Rethreading - Taps & Dies
CT4003
Glow Plug Thread Repair Kit - 33pc
33pc Glow Plug Thread Repair Kit
Taps : M8 | M10 | M10 | M12 | M12 | M14
Insert Drivers : M8 | M10 | M10 | M12
Tap Guide Pins : 8 x 45 | 10 x 45 | 12 x 45
Thread Inserts : M8 | M10 | M10 | M12
Insert Guide Rod and Knurled Head
For damaged cylinder head glow plug threads.
CT3593
Oil Pan Thread Repair Set - 114pc
114pc Oil Pan Thread Repair Set
Ideal for repairing sump / gearbox and differential drain plug threads.
Used to tap the damaged thread slightly over size
then fit a new drain plug and washer supplied.
Suitable for most cars and light commercial vehicles.
Tap Sizes - M13 x 1.25 to M22 x 1.5mm
CT4795
Wheel Stud Thread Repair Set - 12pc
12pc Tap and Die Set
For re-threading wheel studs / nuts and bolts.
Special holders allow for use with built-in wheel studs
Tap / Die Sizes : M12 x 1.25 | M12 x 1.50 | M14 x 1.50
with Tap Holders / Die Stocks / L-type Hex wrench and Thread gauge
0.5 | 0.6 | 0.7 | 0.75 | 0.8 | 0.9 | 1.0 | 1.25 | 1.5 | 1.75 | NPT27 | BSP28
CT4679
Tap Set - 7pc Combined
7pc Combined Drill and Tap Set
with 1/4in. Hex Shank
7pc Combined HSS-G Drill and Tap Cutting Set
6 Combination Drill and Taps with 1/4in. Shanks.
M3 x 0.5 | M4 x 0.7 | M5 x 0.8 | M6 x 1.0 | M8 x 1.25 | M10 x 1.5
For Drilling / De-burring and Threading.
With 1/4in. Hex Magnetic Bit Holder.
HSS 6542.
CT2139
Tap and Die Set - 115pc
115 pc Tap and Die set
48 Tap and Dies in the following sizes
4-40 to 12-24 | 1/4 -20 to 3/4 -16 | 0.4 to 18 x 2.5
1/8NPT27 | 1/8BSP28 | 1/4NPT18 | 1/4BSP19
Tap and Die handles | T Type Wrench
Centre punch and Drills - 2.5 | 3.3 | 4.2 | 5 | 6.8
Screwdriver |Screw Pitch gauges and Screw Extractors
Cannon Tools Limited • 20 Station Road, Rowley Regis, West Midlands, B65 0JU, United Kingdom
T +44 (0) 121 561 6760