5pc Ball Joint and Tie Rod Separator Set
Automotive front-end service set for removal of most types of Pitman Arms

5pc Ball Joint and Tie Rod Separator Set
For separating most pitman arms / tie rods and ball joints
Found on a automotive and light truck vehicles.
With separators for late model Ford and GM pickups.
Sizes : 11/16in | 15/16in. | 1-1/8in. | 1-7/16in. | 1-5/8in.
Sizes : 19mm | 24mm | 30mm | 37mm | 42mm

5pc Ball Joint and Tie Rod Separator Set
Fork Type Track Rod Tool Kit
200mm Handle for use with a regular hammer
Handle with 0.401in. Shank for use with an air impact hammer

Ball Joint Separator - Jaw size 15/16in.
Knurled shaft for better grip
Drop forged steel construction

Univesal Ball Joint Puller
For all types of vehicles
20mm Jaw opening adjustable up to 50mm

Ball Joint Separator
Scissor Type
Reach - 20 - 40mm
Opening - 19mm

Ball Joint Separator
Scissor Type
Reach - 20 - 50mm
Opening - 19mm

Scissor Ball Joint Separator / Economy

Hydraulic Ball Joint Splitter
Forged steel body ball joint splitter suitable for light commercial vehicles.
Use manually or with 1.5 Tonne hydraulic ram supplied.
Features a step down thread adaptor that allows fitting of the manual force screw.
Jaw Opening : 22mm

2-way Hydraulic Ball Joint Separator Kit
Specially designed to be operated manually or by 12 Tonne hydraulic ram.
Also for splitting Track Rod ends and Anti-roll Bar Mountings
Jaw Opening - 30 . 34 . 40 mm
Thrust Screw Lengths - 80 . 100mm
Pivot Rod Length - 125 mm.

With Interchangeable Heads
A robust and adaptable service kit for most ball joints
Jaw Sizes - 20 / 22 / 24 / 27 30mm
Thrust Screw Length - 100mm
Pivot Rod Length - 125mm

3pc Ball Joint Removal Set
Low profile set suitable for most vehicles.
Features forged steel body and hardened screw with thrust ball.
23mm | 28mm | 34mm for various vehicles.

Size - 19 - 22mm

14pc Master Set Ball Joint Adaptor Kit
For use on all cars and light trucks that have press-fit type ball joints
Installation and Removal Adaptors
Installation and Removal Cups
Receiving Tubes
For use with C-Frame Press / NOT included

Audi / VW Ball Joint Tool
for holding the lower ball joint
when removing and installing on
Audi A4 | A5 | A6 | A7 | Q5

Ball Joint Remover / Installer for BMW 3 Series
For Press-Fit Control Arm Ball Joints on BMW 3 Series Vehicles
Use without Removing the Control Arm from the Vehicle
Simple / Easy Hydraulic Ram Action

BMW Ball Joint Tool
For installing / removing the ball joints on
BMW 3 Series - E36 models
Exchangeable yokes for multi-purpose use
Can also be used for hydro and plastic bushings

Mercedes Ball Joint and Bushings Separator
Removes the upper and lower ball joints on Mercedes Benz vehicles
185mm compression spindle with 24mm Hex Drive
40 and 54mm Compression heads
22 / 33 and 57mm Pressure pads
Works on press-fit upper and lower ball joints.
C- Frame can be used to remove and install universal joints.

Mercedes Ball Joint Separator
Removes the upper and lower ball joints on Mercedes Benz models vehicles.
160mm compression spindle with 24mm Hex Drive
Works on press-fit upper and lower ball joints.
C- Frame will remove and install universal joints.

10pc Ball Joint Separator Tool Kit
Ball Joint Installation and Removal kit for
Mercedes Benz ML3650 | S500 | E320 | E500
With forged carbon steel C-frame Press.
Front and Rear suspension ball joint press adaptors
and 3/4in.Dr 4 prong Ball joint socket

21pc Master Adaptor Set Ball Joint Service Kit
For use on all cars and light trucks that have press-fit type ball joints
C-Frame | Forcing Screw | Installation Adaptor | Removal Adaptor
Installation and Removal Cups
Receiving Tubes

9pc Ball Joint Service Kit with 4 Wheel Drive Adaptors
For use on all cars and light trucks that have press-fit type ball joints
C-Frame | Forcing Screw | Installation Adaptor | Removal Adaptor
Installation and Removal Cups
Receiving Tubes

Large C-Frame Ball Joint Separator
For cars and light trucks with press-fit type ball joints.
Separates tie rod ends and compact car ball joints.
Powerful lever action breaks loose stubborn joints.
Eliminates broken grease reservoirs.
No need for excessive hammering.

Mercedes M-Class Ball Joint Pin Socket
3/4in.Dr / 4 Pin
For ML-class W163 < 2005 and W164 2005 <
For servicing the front and rear axle suspension ball joints.
Loosen and tighten counter nuts on suspension joints with correct torque.

2pc Lower Ball Joint Pin Socket Set
for Castellated Lock Nuts with
51mm and 60mm Outer Diameters
Will need : 35 and 38mm Socket or Spanner
Applicable to :
Peugeot ; 405 | 406 | 407 | 605 | 607
Citroen : Xantia - C5 | C6
Suitable for removal of OEM
and after market lower ball joints.

11pc Special Socket Set
for Castellated Lock Nuts
1/2in.Dr Sizes : 22 - 75mm
4 Tooth Sockets for removing castellated lock nuts
found on ball joints / axles and other applications.