Section 8.20 | Cannon Tools

On-Site Tools & Equipment

CT0400

Scaffolding Wrench - 21mm

21mm Scaffolding Wrench
12 point Swivel Head
Heavy Duty harden steel drop forged
with hole for Tool Safety Lanyard

CT3860

Scaffolding Wrench - 21mm

21mm Scaffolding Wrench
Harden drop forged steel Swivel Head

CT1810

Scaffolding Wrench - 17 / 21mm

Ratchet Scaffolding Wrench
Sizes : 17 / 21mm
Pry Bar Handle
Ideal for scaffolding and construction.

CT2930

Scaffolding Wrench - 19 / 21mm

Ratchet Scaffolding Wrench
Sizes : 19 / 21mm
Pry Bar Handle
Ideal for scaffolding and construction.

CT3801

Scaffolding Wrench - 19 / 24mm

Ratchet Scaffolding Wrench
Sizes : 19 / 24mm
Pry Bar Handle
Ideal for scaffolding and construction.

CT5066

Scaffolding Wrench - 17 / 21mm

Ratchet Scaffolding Wrench
Sizes : 17 / 21mm
with 24 tooth Ratchet Mechanism
Claw Hammer Head and Pry Bar Handle
Chrome Vanadium

CT5067

Scaffolding Wrench - 19 / 21mm

Ratchet Scaffolding Wrench
Sizes : 19 / 21mm
with 24 tooth Ratchet Mechanism
Claw Hammer Head and Pry Bar Handle
Chrome Vanadium

CT4721

Scaffolding Wrench - 19 / 22mm

Ratchet Scaffolding Wrench
Sizes : 19 / 22mm
with 24 tooth Ratchet Mechanism
Claw Hammer Head and Pry Bar Handle
Chrome Vanadium

CT5326

Scaffolding Wrench - 17 / 19 / 21 / 24mm

Ratchet Scaffolding Wrench
Sizes : 17 / 21mm | 19 / 24mm
Pry Bar Handle
Ideal for scaffolding and construction.

CT4196

LED Work Lamp - 230V

230V SMD LED Work Lamp and Bluetooth Speaker
SMD LED Lamp : 1200LM
Up to 36M Flood
230V / 50Hz
Approx. 20000hrs usage
Bluetooth Speaker : 85db max.
IP44 protection against water spray.

CT1543

LED Work Lamp - 230V Twin

230V Twin LED Work Lamp with Telescopic Stand
230V / 40W / 50Hz
24 SMD LEDs each lamp
40M Flood with 120 degree spread
Max. Stand Height : 1800mm

CT2891

SDS Chisel Set - 3pc

3pc SDS Hammer Chisel Set
Ideal for CT0700 and CT0701
17mm Diameter

CT2814

SDS Chisel Set - 3pc

3pc SDS Hammer Chisel Set
Ideal for CT0700 and CT0701 SDS Hammer Drills

CT0287

SDS Drill and Chisel Set - 12pc

12pc SDS Drill and Chisel Set
SDS Drills : 5 | 6 | 8 | 10 | 12 | 14 | 16 | 18 | 20mm
from 110mm to 450mm in Length
Carbide Alloy Tips
SDS Chisels : Flat | Groove | Point - 250mm Long

CT1416

Cut Off Machine - 230V

Cut-Off Machine - 355mm Disc
General purpose abrasive saw suitable for on-site use.
Supplied with abrasive disc suitable for metal-cutting.
Rated Voltage : 230V
Rated Frequency : 50hz
Rated Input Power : 2100W
No-Load Speed : 3600rpm
Max Disc Diameter : 355mm
Cutting Ability : 80mm at 90 degrees
Cutting Ability : 75mm at 45 degrees

CT2464

Cable Access Kit - 1000mm

10pc 1000mm Cable Access Kit

CT2465

Cable Access Kit - 330mm

10pc 330mm Cable Access Kit

CT2791

Fish Tape - 50ft x 1/8in.

50ft x 1/8in. Fish Tape
Used to guide electrical wire through conduits and walls.
Tape winds directly into housing
Automatically wipes off excess lubricant.
4 viewing ports show how much tape is left.

CT1174

Paint Mixer - 85mm

Paddle Mixer
400 Long / 85mm diameter
Hex Steel Shaft
Fits 3/8in. or Larger Drill Chuck
Maximum 900rpm

CT1173

Paint Mixer - 100mm

Paddle Mixer
600 Long / 100mm Diameter
Hex Steel Shaft
Fits 3/8in. or Larger Drill Chuck
Maximum 900rpm

CT4722

Paddle Mixer

Paddle Mixer with SDS Fitting
600mm Shaft and
100mm diameter Mixer Paddle
Chuck size : 10mm or larger
Max Speed : 600rpm.
Chrome plated for easy cleaning.

CT0268

Tarmac Rake

Asphalt or Tarmac Rake
with 16 forged Round teeth and all steel construction
Tubular steel handle with Rubber Soft-Grip.
Blue with 65in. / 1650mm Handle

CT0269

Asphalt Rake

Asphalt or Tarmac Rake
with 16 forged Flat teeth and all steel construction
Tubular steel handle with Rubber Soft-Grip.
Blue with 65in. / 1650mm Handle

CT4343

Pile Drive with Petrol Engine

Petrol Pile Driver
For Fencing Posts / Stakes / Pipe Laying
Single cylinder air cooled 2 stroke engine
Fuel Tank Capacity : 0.9L
Engine Displacement : 32.7cc
Max Torque and speed : 1.45Nm / 5000rpm
Impact Frequency : 2000bpm