62mm Ball Joint Remover
3/4in.Dr for Cars / Light Trucks and SUVs
Opening on the support fork : 62mm
Opening on the puller housing : 100mm
Max. pressure range : 118mm br> Drive : 20mm br> Suitable for impact wrenches.

14pc Master Set Ball Joint Adaptor Kit
For use on all cars and light trucks that have press-fit type ball joints
Installation and Removal Adaptors
Installation and Removal Cups
Receiving Tubes
For use with C-Frame Press / NOT included

Mercedes Ball Joint and Bushings Separator
Removes the upper and lower ball joints on Mercedes Benz vehicles
185mm compression spindle with 24mm Hex Drive
40 and 54mm Compression heads
22 / 33 and 57mm Pressure pads
Works on press-fit upper and lower ball joints.
C- Frame can be used to remove and install universal joints.

Mercedes Ball Joint Separator
Removes the upper and lower ball joints on Mercedes Benz models vehicles.
160mm compression spindle with 24mm Hex Drive
Works on press-fit upper and lower ball joints.
C- Frame will remove and install universal joints.

10pc Ball Joint Separator Tool Kit
Ball Joint Installation and Removal kit for
Mercedes Benz ML3650 | S500 | E320 | E500
With forged carbon steel C-frame Press.
Front and Rear suspension ball joint press adaptors
and 3/4in.Dr 4 prong Ball joint socket

21pc Master Adaptor Set Ball Joint Service Kit
For use on all cars and light trucks that have press-fit type ball joints
C-Frame | Forcing Screw | Installation Adaptor | Removal Adaptor
Installation and Removal Cups
Receiving Tubes

9pc Ball Joint Service Kit with 4 Wheel Drive Adaptors
For use on all cars and light trucks that have press-fit type ball joints
C-Frame | Forcing Screw | Installation Adaptor | Removal Adaptor
Installation and Removal Cups
Receiving Tubes

Large C-Frame Ball Joint Separator
For cars and light trucks with press-fit type ball joints.
Separates tie rod ends and compact car ball joints.
Powerful lever action breaks loose stubborn joints.
Eliminates broken grease reservoirs.
No need for excessive hammering.

Ball Joint Socket for Renault
1/2in. Drive 40mm / 45mm Deep
4 Round Pins with 7.75mm diameter.
Designed to remove the screw in type lower joint from the bottom arm.
Applicable to Renault Twingo II Sport 133 / 2007-2014.

43mm / 12pt Ball Joint Socket - Mercedes Benz
For loosening and tightening the supporting joint flat nut.
The socket allows the supporting joint pin to be held in place
when the nut is loosened or tightened.
The socket engages frictionally in the nut profile.
Hex Drive : 30mm
Square Drive : 1/2in.
Size : 43mm / tip to tip

Mercedes M-Class Ball Joint Pin Socket
3/4in.Dr / 4 Pin
For ML-class W163 < 2005 and W164 2005 <
For servicing the front and rear axle suspension ball joints.
Loosen and tighten counter nuts on suspension joints with correct torque.

2pc Lower Ball Joint Pin Socket Set
for Castellated Lock Nuts with
51mm and 60mm Outer Diameters
Use with a 35 and 38mm Socket or Spanner
Applicable to :
Peugeot ; 405 | 406 | 407 | 605 | 607
Citroen : Xantia - C5 | C6
Suitable for removal of OEM
and after market lower ball joints.

11pc Special Socket Set
for Castellated Lock Nuts
1/2in.Dr Sizes : 22 - 75mm
4 Tooth Sockets for removing castellated lock nuts
found on ball joints / axles and other applications.

17pc Bearing and Bushing Driver Set
For Bearings / Vibration Isolators / Silent Blocks
3 Driver Handles : 113mm | 140mm | 162mm
14 adaptors : ID 10 - 38mm | OD 12 - 42mm
Allows the user to insert wheel bearing race and seals
easily without damaging the race and axle housing.
Fits most standard bushing / wheel bearings.
Simply turn discs over to drive seals.

BMW Differential Front Bushing Tool Set
For the removal / installation of the front differential bushing
on BMW 5 / 6 / 7 series vehicles -
F01 | F02 | F04 | F06 | F07 | F10 | F11 | F12 | F13 | F18
With Disassembly Plates and Sleeve

BMW Differential Rear Bushing Tool Set
For servicing the rear differential rubber bushing in the rear axle carrier.
Applicable to : BMW 5 | 6 | 7 series -
F01 | F02 | F04 | F06 | F07 | F10 | F11 | F12 | F13 | F18
OEM Code : 330 030

BMW Transmission Rubber Mount Extractor Set
For X3 / X5 / X6 transmission rubber bushings.
BMW : E53 | E60 | E61 | E67
E70 | E71 | E83
E90 | E91 | E92
X-Drive models.
Covering : 2000 - 2013

BMW Bushing Service Kit
For removing and installing the Screw Pivot Bushing Isolator.
Applicable to BMW E31 / E32 / E34 / E38 / E39 / E53 / E60 / E65 / E66

BMW Rear Axle Bushings Service Kit
For the Removal and Replacement
of Rear Axle Bushings / Metallic Vibration Isolators.
Applicable to : BMW E38 - E70 vehicles

Rear Hub Bushing Tool Kit for BMW 1 / 3 Series
For extracting and installing the rear outer bushings
fitted to the camber and trailing arm on BMW 1 and 3 series.
With Split bushing alignment sleeve and insertions Cups
Knuckle joint extractor / M12 : Nut / Bearing assembly / Force Nut.
Applicable to BMW Series 1 and 3 / 2004 to 2012

Fiat Rear Bushings Service Kit
For the installation of rubber bushings /
vibration isolators on rear axles.
Applicable to :
Fiat Stilo / 01 - 07
Fiat Bravo / 07
Lancia Delta / 08

Ford Bushing Service Kit
Suitable for the rear mounted Bushing Isolators.
No need to remove the trailing link assembly.
Applicable to Ford Ka and Fiesta vehicles.

Ford Bushing Service Kit
Suitable for the rear mounted Bushing Isolators.
No need to remove the trailing link assembly.
Applicable to Ford Mondeo 2001 onwards

Rear Bushing Tool - Ford Focus Mk1
For servicing the rear subframe bushings
No need to remove subframe from vehicle.
Applicable to : Ford Focus MK1 1998-2004.

Trailing Arm Bushing Removal Tool
For servicing the trailing arm bushing on Ford / Volvo vehicles
in-situ without the need to disconnect the brake lines
or the removal of the bushing positioning bolts or mounting plates.
Applicable to Ford Mondeo / Galaxy / S-Max and
Volvo S60 / 80 | XC60 / 70 | V60 / 70 models

Honda Rear Trailing Arm Bushing Tool
For the replacement of the Rear Trailing Arm Bushing Isolator
Hook design to securely mount the tool on to the trailing arm assembly.
Provides maintenance to the trailing arm assembly without damage
to the ABS sensor cable and other parts close to the bushing.
Applicable to : Honda CR-V 1996/9 - 2002/8. K6. K8

Mercedes Bushing Service Kit
For removing and installing steering and suspension Bushing Isolator.
Applicable to BMW and Mercedes Benz

Mercedes Bushing Service Kit
For removing and installing Screw Pivot Bushing Isolator.
Applicable to Mercedes Benz W220 / W211 / W203

Toyota Rear Axle Suspension Bushing Tool Set
For removing / installing rear suspension bushings on many Toyota vehicles.
Applicable to : Toyota Avensis / Corolla / Previa / Yaris / Camry / Picnic.

VW T5 Front Axle Control Arm Bush Tool Set
For removal and installation of the Front and
Rear bushings on the front axle control arm.
Suitable for VW T5 / 2005 - 2011
OEM Bushing Code : 7H0 407 182 | 7H0 407 183
and aftermarket d

VAG Bushing Service Kit
Suitable for the Bushing Isolators on the front lower wishbone.
No need to remove the aluminium housing.
Applicable to Seat / Skoda and VW vehicles.
Use with a 24mm Spanner.

VAG Front Bushings Service Kit
For the installation of rubber bushings / silent blocks
or vibration isolators on front axle brackets.
Applicable to :
Audi A2 | VW Polo IV 9N / 02-05
Skoda Fabia 1
Seat Ibiza 6L / 02-06 and Cordoba from 2002
OEM Codes : 3062 | 3253/8 | T10037

Front Bushing Service Kit - VW / Polo
Can be used in-situ without removing assembly from vehicle
Spindle and Shoulder extensions - M10 x 1.25
Shoulder Nut M10 x 1.25
Press Piece and insertion
Centring Ring

Bushing Service Tool - VAG
For replacing the front suspension bushings
on VW Polo 2002 and later.

VW Audi Rear Suspension Tool
For replacing the rear axle mounted bushings
Used in-situ on the vehicle without the need to remove the axle assembly
Allows the bushings to be fitted quickly without damaging vehicle.

2pc Strut Leg Pry Socket Set
Unique shape bits
7 x 5mm | 8.2 x 5.5mm - 1/2in.Dr
Reduces risk of damage to hub casting.
Applicable to Ford | Peugeot | Renault | VAG.

Suspension Joint Pin Socket - 1/2in.Dr
For use on castellated suspension joint nuts.
Applicable to PSA - Citroen / Peugeot Vehicles :
Citroen BX : 9 / 1982-1994
C5 Xantia
Peugeot 305 : 7 / 1982-1990 | 405 / 6 / 1987 | 406 | 605 | 607 etc.

Suzuki Suspension Castle Nut Socket
4 Pin / 1/2in.Dr Socket
External 43mm / Internal 30.5mm
Pins : 5mm x 6.3mm
Applicable to : V650 / 1000 | DI650 / 1000 | V-Storm
Also Hayabusa / Bking and GSX-R750 / 1000 / 1100

13mm Suspension Top Mount Nut Wrench
for VAG - Audi | Seat | Skoda | VW
13mm 6 / 8 point Dual Sided Swivel Socket
120mm Total Length with 3/8in.drive.
Specialist tool designed to be used when
removing the top of Macpherson strut m

Suspension Strut tool
Dual Size : 5 / 6mm x 182mm long.
Prevents the damper piston rod from rotating
while removing and replacing the rear strut.
Suitable for Vauxhall / Opel / Ford / VAG and Japanese vehicles.

5pc Strut Nut Tool Set
Used in conjunction with a 22mm Spanner or Socket.
Sizes - 10.5 x 3.5 | 12.5 x 3.5 | 14 x 2.5 | 14.5 x 3 | 14.5 x 5
For Macpherson front and rear struts on Audi / VW.
Holds the damper shaft during the removal of the strut nuts.

Turnbuckle for Shock Absorber Top
Unique and comprehensive set of tools
for servicing spring or strut shock absorbers.
Suitable for a wide variety of vehicles
in conjunction with spring compressors.
Chrome Vanadium sockets and
Strut Nuts with 22mm hex drive.
Specialist bits with 10mm hex drive
Go-Thru Ratchet : 19 | 22mm.

Wishbone Extractor Tool
Suspension Arm Lever pushes down the suspension
for servicing the drive shaft or wheel bearing.
Total length - 1180mm
Comfortable rubber grip
Adjustable canter lever hook
Sliding adjustment for easy positioning

Universal Wishbone Lever Tool with Chain
Maximum Traction : 500kg
Total Length with Hook : 1030mm
Clamping Height : 65mm to 265mm
Chain length including hook : approx. 660mm
Enables lowering of the wishbone and holds in the retracted position.
Ideal for replacing the wheel bearing / repairing struts or drive shafts.
Prevents damage to the ball joints and drive shaft sleeves.
Low height for easy and fast assembly.

3pc BMW Camber Adjustment Tool Set
For adjusting the camber of many BMW vehicles
when using a BMW KDS type alignment system.
Tool remains on the spring strut until all screws
are tightened so no recalibration required.
Suitable for BMW models - E38 to E93

VAG Camber Adjustment Tool Set
22mm Hexagonal Spindles.
3 Spindle Lengths : 75 | 85 115mm.
Pressure width 135 to 175 mm.
75mm for Seat - Toledo | VW - Jeta / Golf
85mm for Seat - Cordoba | VW - Polo / 95>
115mm for Chrysler - Voyager

2pc Coil Spring Compressor
355mm Jaw Capacity
For use On or Off vehicles when working on suspension struts
Can be use with a 1/2in.Dr Ratchet or 21mm Spanner / Socket

2pc Coil Spring Compressor
For use with 21mm socket or spanner
Total Length : 280mm
For the quick and safe removal or installation of coil springs.
Suitable for passenger cars and light duty trucks.
Heavy duty steel construction.

Heavy Duty Coil Spring Compressor with Brace
Adjustable brace to prevent accidental release of spring under load
enabling the parts of the tool used for removing the coil to always operate in parallel.
Range : 23mmm - 280mm
Capacity per pair : 1200 kg Max.
Use with a 19mm Socket or Wrench.

Heavy Duty Telescopic Coil Spring Compressor
with 100 - 185mm diameter capacity
Use with a 28mm Spanner or Impact Socket and Impact Wrench