Air Tools
CT4756
Impact Driver Set - 6pc
6pc Impact Driver Set for use with Air Hammer Guns
Small Fastener Remover with 5/16in. Hex Impact Bits.
Ph1 | Ph2 | Ph3 | Ph4 and 8mm slotted bit .
A 19mm or 3/4in. open end spanner can be used to
turn the bit holder while impacting the fastener.
Works faster than hand impact tools.
Especially useful for removing seized brake rotor screws.
CT5271
Air Punch / Flange Tool
Air Punch / Flange Tool
Works as both an air punch and air flange for auto body repair.
The air flange has a versatile head that rotates 360 degrees
to easily crimp flanges or lap joint sheets and pipes.
The punch can create 3/16in. holes for fastening and welding.
Air consumption : 4 cfm
Cutting capacity : 16 gauge / 5mm.
Working pressure : 90 psi
Air inlet size : 1/4in. NPT / F
CT5470
Air Grinder - 2in.
50mm Air Mini Angle Grinder with Rear Exhaust.
Includes 2in. / 50mm Cutting and Grinding Discs plus Wrenches.
Operating pressure : 6.3 Bar / 90psi
Free speed : 22000rpm
Air consumption : 6.5cfm
Spindle size : M6
Air inlet : 1/4in.
Ideal for grinding in tight areas i.e weld smoothing
bumper repairs and cutting in hard to reach areas.
Suitable for professional workshop use
CT1077
Air Sander - 5in.
125mm High Speed Air Sander
Max. Speed :16000rpm
Max. Operating Pressure : 6.2bar / 90psi
Avg. Air Consumption : 4cfm
Air Inlet : 1/4in. BSP
3 Fibre backing pads : 75 | 100 | 125mm
Built in speed regulator with side exhaust.
For light sanding jobs like feather edging rust removal.
CT0879
Air Sander - 170 x 93mm
Wet or Dry Air Sander
Pad Size : 170 x 93mm
Air Pressure 6.0bar
Free Speed : 8000rpm
Air Inlet :1/4in. / Air Hose : 3/8in.
Ideal for Metal / Wood and Plastic
Locking Clamps hold sand paper firmly in position.
Contoured Palm Grip for one hand operation.
Ideal for Metal / Wood and Plastic.
CT4694
Sandblaster Kit
Air Sandblaster Gun Kit
With Surface | Inside / Outside Corner | Panel Spot Nozzles
2 x 850g bottles of corundum 60 blasting sand
Working pressure : 6 - 8 Bar / 90 -116psi
Average air consumption : 6.5cfm
Air inlet : 1/4in. BSP
Used for removal of rust and excessive dirt or paint.
Suitable for use with corundum - grain size of 46 to 100.
Ideal for automotive body shop applications on all metallic surfaces.
CT4337
Air Nail Coil Gun - CN45
Air Nail Coil Gun with Aluminium Body
400 conical wire welded nails.
200 plastic sheet collated nails.
Adjustable firing mode and depth.
Operating Pressure : 70-120 psi / 5-8.3 bar.
Nail Range Length : 25 - 50mm / Shank 1.59 - 2.1mm.
Weight : 1.60kg / 3.50lbs
Construction Coil Nailer - CN45
CT4338
Air Nail Coil Gun - CN565B
Air Nail Coil Gun with Aluminium Body
250 - 400 conical wire welded nails.
200 plastic sheet collated nails.
Adjustable firing mode and depth.
Operating Pressure : 70 - 120 psi / 5 - 8.3 bar.
Nail Range Length : 45 - 65mm / Shank 2.3 - 2.5mm.
Weight : 2.5kg / 3.5lbs
CT4339
Air Nail Coil Gun - CN70
Air Nail Coil Gun with Aluminium Body
Load Capacity : 225 - 300 nails
Nail Range : 45mm - 70mm Depth
Nail Head diameter : 5.0 - 7.0mm.
Nail shank diameter : 2.3 - 2.9mm.
Nail spacing : 8mm.
Operating Pressure : 70-120 psi / 5 - 8.3 bar
Adjustable firing mode and depth
Weight at 3.67kg / 8.07lbs
Cannon Tools Limited • 20 Station Road, Rowley Regis, West Midlands, B65 0JU, United Kingdom
T +44 (0) 121 561 6760