New Products
Low Noise Packing Tape

CT5661

Warning Tape - Low Noise

Warning Tape - Clear with Mad Munk Logo
Size : 48mm x 66M / Low Noise
Ideal packing tape for most items.

Low Noise Packing Tape
t Click picture for more information
Low Noise Packing Tape

CT5662

Warning Tape - Low Noise

Warning Tape - Clear with Neilsen Logo
Size : 48mm x 66M / Low Noise
Ideal packing tape for most items.

Low Noise Packing Tape
t Click picture for more information
Black Idustrial Shrink Wrap

CT5656

Idustrial Shrink Wrap

Pallet Shrink Wrap
Black : 500mm x 250M
For wrapping and protecting goods in transit on a pallet.

Black Idustrial Shrink Wrap
t Click picture for more information
White Idustrial Shrink Wrap

CT5657

Idustrial Shrink Wrap

Pallet Shrink Wrap
White : 500mm x 250M
For wrapping and protecting goods in transit on a pallet.

White Idustrial Shrink Wrap
t Click picture for more information
Turbo System Leak Tester Kit

CT5646

Turbo System Leak Tester Set - 9pc

Turbo System Leak Tester
Used in conjunction with an air line to show the presence of leaks.
Kit supplied with 8 stepped adaptors to fit most hose sizes.
Features a pressure gauge with shut-off valve and pressure release valve.
Can also be used on cooling systems.

Turbo System Leak Tester Kit
t Click picture for more information
Fuel Pump Pressure Test Kit

CT5608

Fuel Pressure Test Kit

Diesel High Pressure Pump Test Kit
Essential tool for diagnosing the fuel circuit of diesel common rail systems.
With high pressure gauge / flexible hoses / dummy pump regulator
and injector pipe blanks for a variety of tests :
Engine cranking / running pressure test
Maximum pump pressure test
Pump pressure regulator test
Injector leakage test

Fuel Pump Pressure Test Kit
t Click picture for more information
Crankshaft Alingment Tool for DAF Trucks

CT5632

Crankshaft Alingment Tool - DAF

DAF Commercial Vehicle Crankshaft Alignment Tool
This heavy duty tool allows crankshaft rotation via the flywheel.
6 point drive x 24mm x 11 teeth
Applicable to 35T DAF trucks :
65CF | 75CF | 85CF | 95XF | CF75 | CF85
F65 | F75 | F85 | F95 | XF95

Crankshaft Alingment Tool for DAF Trucks
t Click picture for more information
Gear Puller - 5 Ton 3 Legs

CT5647

Gear Puller - 5 Ton 3 Legs

5 Ton Hydraulic Gear Puller
Maximum Capacity : 5T
Maximum Horizontal Pull Distance : 200mm
Maximum Vertical Pull Distance : 140mm
Axis Stroke : 50mm
Suitable for pulling hubs / flanges / gears and bearings.
Equipped with 3 reversible jaws suitable for different needs.

Gear Puller - 5 Ton 3 Legs
t Click picture for more information
Gear Puller - 10 Ton 3 Legs

CT5648

Gear Puller - 10 Ton 3 Legs

10 Ton Hydraulic Gear Puller
Maximum capacity : 10T
Maximum Horizontal Pull Distance : 250mm
Maximum Vertical Pull Distance : 160mm
Axis Stroke : 50mm
Suitable for pulling hubs / flanges / gears and bearings.
Equipped with 3 reversible jaws suitable for different needs.

Gear Puller - 10 Ton 3 Legs
t Click picture for more information
Gear Puller - 30 Ton 3 Legs

CT5652

Gear Puller - 30 Ton 3 Legs

30 Ton Hydraulic Gear Puller
Maximum capacity : 30T
Maximum Horizontal Pull Distance : 400mm
Maximum Vertical Pull Distance : 250mm
Axis Stroke : 75mm
Suitable for pulling hubs / flanges / gears and bearings.
Equipped with 3 reversible jaws suitable for different needs.

Gear Puller - 30 Ton 3 Legs
t Click picture for more information
Gear Puller - 50 Ton 3 Legs

CT5653

Gear Puller - 50 Ton 3 Legs

50 Ton Hydraulic Gear Puller
Maximum capacity : 50T
Maximum Horizontal Pull Distance : 500mm
Maximum Vertical Pull Distance : 400mm
Axis Stroke : 75mm
Suitable for pulling hubs / flanges / gears and bearings.
Equipped with 3 reversible jaws suitable for different needs.

Gear Puller - 50 Ton 3 Legs
t Click picture for more information
Mercedes Bus Differential Nut Socket

CT5629

Differential Nut Socket

72mm Differential Nut Socket
For loosening or tightening the castellated differential nut
used on the Mercedes-Benz Citaro and Evo Buses.
Castellated 6 Tooth Socket : 11 x 6 x 12mm deep Teeth
Outside Diameter : 84mm | Inside Diameter : 72mm.
Depth : 60mm with 32mm Hex drive.

Mercedes Bus Differential Nut Socket
t Click picture for more information
Rear Axle Groove Nut Socket

CT5628

Axle Groove Nut Socket

Mercedes Rear Axle Groove Nut Socket
For 6 teeth groove nuts on low-floor buses with SF portal axle AV132 -
Mercedes-Benz Citaro Bus / MAN City-Line / Neoplan / Kassbohrer
and other vehicles with identical axle.
Designed for high tightening and release torque values.
by hand or impact wrench operation.
Drive tube diameter : 35 mm

Rear Axle Groove Nut Socket
t Click picture for more information
BPW Brake Linkage Adjuster Extractor

CT5630

Brake Linkage Adjuster Extractor - BPW

BPW Brake Linkage Adjuster Extractor
Substantial Tool for drawing off firmly sitting BPW brake linkage adjusters.
Suitable for older and automatic linkage adjusters.
Use with 32mm wrench.
Spindle size : M22 x 1.5 x 90mm

BPW Brake Linkage Adjuster Extractor
t Click picture for more information
IVECO Axle Hub Nut Socket

CT5621

Axle Hub Nut Socket - 105mm IVECO

IVECO Axle Hub Nut Socket
Size : 105mm / 12 Point - across flats
Use with 36mm spanner | 6 Point drive
Applicable to IVECO Eurotech Cursor trucks.

IVECO Axle Hub Nut Socket
t Click picture for more information
BPW Truck Axle Extractor

CT5631

Axle Extractor - BPW

BPW Axle Extractor - M136 x 2.5
Extremely robust European truck repair tool applicable to :
BPW ECO Plus 8 - 12 ton and BPW ECO 10 ton models.
Used in combination with 43mm and 30mm spanners
Inner size : M136 x 2.5mm
Outer size : 150mm

BPW Truck Axle Extractor
t Click picture for more information
MAN TGA Rear Axle Extension Tube

CT5625

Axle Extension Tube - MAN TGA

Extension Tube for MAN TGA Rear Axle
For the removal and installation of wheel hubs.
Protects the wheel bearing and threaded bolts.
With knurling and bore for Tommy Bar.
Thread : M100 x 1.5 | Inner Size : 95mm | Outer Size : 105mm | Length: 360mm
Applicable to MAN TGA Rear Axle / HY-1350

MAN TGA Rear Axle Extension Tube
t Click picture for more information
Axle Bearing Extractor - MAN

CT5623

Axle Bearing Extractor - MAN

MAN Truck Axle Bearing Extractor
For removing and replacing MAN truck hub bearings.
Turn the screw and remove the old bearing.
Use with 30mm wrench
Applicable to MAN Truck Hub bearings.

Axle Bearing Extractor - MAN
t Click picture for more information
Wheel Hub Installer - MAN

CT5624

Wheel Hub Installer - MAN

MAN Truck Front Wheel Hub Installer
For axle bearings that are stuck due to over heating.
Can be used in conjunction with an air wrench for easier removal.
Suitable for pulling off wheel hubs with 166mm hole diameter.
Ideal European truck repair tool with extremely robust execution.
Disc size : 87 x 166 x 118mm

Wheel Hub Installer - MAN
t Click picture for more information
Chain and Clevis Hook

CT0969

Chain and Clevis Hook - 6M

Chain with 2 Clevis Hooks
Chain length : 6M length
Working Load : 3.15T
Suitable for Towing / NOT Lifting

Chain and Clevis Hook
t Click picture for more information
Clevis Grab Hook - 3.15T

CT5458

Clevis Grab Hook - 3.15T

3.15 Ton Clevis Grab Hook
5pc Set suitable for CT0969

Clevis Grab Hook - 3.15T
t Click picture for more information
Chain and Clevis Hook - 6M

CT5459

Chain and Clevis Hook - 6M

Chain with 2 Clevis Hooks and Cast Latch
Chain length : 6M length
Working Load : 3.15T
Suitable for Towing / NOT Lifting

Chain and Clevis Hook - 6M
t Click picture for more information
Clevis Cast Latch Sling Hook

CT5460

Clevis Sling Hook with cast latch - 3.15T

3.15 Ton Clevis Sling Hook with cast latch
5pc Set suitable for CT5459

Clevis Cast Latch Sling Hook
t Click picture for more information
Chain Connector for 2 chains

CT5461

Chain Connector for 2 chains

Chain Connector for 2 chains
Suitable for use with CT0969 & CT5459

Chain Connector for 2 chains
t Click picture for more information
Tap Holder Socket Set

CT5615

Tap Holder Socket Set - 10pc

10pc Tap Holder Socket Set
with 1/4in.Dr and 3/8in.Dr / Magnetic Sockets
1/4in.Dr Sizes : 2.8 | 3.4 | 4 | 4.5 | 4.6 | 5.4mm / Depth : 32mm
3/8in.Dr Sizes : 6.4 | 7 | 7.3 | 8.4mm / Depth : 40mm
For driving thread cutting taps from M1.5 to M14.
Sockets have a square recess and magnets to hold tap shanks.
For use with 1/4in.Dr and 3/8in.Dr ratchets
ideal for restricted access where T-handle tap holders will not reach.

Tap Holder Socket Set
t Click picture for more information
Warning Light Set - Red

CT5449

Warning Light Set - Red

Red Magnetic Rechargeable Warning Lights
Strong magnetic base for use on trucks and agricultural vehicles.
Input voltage : 12 / 24V DC.
Charging voltage : 5V DC
Battery capacity : 2600MAH
Charging time : 2 hours / approx. with 8 hours usage on full charge.
Waterproof level : IP67

Warning Light Set - Red
t Click picture for more information
Warning Light Set - Amber

CT5450

Warning Light Set - Amber

Amber Magnetic Rechargeable Warning Lights
Strong magnetic base for use on trucks and agricultural vehicles.
Input voltage : 12 / 24V DC.
Charging voltage : 5V DC
Battery capacity : 2600MAH
Charging time : 2 hours / approx. with 8 hours usage on full charge.
Waterproof level : IP67

Warning Light Set - Amber
t Click picture for more information
Warning Light Set - Blue

CT5451

Warning Light Set - Blue

Blue Magnetic Rechargeable Warning Lights
Strong magnetic base for use on trucks and agricultural vehicles.
Input voltage : 12 / 24V DC.
Charging voltage : 5V DC
Battery capacity : 2600MAH
Charging time : 2 hours / approx. with 8 hours usage on full charge.
Waterproof level : IP67

Warning Light Set - Blue
t Click picture for more information
Warning Light Set - Green

CT5452

Warning Light Set - Green

Green Magnetic Rechargeable Warning Lights
Strong magnetic base for use on trucks and agricultural vehicles.
Input voltage : 12 / 24V DC.
Charging voltage : 5V DC
Battery capacity : 2600MAH
Charging time : 2 hours / approx. with 8 hours usage on full charge.
Waterproof level : IP67

Warning Light Set - Green
t Click picture for more information
Drill Vice - 125mm

CT1964

Drill Vice - 125mm

5in. Drill Press Vice
Cast iron vice designed for use with bench drills and drill presses.
Low profile suitable for many metal and woodworking applications.

Drill Vice - 125mm
t Click picture for more information
Drill Vice - 150mm

CT1965

Drill Vice - 150mm

6in. Drill Press Vice
Cast iron vice designed for use with bench drills and drill presses.
Low profile suitable for many metal and woodworking applications.

Drill Vice - 150mm
t Click picture for more information
Drill Vice - 80mm / Unigrip

CT1966

Drill Vice - 80mm / Unigrip

3in. Drill Press Vice
Cast iron vice designed for use with bench drills and drill presses.
Low profile suitable for many metal and woodworking applications.
The locking spindle moves inside the hollow handle grip
allowing the vice to be tightened at any position on the drilling table.
Long clamping slots for rapid adjustment of the vice on the work table.

Drill Vice - 80mm / Unigrip
t Click picture for more information
Drill Vice - 100mm / Unigrip

CT1967

Drill Vice - 100mm / Unigrip

5in. Drill Press Vice
Cast iron vice designed for use with bench drills and drill presses.
Low profile suitable for many metal and woodworking applications.
The locking spindle moves inside the hollow handle grip
allowing the vice to be tightened at any position on the drilling table.
Long clamping slots for rapid adjustment of the vice on the work table.

Drill Vice - 100mm / Unigrip
t Click picture for more information
Drill Vice - 120mm / Unigrip

CT1969

Drill Vice - 120mm / Unigrip

3in. Drill Press Vice
Cast iron vice designed for use with bench drills and drill presses.
Low profile suitable for many metal and woodworking applications.
The locking spindle moves inside the hollow handle grip
allowing the vice to be tightened at any position on the drilling table.
Long clamping slots for rapid adjustment of the vice on the work table.

Drill Vice - 120mm / Unigrip
t Click picture for more information
Steel Cutting Discs - Ultra Thin

CT5566

Steel Cutting Discs - 50pc 115mm

50 Steel Cutting Discs
115mm x 1mm
Bore : 22.23mm
Speed : 13300rpm | 80m/s

Steel Cutting Discs - Ultra Thin
t Click picture for more information
18 Volt Cordless Sliding Miter Saw

CT5305

Miter Saw - 18V

18V Cordless Sliding Mitre Saw with Laser
Saw blade : 210mm x 40T
Battery Voltage : 18V
Battery capacity : 4Ah Li-ion
Input : 110 - 240V - 50 / 60Hz
No-load speed : 3800rpm
Supplied with Battery and Fast Charger

18 Volt Cordless Sliding Miter Saw
t Click picture for more information
Fishtail Nail Puller

CT1796

Nail Puller - 12in.

12in. / 310mm Double Ended / Fishtail Nail Puller

Fishtail Nail Puller
t Click picture for more information
Moulding Bar

CT1795

Pry Bar - 10in.

10in. / 250mm Moulding Bar
For remove mouldings / tiling / flooring / window and door frames without damage.

Moulding Bar
t Click picture for more information
Pry Bar

CT1710

Pry Bar - 20in.

20in. / 510mm Pry Bar

Pry Bar
t Click picture for more information
Bricklaying Profile Clamp

CT5445

Bricklaying Profile Clamp - 330mm

13in. / 330mm Bricklaying Profile Clamp
Sliding with
T-Bolt Screw / 80mm Thread
Solid Steel / Zinc Plated

Bricklaying Profile Clamp
t Click picture for more information
Bricklaying Profile Clamp

CT5593

Bricklaying Profile Clamp - 560mm

22in. / 560mm Bricklaying Profile Clamp
Sliding with
T-Bolt Screw / 80mm Thread
Solid Steel / Zinc Plated

Bricklaying Profile Clamp
t Click picture for more information
230mm External Profile Clamp

CT5562

Bricklaying Profile Clamp - 230mm

9in. / 230mm External Profile Clamp
for External Building Profile

230mm External Profile Clamp
t Click picture for more information
355mm External Profile Clamp

CT5563

Bricklaying Profile Clamp - 355mm

14in. / 355mm External Profile Clamp
for External Building Profile

355mm External Profile Clamp
t Click picture for more information
560mm External Profile Clamp

CT5564

Bricklaying Profile Clamp - 560mm

18in. / 460mm External Profile Clamp
for External Building Profile

560mm External Profile Clamp
t Click picture for more information
Bench Vice

CT2039

Bench Vice - 3in.

3in. / 75mm Bench Vice

Bench Vice
t Click picture for more information

 

Next Last

Product Search

Search Icon
Section 1 Icon Section 2 Icon Section 3 Icon Section 4 Icon Section 5 Icon Section 6 Icon Section 7 Icon Section 8 Icon Section 9 Icon Section 10 Icon

Cannon Tools Limited   •  20 Station Road,  Rowley Regis,  West Midlands,  B65 0JU,  United Kingdom

 T +44 (0) 121 561 6760