Diesel Injector Master Kit
Suitable for the removal of Bosch / Delphi /
Denso / Siemens and Pumpe Duse diesel injectors.
1.3kg Slide Hammer with 150mm Shaft.
4kg Slide Hammer with 400mm Shaft and Handle.
With various Male and Female Adaptors.
Pump Duse Injectors Adaptors.
Injector Sockets - 25 | 27 | 29 | 30mm

Pneumatic Injector Removal Tool Set
Air Pressure : 0.5 - 0.8bar provides impact
to disassemble particular tight fuel injectors
with a universal 21 piece adaptor set that cover
Bosch / Delphi / Denso / Siemens CR injectors
which have solenoid coil or screw connections.
M14 | M16 | M18 | M20 | M22 | M8-C | M8-X | M10

Master Injector Extractor Kit with 10 Ton Hydraulic Cylinder
Suitable Diesel Fuel Injectors :
Bosch : M17 x 1.0
Delphi : M14 x 1.5 Delphi
Toyota : M16 x 1.0 Toyota
Denso : M20 x 1.0
Siemens : M25 x 1.0 / M27 x 1.0
Can be used in-situ saving time and expense.
Main side and top bars allow for various engine configurations.

Diesel Injector Extractor Set
With adaptors and Slide Hammers -
1.6kg | 2.7kg | 5.1kg
Pulling Claws with fork opening.
5 slotted 6 point 1/2in.Dr sockets -
25 | 27 | 28 | 29 | 30mm x 100mm
Injector extractor sleeve with shells.
M27 Pulling adaptors.

Fuel Injector Removal / Installation Tool Kit
for BMW MINI Petrol Engines B38 / B48
For extracting or fitting plastic bodied petrol injectors
used on some BMW and MINI engines also reducing
the chance of damage to the injectors while removing them.
OEM Codes : 2358417 | 2358022.

BMW Fuel Injector Service Kit
Bosch and Common Rail injectors
mounted on many BMW vehicles.
No need to dismantling the cylinder head.
Blower adaptor to clean the injector seats.
M16 - M17 forcing screw | support feet
Hex wrench to remove solenoids
29mm injector socket with 1/2in.Dr

29mm Fuel Injector Socket
1/2in.Dr
for BMW Common Rail Injectors
Replacement socket for CT3617

Diesel Injector Removal Hydraulic Upgrade Kit
Providing 17 Ton Hydraulic force for diesel injector removers allowing
the controlled extraction of very tight fitting or struck injector nozzles.
Can be used in conjunction with CT3617
Hydraulic Cylinder with M16 x 1.5 Nut and Spacer Ring.
Pull Spindles M14 x 1.5 external thread - 240 / 315mm
Pull Spindles M17 x 1.0 internal thread - 240 / 315mm
Pull Spindle M18 x 1.5 internal thread - 250mm
Pull Spindle M25 x 1.0 internal thread - 240mm

Petrol Injector Extractor Set
For BMW N54 / N63 and Mini N14 / N18
Designed to remove injectors and re-install the Teflon seals.
Includes : Slide-Hammer and Adaptor
70mm Short Bolt | 120mm Long Bolt
Tapered Cone and Small / Medium and Large Diameter Sleeves.

Fuel Injector Service Tool
For the removal and installation of high pressure injectors
with hold down top found in the BMW N20 and N55 series engine.
Coated steel and anodised aluminium
OEM Code : 130320

Petrol Injector Remover with Slide Hammer
for BMW N43 | N53 | N54 models
Access directly below injector and held by thumbscrew
Suitable for BMW : 1 | 3 | 5 | 6 | 7 series
OEM Code : 130180

BMW Fuel Injector Service Tool Kit
Designed to install and remove high pressure injectors
also injectors with hold down tops found in BMW N series engines.
Applicable to : BMW N20 | N47| N54 | N55 | N57 | N63 models.
OEM reference : 130180 / 130270 / 130320

Diesel Injector Puller with Adaptor
Aids Removal of Bosch and Lucas Diesel Injectors
M8 | M12 | M14 Adaptors

Petrol Injector Puller for Ford Vehicles
For removing Bosch GDI Injectors
on all standard Ford EcoBoost petrol engines 1.0 - 3.7 litre capacity.
Extracts petrol injectors easily without damaging the injector or head.
Includes slide hammer and specially designed injector claw.
OEM Code : 310-206

Fuel Injector Puller Set
for Alfa Romeo / Fiat / Ford / Iveco / Opel / PSA / Suzuki
1.3 / 1.6 / 1.9 / 2.0 - 16 Valve Engines - Also 2.3 and 3.0 models
Specifically designed for the removal of extremely seized injectors.
With the application-specific extractor -
the injectors can be removed either hydraulically or mechanically.

Kia / Hyundai Injector Remover Kit
For removing injectors from most Korean vehicles -

Kia : Carnival | Rio | Careens | Cerato | Optima
Picanto | Sorrento | Sportage | Grand Carnival.

Hyundai : Starex | Lavita | Matrix | Trajet | Terracan
Santa FE / SM | Libero | Avante XD | Tucson |
Grandeur XD Getz | NF Sonata | Accent / 06

Diesel Fuel Injector Puller
with Injector Cap removal socket and Security Hex Key
Specially designed for the removal of stubborn diesel injectors on Mercedes CDI engines.
Designed to remove the injector without damaging the cam cover.
For C-Class / E-Class and Sprinter Vehicles

4pc Injector Puller Set
for Mercedes CDI Engines
10mm Hex Bit with integral 1/2in.Dr socket
29mm Slotted Injector Socket with 1/2in.Dr or use with 22mm spanner
Pulling spindle : 34mm dia with 20mm Slot
Protection Rings
Ideal for removal and installing tightly fit common rail injectors
as found on Mercedes CDI 611 / 612 and 613 engines.

6pc Injector Puller Set
for Mercedes CDI engines
For removing common rail injectors
without having to disassemble cylinder head.
Applicable to Mercedes-Benz
CDI engines 611 | 612 | 613 etc.
Injection puller with impact hammer.

Diesel Injector Puller
For Citroen / Peugeot 2.0 / 2.2HD1 injectors.
With Pulling Bridge and 3 Bridge Legs
Injector Sockets : 25mm | 29mm Diameter
Injector Force Screw Threads :
17mm Male x 1mm Pitch
25mm x 1mm Pitch
Security Hex Key : 10mm

Injector Removal Extraction Tool Kit
Designed to remove the injectors on Renault Trafic 2.0 DCI M9R Engines.
Also used in Nissan vehicles and Vauxhall Vivaro.
Includes 2 Force Screws :
M14 x 1.5mm Female Force Screw for Piezo Injector
M17 x 1.0mm Male for Solenoid type Injectors.

7pc Injection Puller Set - VAG TDI
For quick and precise extraction of Injection Nozzles from Diesel Engines
Suitable for Audi - VW diesel vehicles - SDI / TDI / PD

Injector Nozzle Puller - Volvo HGV
Designed to aid extraction of the unit-injectors from Volvo HGV engines.
Ideal where the unit pump has overheated and stuck in the cylinder head.
Applicable to :
Volvo trucks - FM12 | FM440 | FH500
Volvo Penta marine engines - D9 | D12 | D16.
Includes slide hammer and
Puller Attachment Clamp to keep the assembly in place.

Diesel Injector Puller Set
With Special 1/2in.Dr Hex Bits
Suitable for the fast and reliable removal of
Bosch | Delphi | Deso and Siemens Diesel Injectors.

Fuel Pump Removal Tool
for BMW X1 | X3 N47 2.0 Diesel Engines
Applicable to :
1 Series : E81 | 82 | 87 | 88
3 Series : E90 | 91 | 92 | 93
5 Series : E60 | 61
X1 and X3 : E83
and all chain driven engines.
OEM Code : 118740

BMW Injection Pump Wheel Assembly Tool
For Holding the sprocket during assembly of the injection pump.
Suitable for BMW engines : M47 | M47T2 | M47TU | M57 | M57TU

Mercedes Diesel Fuel Injection Pump Socket
33 point Spline | 1/2in.Dr | 56mm Long
For injection pumps on Mercedes-Benz
601 | 602 | 603 | 605 | 606 | 615 | 616 | 617
Also fits many early 250 and 300 models
with in-line fuel pumps.

Mercedes Diesel Pump Locking Pin
For locking Bosch inline Diesel pumps in mounting position.
Applicable to Mercedes - 200 / 250 / 300D - TD
OEM Code : 601589052 00

Fuel Pump Sprocket Puller
for Ford Transit 2.2L TDCi
From 2011 fuel pump sprockets no longer have threaded holes fitted in them
this tool allows the pump removal without removing the timing chain.
Applicable to : Ford Transit from 2011 with 2.2L TDCi Puma engine.
Also Land Rover Defender 2.2L TD4 / 2001 - 2015
OEM Codes : 303-249 | 303-249/01

5pc Fuel Pump Water Drain Valve Plugs
For Ford 6.7 | 6.7L Diesel HFCM
Ford Truck / Pickup 2017-2022
F250 / F350 / F450 / F550 Super Duty 6.7L V8 Diesel Engines.
Easy Installation.
OEM Code : HC3Z-9J305-A

Fuel Injection Pump Sprocket Tool
For high pressure fuel pump sprockets fitted to
Hyundai and Kia 2.0 | 2.2 CRDi diesel engines.
Allows the fuel pump sprocket to be pulled from the pump.
OEM Code : 09331-1M100.

VAG Diesel Pump Sprocket Puller
15mm Hex Drive with 24mm Hex Retainer.
For removing the high pressure fuel pump on 1.4 | 1.6 | 2.0L TDi engines.
Applicable to VW and SEAT vehicles from 2008 - 2013.
OEM Code : T10489.

CDI Diesel Fuel Injection Pump Puller
Small puller body to fit transverse engines on
Vauxhall / Opel and Land Rover Free Lander and Rover 75 models
with TD4 and M47 2.0 engines where space is at a premium.

2pc Injection Pump Socket Set
3 Point - 7 and 12.6mm
For the triangular screw on the quantity adjuster top cover.
Suitable for Bosch common rail
and TDi injection Pumps

Diesel Injector Pump Timing Set
For the accurate adjustment of different fuel injection pumps i.e
Bosch | VE | Kikki | Lucas | CAV-Roto | Nippondenso

7pc Diesel Fuel Injection Pump Timing Set
Audi | Ford | Seat | Skoda | Volkswagen
with Dial Indicator Gauge
Dial Button Extension
Dial Indicator Adapter
Injection pump locking pin / One-piece impeller
Injection pump locking pin / Two-piece impeller

4pc 3/8 and 1/2in.Dr Socket Set
for Specific Triangular Nut Profile
Sizes : 6.5 | 7.5 | 13 | 26mm
Special sockets for triangular head bolts
necessary for TDI diesel pump internal repairs.
Chrome Molybdenum

Fuel Injector Gasket Puller
For the removal of the copper ring gasket on fuel injectors
230mm Long
Suitable for most Common Rail Diesel Engines

Fuel Injector Gasket / Seal Puller
For the extraction of fuel injector copper washers.
Slim shaft with threaded conical tip and slide hammer.

370mm Heavy Duty Injector Gasket Puller
with 840g Slide Hammer
For extracting burnt in copper seal washers from the injector shaft.
4 - 16mm Internal Diameter Seal Rings.
Helps to avoid damages to the cylinder heads.
Applicable to : BMW / Mercedes-Benz / PSA models.

Injector Cleaner and Tester
plus Petrol Fuel System Tester
Multi-Function Non-Dismantle Injector Throttle and Fuel System Kit
with a range of adapters to cover most makes and models of vehicles.
Provides high and low pressure cleaning of combustion chamber fuel system
plus throttle valve and fuel nozzle cleaning ability.

7pc Diesel Injector Seat Cutter Set
High quality material - skd11 provide easy clean work.
Various cutters are available for nearly all diesel cars.

17pc Diesel Injector Seat Cleaning Set
Reamer Sizes : 14 | 15 | 17 | 19mm
For efficient cleaning of injector ports and seating
before changing or when reconditioning diesel injectors.
Helps to avoid blow-back due to poorly seated injectors.
Suitable for most vehicles
With Reamers for a wide range of vehicles

Universal Injector Seat Cleaning Set
For cleaning diesel injector seats prior to fitting new injectors.
Silicone Nylon brushes 15 and 20mm.
Steel wire brushes 18 | 22 | 25mm.
Steel wire injector nozzle port cleaner.
224mm long Bit

Diesel Injector Seat Cleaning Set
For efficient cleaning of injector ports and seating
before changing or when reconditioning diesel injectors.
Helps to avoid blow-back due to poorly seated injectors.
Suitable for most vehicles
With Cleaning Brushes
Injector Seat Cutters and Guide
Seal Puller

Injector Seat and Shaft Cleaning Kit
Used to remove rust / carbon and other debris
and efficient cleaning of injector seats and shafts on diesel engines.
Suitable for a wide range of vehicles and engines.
With Wire Brushes : 25.1 | 29.5 | 30.2 | 34.9mm
2 Stage Wire Brushes : 12.1 | 19.1 | 25.4mm
Bore Wire Brushes : 8 | 10 | 12 | 15 | 17 | 19mm
Brush Handle and Rigid Extension with quick couplers
Flexible Extension with fixing screw - 1/4in. Hex Drive
Cleaning Swab Assortment : 5 - 16mm
Used to remove rust / carbon and other debris.

3pc Diesel Injector Bore & Sleeve Cleaning Kit
Long Spiral Tube Brush :
290mm Long with 150mm bristles up to 35mm diameter
Spiral Tube Brush :
275mm Long with 80mm bristles up to 35mm diameter
Flat Bottom Brush :
260mm Long with 50mm bristles / 17mm diameter
With durable galvanized shaft and polypropylene handles

6pc Wire Brush Set
153mm Stainless Steel Brushes -
Diameter : 13 | 19 | 25 | 31 | 41 | 50mm.
Suitable for cleaning and removing rust and debris
from the internal surfaces of engine components -
Pipes / Tubes and Bores etc.

8pc Common Rail Diesel Injector Repair Kit
For repairing common rail diesel injectors Bosch / Siemens and Denso.
Set comes with all necessary sockets to open up defective injectors :
Injector ball valve lapping tools
Hex Bits : 6.6mm | 7.6mm
Denso common rail injector valve seat removal tool
8 Sided socket for Bosch common rail injectors
Inside fixing removal tool for Siemens common rail injectors.

10pc Injector Clamping Bolt Thread Repair Set for Mercedes-Benz
Suitable for reaming the broken-off expansion bolt
and repairing the M6 thread in the cylinder head.
No need to remove the cylinder head or valve covers.
Drill : 6mm and Step Drill : 7 to 8 mm with adjustable depth ring.
Guide Sleeve for 6 mm twist drill
Tap : M8 x 1.0mm and Assembly tool for threaded inserts
5 threaded inserts : M6 x 1 inner thread / M8 x 1 outer thread.