Automotive Battery Tester
Voltage Test Range : 2.0 | 3.0 | 4.0 | 5.0 | 9.0 | 12.0 | 12.5 | 13.5V
Indication : LED lights up to the Voltage reading.
Frequency range: 0 to 60 Hz.

12 Volt Battery Capacity Testing
LED light display
Weight 95g
NOTE - Chemical Properties can not be tested

Battery Tester >br> Suitable for 6 | 12 | 24V DC circuits
Knurled metal body with test light.
Probe tip is covered with protective screw cap.
Tester illuminates when voltage is present.

Automotive Battery Tester
Suitable for 6 | 12 | 24V DC circuits
For detecting faults in low tension circuits in automotive vehicles.
such as Cars | motorcycles | bulldozers | road rollers | excavators

Digital Battery Tester
125A battery load tester for 12V DC lead acid batteries
Battery condition LEDs give a very clear indication of the test results

Automotive Battery Tester with Integral Printer
For testing most 6V / 12V batteries
and 12V /24V Starting / Charging systems.
CCA Test Range : 40 - 2000 CCA / SAE.
Voltage Test Range : 1.5 - 30V.
Accuracy : 0.1V / CCA 5 percent / IR 5 percent.
3.2in. LCD Display back lit with adjustable brightness.
Integrated thermal printer with 57mm x 6.5M paper roll.
Multiple language display and Data up-load function.
Accessories : U disk / 3 Paper Rolls / Mini USB cable.

Automatic Battery Charger
Voltage Input : 230V AC/ 50Hz
Voltage Input Power : 75W
Voltage Output : 12V DC
Charging Current : 4.2A Effective
Battery Capacity : 20 - 80Ah
LED Indicator
Switch to Float Mode Automatically
Overcharging / Reverse Polarity and Short Protection

Automatic Battery Charger
Voltage Input : 230V AC / 50Hz
Rated Input Power : 158W
Voltage Output : 6V / 12V DC Selectable
Charging Current :
6V - 8.4A Fast / 5.2A Slow
12V - 8.4A Fast / 6A Slow
Battery Capacity :
6V - 40-160Ah Fast / 9-36Ah Slow
12V - 40-160Ah Fast / 15-60Ah Slow

12/24V Multi-Function Jump Starter
and Multi-function Travel Battery Charger
Suitable for Emergency Jump starting vehicles
or Charging Mobile Phones and Cameras.
Capacity : 30000mAh
Input : 14V / 2 Amp
Output : 5V / 1 Amp | 12V / 10 Amp
With LED Light

14V Multi-function Travel Battery Pack
With LED Light and Smart Cable Function.
Suitable for Emergency Jump starting vehicles.
Also Charging Mobile Phones
Photographic Equipment and Tablet Pcs
Capacity : 15000mAh
Output : 12V Jump Start | 19V / 3.5V | USB 5V
5hr Charge Time
Size : 189 x 80 x 37mm

12V Multi-Function Jump Starter / Emergency Work Light
480 Lumen LED work light
60 Lumen Focus Beam with SOS mode.
Jump Start Power : 500A peak cranking amps.
400A/3s for 4.0L petrol / 2.5L diesel vehicles.
IP54 Water resistant Housing with Dual USB Outlets.
Magnetic mounting.
See Video at : https://youtu.be/6WNW2dlJCSE

12V / 24V Ultra-Capacitor Jump Starter
Charging Voltage : 12V / 24V DC
Starting Current : 1500A / 900A
Peak current : 2200A / 1500A
Recharge Time : < 270 seconds
Max. Consecutive Starts : 5
Min. Interval : 20 minutes
Wo

Heavy-Duty Smart Trolley Battery Charger & Starter
LCD Display for easy reading with Slow and Fast Charge modes.
Input : 220V - 240V AC | 50 - 60Hz | 13A
Output : 12V DC - 10A /30A / 60A
Output : 24V DC - 5A /15A / 30A
Engine-cranking : 12V DC / 200A / 5s on / 180s off
Protected against Overcharge / Short Circuit and Reverse Polarity.
Supplied with Smart Clamp Leads.
Suitable battery types : STD | AGM | GEL | LifeP04

Heavy Duty Jump Lead Clips - 600A
Large size : 155mm
Suitable for all car and truck batteries.
Durable / strong and Easy to attach.

2pc Automotive Battery Terminal Cleaner Set
Fits all terminal posts
Wire Brush for removing corrosion build-up
on battery posts and Terminals for improved electrical contacts.

Battery Terminal Puller
Jaw Capacity : 10 - 40mm
Fits most battery terminal posts without damage

Battery Terminal Crimping Tool
For replacing or repairing automotive / marine battery cables
allows secure crimping when used with a hammer or vice.
Wire gauge : 1/0 | 2/0 | 3/0 and 4/0
1 AWG | 3 AWG | 4 AWG | 6 AWG | 8 AWG
Easy to use

Universal Car Battery Isolator Cut-Off Switch
for Standard Round Post Batteries

Battery Hydrometer
For the Hot or Cold testing of Lead Acid Batteries
Range 110SP Discharged to 1300SP Fully Charged

Automotive Stethoscope
For detecting unusual mechanical noises
Usually generated from the bearings / shafts or tappets

Electronic Stethoscope Kit
Detect and identify noisy components
Super sensitive microphone with cushioned headphones
4 Pick-up sensors with 4.8 metre long cord

Digital Multimeter
LCD Display with Max. reading : 1999
Overload protection
Low battery indication
Measurement Functions : AC Voltage
DC Current | DC Voltage | Resistance and Diode.
Ideal for use in the Home / Laboratory or Workshop.

3 in 1 Tester for Batteries / Bulbs and Fuses
For AAA / AA / C / D and 9V batteries
Domestic and automotive fuses plus various bulbs.
Readings show up on a clear colour coded scale.
Powered by a 9V battery included.

Fuse Buddy Tester with LED light
Ideal for automotive electrical circuits.
Connects directly into the fuse socket.
Removed fuse is plugged into the Fuse Buddy
maintaining circuit protection.
Range : 0-20 Amps / 19.99V DC or AC

12V Universal Automotive Relay Tester
Tests three of the most popular relay types on most modern cars.
Red Light - Test results abnormal.
Green Light - Test results normal.
Uses 12V power from vehicle battery.

Automotive Circuit Fault Detector
Checking for Short Circuits
Locating Open Circuits
Battery Voltage Indicator
Range of measurement : 6 - 42V DC

92pc Automotive Probe & Cable Set
For checking all types of Automotive electrical circuits in conjunction
with other test equipment - multi-meters / oscilloscopes and simulators.
Includes : 2 Potentiometers | 2 LED Stroboscopes | 2 SRS Connectors
2 Alligator Clips | 4 Probes | 6 Connectors | 72 Test Leads

Circuit Tester
For General and Hybrid Vehicles
12 / 42 Volt Systems
Blue LED for 12 Volt
Red LED for 42 Volt
Safe for low current circuits
Tester only draws 3 milliamps

Circuit Tester
For General and Hybrid Vehicles
12 / 42 Volt Systems
Blue LED for 12 Volt
Red LED for 42 Volt
Safe for low current circuits
Tester only draws 3 milliamps

Automotive Voltage Tester
with 3-48 Volt DC range
Circuit Tester with 1M Lead
Plus Test Probe and Crocodile Clip
Pierce through clip for cable < 0.157in.
Cable length 39in. / 1000mm
Ideal for automotive circuit component fault finding.
With Negative and Positive Voltage LED indicators.

Digital LCD Circuit Tester 3 - 48 Volt Range
Computer Safe with backlit LCD display
Long Probe for use in confined spaces.
Sharp stainless steel probe for easy wire piercing.
Use to check electrical circuits on all 3 - 48 volt systems
Cable length : 11ft uncoiled
Voltage : DC 3 - 48V
Current Draw : 3 - 20V / 17mA | 20-48V /10mA
For positive and negative electrical charge.

6 - 12V Circuit Tester
Automotive circuit tester with 900mm insulated cable and earth clip
Insulated contact point prevents accidental shorting
Check for presence of voltage quickly and easily

Circuit Tester
Power On
For 6 / 12 and 24 Volt Circuits
Insulated Ground Clip
Stainless Steel Probe
Heavy Duty 5ft Lead

Automotive Clamp Meter
Digital LCD Screen Max. reading : 1999
Overload Protection | Auto Ranging | Zeroing Function
Max. Measurable Conductor : 25mm diameter
Voltage AC / DC : 600V
Current AC : 20 / 200 / 600A
Resistance : 2k Ohms
Continuity : Yes
2 x 3V CR2032 Batteries

Multi-Function Audible Auto Tester
For 12 - 24 Volt Systems
Voltage Testing
Polarity Testing
Continuity Testing
Ignition Pulse Frequency
Peak Detection

Diagnostic / Service Cable for Tesla Model X / S
Length : 1.5m / 5ft
Cable : High quality black Ethernet cable
with FAKRAHSD RJ45 and Z connectors - without jamming
Applicable to : S/X model to 2016 model year / possibly higher.
O

Diagnostic / Service Cable for Tesla Model 3 / Y
Length : 1.5m / 5ft
Easy to install
Direct replacement for the old or broken one.
OEM Code : 1137658-00-C

3pc Glow Plug Socket Set
Sizes : 8 | 9 | 10mm
Sockets with a lateral slot
for restricted access.
Use with a 10mm Spanner
Chrome Vanadium
Applicable to Fiat / GM vehicles

4pc 3/8in.Dr Glow Plug Socket Set
Sizes : 8mm | 10mm | 12mm.
72mm long with universal joint
Plus 75mm extension bar.
For all popular glow plugs.
Chrome Vanadium

6pc 3/8in.Dr Socket Set for Glow Plugs
Sizes : 8 | 9 | 10 | 12 | 14 | 16mm with Universal Joints
85mm Long
Chrome Vanadium

6pc 3/8in.Dr Socket Set for Glow Plugs
Sizes : 8 | 9 | 10 | 12 | 14 | 16mm
with Universal Joint

18pc PSG Glow Plug Removal Set
Includes the latest special sockets for Pressure Sensor Glow Plugs.
Extension Bar | Universal Joint - 1/4in.Dr
8 | 12mm Deep Socket - 1/4in.Dr - 50mm long
8 | 9 | 10mm Deep Sockets 1/4in.Dr and 3/8in.Dr with universal joints.
8 | 9 | 10mm Sockets with a lateral slot - Use with a 10mm Spanner
5 PSG plastic anti-static protection caps.

11pc Master Service Set
for Spark Plugs and Glow Plugs
Spark Plug Sockets : 14 | 16 | 16 thin wall / 21mm
Glow Plug Sockets : 8 | 10 | 12mm
22mm Sensor Socket
Extension Bars 75mm and 250mm

Glow Plug Electrode Removal Tool Set
Suitable for M8 and M10 glow plug threads
Tap sizes
M8 x 1.0 | M10 x 1.0 | M10 x 1.25
M3 x 0.5 Tap 100 mm
M4 x 0.7 Tap 100 mm
Special drills 2.5 x 120 mm | 3.3 x 140 mm
180 mm pulling bolt

6pc Glow Plug Electrode Socket Set - 1/4in.Dr
For turning off the electrodes in conjunction with CT3381
Sockets : 2.6 | 3.2 | 3.5 | 4.5 | 6.5 | 8.25 mm

Universal Glow Plug Extractor Kit
Contraction collet : size 1 / 2.7mm
Contraction collet : size 2 / 3.6mm
Contraction collet : size 3 / 5.0mm
Contraction collet : size 4 / 6.0mm
T-bar slide hammer / puller
Internal expansion collet puller

Glow Plug Removal Set
For Removing Damaged or Difficult 8 and 10mm
Glow Plugs from the Cylinder Head.

Glow Plug Removal Master Kit
For removing 8-10mm damaged and broken glow plugs from cylinder heads
With special glow plug extractors and puller adapter mandrels -
M8 | M10 | 1/4in. Taps small / large anti-clockwise taps
Ratchet T-bar / Extractor Sockets
Step Drill / Drill Bits / Pilot drill centring sleeves.
Glow plug chamber cleaning brushes.
Hex keys

6pc Glow Plug Puller and Reamer Set
Glow Plug Sockets : 8 | 9 | 10mm with Universal Joint
Reamers : M10 | M12
For the removal of glow plugs and port maintenance on most diesel engines.

3pc Glow Plug Reamer Set
For cleaning the glow plug port aperture.
Cleaning the port aperture is recommended before installation of new glow plug.
M12 x 1.25 x 59mm reamer | 6.9mm Diameter
M12 x 1.25 x 94mm reamer | 6.9mm Diameter