Products which have revised specifications, or changed and up-dated in some way from original stock items
Ball Joint / Tie Rod Separator Set
5pc Ball Joint and Tie Rod Separator Set
For separating most pitman arms / tie rods and ball joints
Found on a automotive and light truck vehicles.
With separators for late model Ford and GM pickups.
Sizes : 11/16in | 15/16in. | 1-1/8in. | 1-7/16in. | 1-5/8in.
Sizes : 19mm | 24mm | 30mm | 37mm | 42mm
Bearing and Bushing Driver Set - 17pc
17pc Bearing and Bushing Driver Set
For Bearings / Vibration Isolators / Silent Blocks
3 Driver Handles : 113mm | 140mm | 162mm
14 adaptors : ID 10 - 38mm | OD 12 - 42mm
Allows the user to insert wheel bearing race and seals
easily without damaging the race and axle housing.
Fits most standard bushing / wheel bearings.
Simply turn discs over to drive seals.
Brake & Clutch Pressure Test Kit
Brake and Clutch Master Cylinder Pressure Test Kit
Adaptors install directly into master cylinder access holes
Measures pressure at front or back of master cylinder
Pressure gauge 0 - 300 psi and is accurate to 4% of scale
JIC quick disconnect for easy connection
Brake Fluid Bleed System
Brake or Clutch Bleeding System
Suitable for use with ABS systems.
One-man bleeding system requiring no external power source.
2.5 litre tank allows flushing the entire system
with one fill without the risk of running the reservoir dry.
42mm diameter cap suitable for most European vehicles.
Working Pressure : 2 Bar / 30psi
Max. Pressure : 5 Bar / 70psi
NOW with 1 litre Suction Tank.
Wheel Nut Removal Set - 11pc
11pc Wheel Locking Socket Removal Tool Set
For the removal of most wheels without damage
8 x 60mm conical sockets -
Outer diameter : 18.3 to 24.5mm
Inner diameter : 16.4 to 22.6mm
with 2 Dismantling Mandrels and Air Hammer Attachment.
For use with a Copper Mallet or Air Hammer.
Wheel Stud Thread Repair Set - 13pc
13pc Tap and Die Set
For re-threading wheel studs / nuts and bolts.
Special holders allow for use with built-in wheel studs
Tap / Die Sizes : M12 x 1.25 | M12 x 1.50 | M14 x 1.50
with Tap Holders / Die Stocks / L-type Hex wrench and Thread gauge
0.5 | 0.6 | 0.7 | 0.75 | 0.8 | 0.9 | 1.0 | 1.25 | 1.5 | 1.75 | NPT27 | BSP28
Air Compressor - Portable
Portable Air Compressor
with Tyre Inflation Gauge and Attachments
Voltage : 230V / 50Hz
Rated output power : 1100W
Operating mode type : S3 15 percent
Compressor speed : 3550rpm
Theoretical suction power : 180 L/min
Max. working pressure : 8 bar
Protection class : II / IP20
Air Regulator with Filter and Lubricator
Air Regulator / Filter and Lubricator
Heavy Duty unit for most workshop air lines.
Die-cast control heads and Clear polycarbonate bowls.
Large easy-to-read pressure gauge.
Filter fitted with automatic drain tap.
Supplied with Male to Female adaptors
Integral wall bracket.
Port Size : 1/2in. BSP
Storage Rack with Plastic Bins
Single Sided Bin Storage Rack
Overall dimensions: 45 x 37 x 11in.
Holds 32 Small Red Bins : 5-1/2 x 3-1/4in.
and 15 Large Blue Bins : 8-1/4 x 5in.
Convenient storage option with easy access.
Plastic bins are removable for convenience and ease.
For garages and workshops - helps keep work areas free of clutter.
Generator - Petrol 6.5hp
6.5HP Petrol Generator
4-stroke single cylinder air cooled engine with
Electric Ignition or Recoil Start and Oil Alert System
Rated Voltage : 115V / 230V
Frequency : 50Hz
Rated Output : 2.0KW - approx
Max. Output : 2.2KW - S2.2min
Engine : 196cc / 6.5HP
Fuel Capacity : 13L