3pc Locking Pliers Set
Sheet Metal Clamp - 245mm
Welding Clamp - 225mm
Locking C-Clamp - 275mm
Nickel plated body with thumb screw adjustment

200mm Welding Pliers

Hammer Head Jaws for efficient removal of welding spatter.
Induction hardened cutting edge stays sharp longer.
For drawing out wire and removing tips and nozzles.
Hammer designed for light welding gun maintenance.
Spring loaded with soft grip.

11in. / 280mm Welding Pliers
60mm Wide Jaws
Carbon Steel

Panel Flanging and 5mm Hole Punch Tool
Rotating Head
Prepare Flange
Punch Holes
Spot Weld Through Holes
For Smooth and Level Joints

Welders Chipping Hammer
Cone Shaped Nose with Sharp Point
and Flattened Dual bevelled tail.
Shock reducing spring type handle with hook.
Use to Chip or Cut Welding Slag off Metal.

4pc Sheet Metal Butt Welding Clamp Set
Clamps sheet metal panels edge-to-edge and surface-to-surface.
Clamps flat or curved and pressed ribbed panels.
Simple to use for assembling and fabricating.
Ideal for use when welding patch repairs in floors / wings
door skins or fabricating panels on re-skinning projects.

3in. / 20lb Magnetic Welding Holder
Supports up to 20lb weight
with 60 / 90 120 degree options
Also for soldering / assembly work and pipe installation

3pc Mini Magnetic Welding Aid Kit
Mini Magnetic Welding Ground
With Strong powerful magnets - Pull Force : 9Lbs
Holds work at : 45 | 90 | 135 degree angles.
Ideal for welding, soldering, fabricating and general assembly work etc.

4pc Magnetic Welding Aids
Holds work at : 45 | 90 | 135 degree angles.
Supports up to 10lb weight

3in. / 25lb Magnetic Welding Holder
Supports up to 25lb weight
with 45 / 90 / 135 degree options
Also for soldering / assembly work and pipe installation

4in. / 50lb Magnetic Welding Holder
Supports up to 50lb weight
with 45 / 90 / 135 degree options
Also for soldering / assembly work and pipe installation

5in. / 75lb Magnetic Welding Holder
Supports up to 75lb weight
with 45 / 90 / 135 degree options
Also for soldering / assembly work and pipe installation

Adjustable Angle Welding Magnet
With 360 degree Swivel -
which hold objects at almost any angle.
Size : 63.5 x 85.7mm
Pull Force : 22.7kg

CO2 Regulator Gauge
For MIG and TIG providing accurate regulated gas flow.
Brass regulator body with 2in. Dual gauges for easy reading.
Ideal for commercial / industrial and laboratory applications.
Inlet pressure : 0 - 4500 psi / 0 - 315 bar
Output pressure range : 0 - 10 bar
Flow : 0 - 20 L/min
Threaded inlet : W 21.8
Outlet / tube diameter : 6mm / 1/8in. inner thread.

25ft Twin Welding Hose Reel - 1/4in.
For Industrial and Commercial Applications
Solid Steel Axle and Hose Stop Guard
Smooth Operating Roller Bearing

Inverter MIG / MAG / Flux / MMA
Input Voltage : 230V / 50Hz
No load Voltage : 54V
Rated Input capacity : 5.7kVA
Rated MIG welding current : 40 - 180A
Rated MMA welding current : 40 - 160A
IP code : IP21S
Thermo overload protection.
With MIG / MAG Torch.

IGBT Inverter Welding Machine
MIG / FLUX / TIG / MMA
Input Voltage : 230V / 50Hz
Rated Input capacity : 7kVA
Rated welding current : 40-200A
IP code : IP21S
Thermo overload protection
With MIG Torch / Earth Clamp / Electrode Holder
Welding cable / Mask / Hammer.

Inverter MMA Portable Welding Machine
Voltage : 230V
Frequency : 50Hz
Rated Input : 8.2KVA
No-load Voltage : 65V
Current Range : 10 - 200A
Usable Electrode Diameter : 1.6 - 5.0mm
Rated Duty Cycle : 60 percent at 200A
Protection Class : IP21

Welding Mask / Helmet
With auto darkening filter
Viewing area - 100 x 60mm
Filter size - 114 x 133 x 11mm
Switching time - 1/25000s

Welding Helmet
with auto darkening visor filter
Size : 90 x 45mm
Light states : DIN 4
Dark states : DIN 9 - 13
Light to dark : 1/25000 sec
Dark to Light : 0.4 sec
2 x AAA batteries Supplied
Manual-on / Auto-off after 15 minutes idle time

Fibreglass Welding Blanket
Heavyweight flame-retardant fibreglass blanket with brass grommets.
Provides protection to equipment and work areas from sparks and spatter.
Size : 4 x 6ft | 1220mm x 1830mm
Thickness : 0.6mm
Working temperature : 550 degrees C
Ideal safety equipment if you are doing any type of welding.

Cow Split Leather Welding Gloves
Size : 14in. / 360mm