
Line Speed with load : 6ft /1.8M p/min
Weather resistant high-impact housing with folding handle.
Mounts securely to your trailer to provide pulling power
for boats / vehicles and other loading jobs.

Electric Winch
t Click picture for more information
Rigid Steel Tow Bar

CT1558

Tow Pole

Vehicle Tow Pole
Length : 1800mm
Maximum Load : 2000Kg
Rigid zinc plated steel tow bar for cars and Light Vans
Conforms to TUV / GS standards.
Suitable for accidents and emergency purposes.

Rigid Steel Tow Bar
t Click picture for more information
Tool Box with Handle

CT1475

Tool Box

20in.Portable Steel Tool Box with 4 Drawers
All-steel construction and built to last.
Ball-bearing drawer slides allow for ease of use.
Cantilever tray under the lid helps organize small parts.
Supplied with 2 keys.
Dimensions : 520 x 220 x 370mm
4 Drawers : 445 x 190 x 57mm / each size.
Cantilever Tray : 95 x 185mm

Tool Box with Handle
t Click picture for more information
Inverter / Welding Machine

CT2230

Welding Machine - 200A

Inverter MMA Portable Welding Machine
Voltage : 230V
Frequency : 50Hz
Rated Input : 8.2KVA
No-load Voltage : 65V
Current Range : 10 - 200A
Usable Electrode Diameter : 1.6 - 5.0mm
Rated Duty Cycle : 60 percent at 200A
Protection Class : IP21

Inverter / Welding Machine
t Click picture for more information
Nut Rivet Drill Adapter Kit M3-M10

CT5521

Nut Rivet Drill Adapter Kit

Nut Rivet Drill Adapter Kit
CNC machined Aluminium Adapter with CRM mandrels.
Convert a cordless or corded drill into a power nut riveter.
Note : Drills must feature torque limiting clutch.
Includes 7 mandrels and nosepieces -
Metric : M3 | M4 | M5 | M6 | M6 | M8 | M10.
Hex Shank Size : 1/4in.

Nut Rivet Drill Adapter Kit M3-M10
t Click picture for more information
Panel Beating Hammer / Dolly Kit

CT2097

Panel Beating Kit - 9pc

9pc Panel Beating Kit / Auto Body Repair Set
Drop-forged Steel Dollies and Spoons.
4 Hammers : Bumping | Skinning | Pein & Pick / Finish
with Professional Hickory Handles.
3 Dollies : Toe | Universal | Heel.
2 Spoons : Dinging | Surfacing.
Use on flat and curved surfaces.
Hammer Heads and Dollies made from 1055 medium carbon steel
Natural Hickory Wood Shafts

Panel Beating Hammer / Dolly Kit
t Click picture for more information
Hydraulic Shop Press

CT2594

Hydraulic Press - 50 Ton

50 Ton Hydraulic Shop Press
Floor Standing Heavy Duty H-Frame Construction
Capacity : 50 Tons
Working Range : 0 - 1000mm
Ram Stroke : 185mm
Air Pressure : 110 - 120psi
Air Inlet : 1/4in. NPT
Ideal for straightening / Bending and Stamping.

Hydraulic Shop Press
t Click picture for more information
10kg Anvil

CT2734

Anvil - 10kg

10kg Anvil

10kg Anvil
t Click picture for more information
20kg Anvil

CT2735

Anvil - 20kg

20kg Anvil

20kg Anvil
t Click picture for more information
50kg Anvil

CT2736

Anvil - 50kg

50kg Anvil

50kg Anvil
t Click picture for more information
100kg Anvil

CT2574

Anvil - 100kg

100kg Anvil

100kg Anvil
t Click picture for more information
Wrecking Bar / Nail Puller

CT0024

Pry Bar Set - 3pc

3pc Pry Bar Set
Sizes : 12 | 17 | 24in. / 300 | 430 | 600mm
Solid Plastic Handles with Hammer Cap
Drop forged and heat treated steel shafts for strength

Wrecking Bar / Nail Puller
t Click picture for more information
Pry Bar Set with Roll Head Bar

CT0239

Pry Bar Set - 5pc

5pc Pry Bar Set with Hi-Vis Handles
Set includes Roll Head Bar
4 Pry Bars :
6 x 200mm | 9 x 300mm | 11 x 460mm | 12 x 600mm.
Sizes : 8 / 12 / 16 / 18 / 24in.

Pry Bar Set with Roll Head Bar
t Click picture for more information
Stud Extractor Set

CT2241

Bolt Extractor Set - 5pc

5pc Go Through Stud Extractor Set
Sizes : 6 | 8 | 10 | 12mm
with 19 / 21mm Ratchet Spanner

Stud Extractor Set
t Click picture for more information

Product Search

Search Icon
Section 1 Icon Section 2 Icon Section 3 Icon Section 4 Icon Section 5 Icon Section 6 Icon Section 7 Icon Section 8 Icon Section 9 Icon Section 10 Icon

Cannon Tools Limited   •  20 Station Road,  Rowley Regis,  West Midlands,  B65 0JU,  United Kingdom

 T +44 (0) 121 561 6760