3pc Impact Extension Bar Set
1in. Drive
100mm | 150mm | 250mm / 4in. | 6in. | 10in. Long

3pc Ratchet Set : 1/4 | 3/8 | 1/2in.Dr
85 | 100 | 140mm Long
72 Tooth Mechanism with Quick Release Button

3pc Ratchet Set : 1/4 | 3/8 | 1/2in.Dr
72 Tooth Mechanism with Quick Release Button
Polypropylene Handles

17pc Multi-Fit Socket Set with Go Thru Ratchet
Sockets Sizes : 10 | 11 | 12 | 13 | 14 | 16 | 17 | 18 | 19 | 21 | 22 | 24mm
Extension : 75mm Long
3/8in.Dr Adaptor
1/2in.Dr Adaptor
Multi-Fit sockets will drive Metric and SAE nuts plus Star type fixings
Chrome Vanadium

8pc Impact Adaptor Set
1/4 F x 3/8 M
3/8 F x 1/4 M
3/8 F x 1/2 M
1/2 F x 3/8 M
1/2 F x 3/4 M
3/4 F x 1/2 M
3/4 F x 1 M
1 F x 3/4 M
Chrome Vanadium

94pc Socket Set - 1/4 and 1/2in.Dr
Sockets : 4mm -32mm
Deep Sockets : 6mm - 19mm
Spark Plug Sockets : 16 / 21mm
1/4 and 1/2in.Dr Ratchets
Extension and Sliding T-Bars
Flexi-Shaft Extension
Universal Joint and Bit Adaptors
Screwdriver Bits with Driver Handle

121pc Socket / Tool Set
1/4 | 3/8 | 1/2in.Dr Ratchets with
Sockets : 4 to 13 | 9 to 19mm | 20 to 32mm
E Sockets : E8 to E20 | Spanners : 8 to 19mm
Extension bars | Universal joints and Drive Adaptors
Bits | Bit Adaptor and Hex Keys : 1.5 to 10mm
Screwdrivers and Oil filter wrench

171pc Socket and Bit Set - 1/4 | 3/8 and 1/2in.Dr
1/4in.Dr : 4 - 14mm | 6 - 10mm Deep | E4 - E8 Star
3/8in.Dr : 10 - 19mm | 10 - 15mm Deep | E10 - E18 Star
1/2in.Dr : 10 - 32mm | 16 - 22mm Deep | E20 . E24 Star
Screwdriver Bits : Flat | Hex | Phillips | Pozidriv | Star

3/8in.Dr Torque Wrench
Torque Range : 5 - 80 ft/lbs
45 Teeth with Reversible Ratchet Head

1/2in.Dr Torque Wrench
Torque Range : 28 - 210Nm
45 Teeth with Reversible Ratchet Head

Digital Display Torque Wrench
10 - 200Nm with 10 Digital Presets.
530mm Long - 1/2in. Drive with 72 Teeth mechanism.
Units : Nm / ft-lb / in-lb / kg-m with 2 percent accuracy.
Auto shut off : 150 seconds with Audible alert mode.
Requires 3 x AAA Batteries / not included.
Ideal for industrial / automotive use.

Digital Display Torque Wrench
17 - 340Nm with 10 Digital Presets.
650mm Long - 1/2in. Drive with 72 Teeth mechanism.
Units : Nm / ft-lb / in-lb / kg-m with 2 percent accuracy.
Auto shut off : 150 seconds with Audible alert mode.
Requires 3 x AAA Batteries / not included.
Ideal for industrial / automotive use.

8pc Combination Spanner Set
SAE Sizes : 3/8 | 7/16 | 1/2 | 9/16 | 5/8 | 11/16 | 3/4 | 7/8in.
Supplied in a wallet

11pc Combination Spanner Set
Sizes : 6 | 7 | 8 | 9 | 10 | 11 | 13 | 14 | 15 | 17 | 19mm
Drop Forged

12pc Combination Spanner Set
SAE Sizes : 1/4in. - 7/8in.
Supplied in plastic Rack

12pc Combination Spanner Set
SAE Sizes : 1/4in. - 7/8in.
Supplied in a wallet

25pc Combination Spanner Set
Sizes : 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 |
19 | 20 | 21 | 22 | 23 | 24 | 25 | 26 | 27 | 28 | 30 | 32mm
Recessed Pattern / Polished Head

10pc Flexi-Head Ratchet Spanner Set
Dual Sizes : 8 to 19mm
Drive Adaptors : 1/4 | 3/8 | 1/2in.
72 Tooth ratchet mechanism
5 degrees of movement to engage
Swivel Head ideal for awkward places
with Screwdriver Bit Adaptor

6pc Swivel Head Socket Wrench Set
with Dual heads
Sizes : 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19mm
Chrome Vanadium

3pc Pipe Wrench Set
Sizes : 10 | 12 | 18in. / 250 | 300 | 460mm
Heavy Duty with Soft Grip Handles

7in. / 195mm Wire Cable Cutter
For cutting up to 3mm diameter Wire
With Heavy Duty Spring and Blade Lock

Crimping Pliers - 6pc Set
with 5 Pairs of Pressing Jaws.
For Insulated and Non-Insulated Terminals.
Also Open Barrel Terminals and Insulated Cord End Terminals.
AWG 22-18 / 16-14 / 12-10 | DIN 0.5-1.0 / 1.5-2.5 / 4-6mmSQ
AW 20-16 / 16-14 / 12-10 / 8 | DIN 0.5-1.5 / 1.5-2.5 / 4.0-6.0 / 10mmSQ
AWG 20-18 / 16-14 / 12-10 | DIN 0.5-1.0 / 1.5-2.5 / 4-6mmSQ
AWG 22 / 20 / 18 / 16 / 14 / 12 | DIN 0.5 / 0.75 / 1.0 / 1.5 / 2.5 / 4.0mmSQ
AWG 10 / 8 / 6 | DIN 6 / 10 / 16mmSQ

Hydraulic Crimping Tool Set
Max. Pressure : 16Ton
Max. Stroke : 24mm
Hexagon Dies : 16 to 400mm
Ideal for contact type copper and lead terminals
and connecting union pipes
used in electric cable conductors.

10in. / 250mm Water Pump Pliers
Slip-Joint Pliers with PVC dipped handles.
Budget Model

3pc Mini Grip Wrench Set
Curved Jaw : 106mm / 23mm Jaw
Long Nose : 124mm / 37mm Jaw
C-Clamp : 128mm / 30mm Jaw

2pc Circlip / Snap Ring Pliers Set
165mm Internal and External Pliers
with Straight and 45 / 90 degree Tips
Sizes : 0.8mm | 1.2mm | 1.4mm | 2.0mm

10pc Circlip / Snap Ring Pliers Set
Straight Tips : 0.038 | 0.047 | 0.070 | 0.090
Bent Tips - 0.038 | 0.047 | 0.070 | 0.090
5in. Hook Tool
5in. Pick Tool

Extra Long Circlip / Snap Ring Pliers - 10in. 2pc Set
includes 16 Replacement tips.
Offset tips make it easier to install and remove circlips.
Removable and replaceable tips
with spring ratchet locking mechanism
to hold circlips securely against tension.

4pc Circlip / Snap Ring Pliers Set
13in. / 325mm with Straight and 90 degree Tips
Supplied with fabric case.

Ratchet Hose Clip Pliers
Jaw Range 22 - 55mm
For flat-type hose Clamps in hidden and hard to reach areas.
Fits most ring-type or flat-band hose Clamps.
The Clamps are held open with a ratchet locking mechanism.

7pc Hose Clip Pliers Set
Hose Clip Pliers
Swivel Jaw Spring Wire Clip Pliers
Swivel Jaw Spring Band Clip Pliers
Flat Band Clip Pliers
Angled Flat Band Clip Pliers
Hose Remover Pliers
Clic-R Collar Pliers

220mm Automotive Relay Pliers
To release and refit vehicle electrical relays.
With thin tips and offset handles
for easier access than traditional pliers.
Forged metal handles and PVC dipped grips.
Essential for vehicle technicians and mechanics.

Exhaust Hanger Pliers
for removing the Rubber Grommets from exhaust mounts
Fits a wide range of vehicles and models
Saves time and energy.
Long rubber dipped handles to avoid hot exhausts.

Digital Battery Tester
125A battery load tester for 12V DC lead acid batteries
Battery condition LEDs give a very clear indication of the test results

Heavy-Duty Smart Trolley Battery Charger & Starter
LCD Display for easy reading with Slow and Fast Charge modes.
Input : 220V - 240V AC | 50 - 60Hz | 13A
Output : 12V DC - 10A /30A / 60A
Output : 24V DC - 5A /15A / 30A
Engine-cranking : 12V DC / 200A / 5s on / 180s off
Protected against Overcharge / Short Circuit and Reverse Polarity.
Supplied with Smart Clamp Leads.
Suitable battery types : STD | AGM | GEL | LifeP04

2pc Automotive Battery Terminal Cleaner Set
Fits all terminal posts
Wire Brush for removing corrosion build-up
on battery posts and Terminals for improved electrical contacts.

Electronic Stethoscope Kit
Detect and identify noisy components
Super sensitive microphone with cushioned headphones
4 Pick-up sensors with 4.8 metre long cord

Digital Multimeter
LCD Display with Max. reading : 1999
Overload protection
Low battery indication
Measurement Functions : AC Voltage
DC Current | DC Voltage | Resistance and Diode.
Ideal for use in the Home / Laboratory or Workshop.

Automotive Clamp Meter
Digital LCD Screen Max. reading : 1999
Overload Protection | Auto Ranging | Zeroing Function
Max. Measurable Conductor : 25mm diameter
Voltage AC / DC : 600V
Current AC : 20 / 200 / 600A
Resistance : 2k Ohms
Continuity : Yes
2 x 3V CR2032 Batteries

30pc Alternator Service Kit
1/2in.Dr - 10mm Hex Shank Adaptor.
1/2 | 3/8in.Dr Star / Spline and Hex Bits to fit most alternators.
Ideal for BOSCH alternators with free wheel pulleys.

11pc Electronic Fuel Injection Test Light Set
Crucial for electronic fuel injection systems
Systems covered :
TBI - Ford | GM | Geo
PFI - Bosch | GM
SCPI - GM / Multec 2 / 1987
GM 1982 equipped vehicles.

8pc Common Rail Diesel Injector Repair Kit
For repairing common rail diesel injectors Bosch / Siemens and Denso.
Set comes with all necessary sockets to open up defective injectors :
Injector ball valve lapping tools
Hex Bits : 6.6mm | 7.6mm
Denso common rail injector valve seat removal tool
8 Sided socket for Bosch common rail injectors
Inside fixing removal tool for Siemens common rail injectors.

Engine Compression Test Kit
Compression pressure testing up to 50 bar.
Suitable for most petrol and modern HDI / TDCI
pump injector and older diesel engines.
Quick couplings for straight or angled versions.
Glow plug adaptors | Spark plug adaptors M10 / M12 / M14 and M18.
Injector adaptors M20 / M22 / M24 and stanadyne injectors
Additional pressure gauge for pressure drop test.
Suitable for most cars / trucks / buses / agricultural and marine engines.

Petrol Engine Compression Test Set
Thread Chasers : M10 | M12 | M14 | M18
with Dual Scale Gauge for direct and indirect injection engines.
For use on engines with deep seated plug ports with difficult access.
Built-in pressure relief valve enables repeat tests without dismantling.

Automatic Wave Box Pressure Meter
Diagnose problems with oil pressure in virtually all diesel and petrol engines.
Dual scale gauge : 0 - 500psi / 0 - 35bar
Hose : 1800mm 1/8 NPT oil proof.
Includes 1/4 and 3/8 NPT Adaptors.

46pc Harmonic Balance Puller Set
Removes Harmonic Balancers / Gear Pulleys
Steering Wheels and Crank Shaft Pulleys
Zinc Plated Yoke and Bolts
5in. Pressure Screw
Small Cantering Adaptor
Large Cantering Adaptor
Flat Shaft Adaptor

BMW Single VANOS Camshaft Timing Kit
For setting engine timing during chain removal and installation.
Compatible with some BMW 4 and 6 cylinder none VANOS engines
With Camshaft Locking Plate
VANOS Turning Wrench
and Top Dead Centre Pin

BMW Timing Tool Set
For engine codes : N51 | N52 | N53 | N54
With Camshaft and Crankshaft Locking Tools
Transmitter Wheel Locking Tool.
Suitable for a wide range of models.

BMW Timing Tool Set
for N63 / N74 / S63 Models
N63 engines up to September 2012.
N74 V12 Engines which are not very common.
S63 engines prior to September 2011.

BMW / Mini Timing Tool Set
for BMW / Mini One 2001-06
Mini Cooper 2001 - 06 and Mini Cooper S 2002 - 06
Set contains Camshaft Sprocket Holding Tool
Engine Support Bracket and Tension Assembly Tool
This kit is specifically designed for petrol engines on pre 2009 Mini One / Cooper and Cooper S models.
Engine Codes : W10 | W11 | N14