9pc Panel Beating Kit / Auto Body Repair Set
Drop-forged Steel Dollies and Spoons.
4 Hammers : Bumping | Skinning | Pein & Pick / Finish
with Professional Hickory Handles.
3 Dollies : Toe | Universal | Heel.
2 Spoons : Dinging | Surfacing.
Use on flat and curved surfaces.
Hammer Heads and Dollies made from 1055 medium carbon steel
Natural Hickory Wood Shafts

50 Ton Hydraulic Shop Press
Floor Standing Heavy Duty H-Frame Construction
Capacity : 50 Tons
Working Range : 0 - 1000mm
Ram Stroke : 185mm
Air Pressure : 110 - 120psi
Air Inlet : 1/4in. NPT
Ideal for straightening / Bending and Stamping.

10kg Anvil

20kg Anvil

50kg Anvil

100kg Anvil

3pc Pry Bar Set
Sizes : 12 | 17 | 24in. / 300 | 430 | 600mm
Solid Plastic Handles with Hammer Cap
Drop forged and heat treated steel shafts for strength

5pc Pry Bar Set with Hi-Vis Handles
Set includes Roll Head Bar
4 Pry Bars :
6 x 200mm | 9 x 300mm | 11 x 460mm | 12 x 600mm.
Sizes : 8 / 12 / 16 / 18 / 24in.

4pc Nut Splitter Set
Sizes : 9 - 12mm | 12 - 16mm | 16 - 22mm | 22 - 27mm

5pc Go Through Stud Extractor Set
Sizes : 6 | 8 | 10 | 12mm
with 19 / 21mm Ratchet Spanner

5pc 1/2in.Dr Twist Socket Set
Socket sizes : 17 |19 | 21 | 22 x 150mm long
Punch Bar : 12mm Diameter x 150mm long
For removing deformed or damaged nuts

27pc Multi-Spline Bolt & Screw Extractor Set
For the removal of damaged screws and bolts
Suitable for all screw head drive types
Sizes: 3 to 23mm
Also : 1/8 to 7/8in.
With 1/4in Hex Shank 3/8in.Dr Adaptor
and 1/2in. to 3/8inDr Adaptor.

40pc Tap and Die Set
Tap and Dies in the following sizes :
M3 x 0.5 | M3 x 0.6 | M4 x 0.7 | M4 x 0.75 | M5 x 0.8 | M5 x 0.9
M6 x 0.75 | M6 x 1.0 | M7 x 0.75 | M7 x 1.0 | M8 x 1.0 | M8 x 1.25
M10 x 1.25 | M10 x 1.5 | M12 x 1.5 | M12 x 1.75 | 1/8in. x 27NPT
Die Wrench | Tap Wrench : M3-12 | T-Type Wrench
Screwdriver and Pitch Gauge

25 Thread Inserts
Helicoil Type : M6 x 1.0mm

25 Thread Inserts
Helicoil Type : M8 x 1.25mm

10 Thread Inserts
Helicoil Type : M12 x 1.75mm

14in. / 355mm Bolt Cropper

18in. / 460mm Bolt Cropper

24in. / 600mm Bolt Cropper

30in. / 760mm Bolt Cropper

36in. / 915mm Bolt Cropper

Universal Lock-out Tool Set
For Professional Use Only
Thin Bar
NOTE - This set is sold on the provision that it is used Lawfully

Professional Soldering Set
Anti-flare works at any angle and wind resistant.
7 functions with multiple accessories.
Built-in stand for safe operation.
Gas Capacity : 5ml
Temperature Soldering Tip : 350 degrees C
Temperature Hot Blow Tip : 650 degrees C
Temperature Blow Torch Tip : 1150 degrees C
For Soldering / Heating / Heat Shrinking and Paint removal

Heavy Duty Soldering Clamp
with 90mm Magnifying Glass
An Indispensable aid for hobbyists or professionals doing soldering work
Features adjustable joints for versatile movement in all directions
Strong crocodile clips that hold work secure
Heavy cast iron base for added stability
Distortion free magnifying glass

LED Head Torch
Max. Output : 220LM
Rotation Focusing with 90 degree Adjustment.
Rear LED Warning Light.
Waterproof Rubber Switch
Modes : High / Low / Flash / SOS
Rechargeable Batteries : 2 x 18650
4 hours charging with approx. 3.5 hours work time.
Supplied USB Charging Cable

LED Handheld Work Light
Bulb : COB LED
Battery :3.7V 1800mAh Li-ion Battery with USB Charge
Function : Full Power / Half Power / Flash / OFF
Max Output : Full - 360 Lumens / Half - 180 Lumens
Run Time : 3hrs / 8hrs
Magnetic Back with Integral Hook
Waterproof : IPX4

Cordless LED Work Light
30 LEDs producing 200Lm
Integral Battery : 2Ah Li-ion
Charger : 100 - 230V
Magnetic Base and Hook

Rotating Magnetic LED Work Light
Strong ABS Housing and Aluminium Light Strip rotates up to 270 degrees.
With Swivel Magnetic Arms and Hanging Hooks.
Light Settings : High - 750Lm | Low - 375Lm / off
Run Time : 2.5 hours / high power | 5 hours / low power.
Battery : 3.7V / 4000mAh Li-ion.
Charging time : 5 - 6 hours.
Overcharge and overcharge protection.

230V Cable Reel - 25M
13 Amp UK 3 Pin Plug with 2 Sockets
Rubber Grip Handle with flexible easy wind cable.

Trailing Socket Lead
with 16A Plug to 230V UK Socket

13Hp Petrol Generator
Rated Output : 5.0KW
Max. Output : 5.5KW
Displacement : 389cc
Fuel Capacity : 25 litres
Continuous Operation Time : 10H
Oil Capacity : 1.1L
Electric Start with 12V / 17A Battery

8KW Silent Diesel Generator - Single Phase
Rated / Max. Power : 8KW / 8.5KW
Rated Voltage : 230V
Rated Frequency : 50Hz
Rated Current : 34.7A
DC Output : 12V / 8.3A
Power Factor : 1.0
Displacement : 667cc
Fuel Tank Capacity : 28L
Rated Class : IP23M

8KW Silent Diesel Generator 3 Phase
Rated / Max. Power : 8KW / 8.5KW
Rated / Voltage : 230V / 400V
Rated Frequency : 50Hz
Rated current : 8.5 / 11.5A
DC Output : 12V / 8.3A
Power Factor : 0.8
Displacement : 667cc
Fuel Tank Capacity : 28L
Rated class : IP23

10Hp Diesel Generator / 3 Phase
Rated / Max. Power : 4.5Kw / 5Kw
AC Output : 400V / 230V / 50Hz
DC Output : 12V / 8.3A
Power Factor : 0.8 cosf
Displacement : 406cc
Fuel Tank Capacity : 16L
Net / Gross Weight : 148kg / 159.5kg
Measurements : 94.5 x 55 x 70cm

10Hp Diesel Generator / Single Phase
Rated / Max. Power : 4.5Kw / 5Kw
AC Output : 115V / 230V / 50Hz
DC Output : 12V / 8.3A
Power Factor : 1.0 cosf
Displacement : 406cc
Fuel Tank Capacity : 16L
Net / Gross Weight : 148kg / 159.5kg
Measurements : 94.5 x 55 x 70cm

Bench Drill / Drill Press
Motor : 230V / 550W / 50Hz
Spindle Speed : 16 speed
Motor No-load Speed : 1420rpm
Chuck : B16 / 3 - 16mm
Spindle Taper : MT2
Max. Drilling Depth : 80mm
Table Size : 290mm
Overall Height : 980mm

HSS Step Drill
Sizes : 4 | 6 | 9 | 12 | 15 | 18 | 21 | 24 | 27 | 30 | 33 | 36 | 39 | 42mm
Ideal for cutting holes in metal and other materials.

13pc Flat Wood Drill Set
Sizes : 6 | 8 | 10 | 12 | 13 | 14 | 16 | 18 | 19 | 20 | 22 | 24 | 25mm
with 6mm Hex Shank

Biscuit Jointer - 100mm
Power / Voltage : 900W / 230V / 50Hz
No load speed : 10800rpm
TCT Blade : 100mm Diameter with 6 Teeth
Max. Material Thickness : 0 - 30mm
For Biscuit Sizes : 0 | 10 | 20
Fine Depth Adjustment : 3 | 10 | 12.3 | 19mm
Fence Angle Setting : 0 - 90 / 90 - 135 degrees
With dust collection bag / hex key and spare carbon brush.

110V Angle Grinder - 115mm
Input Power : 750W
Frequency : 50 / 60Hz
No-load speed : 11000rpm
Disc diameter : 4.5in. / 115mm

20 Metal Cutting Discs - 115mm
For cutting only - not for side grinding
3.2 Thick
Bore : 22mm
Max 13300rpm 80m/s
NOTE : priced per pack

115mm Diamond Cutting Disc Set - 3pc
Continuous Rim / Segmented and Turbo Discs
Cutting Depth : 30mm
Bore size : 22.2mm
Speed : 13000rpm
General Purpose - EN13236

300mm Segmented Diamond Cutting Disc
Cutting Depth : 100mm
Bore size : 20mm
Max. Speed : 6300rpm
General Purpose - EN13236

350mm Laser Welded Diamond Cutting Disc
Cutting Depth : 120mm
Bore size : 25.4mm
Speed : 5400rpm
All Purpose

Electric Drill Bit Sharpener
Sizes : 3 - 10mm
230V / 50Hz / 70W
No Load Speed - 3000rpm
For Carbon Steel and HSS drill bits.
Provides a razor sharp cutting edge.
Drill guide ensures correct sharpening

Electric Chain Sharpener for Chainsaws
230V / 130W / 50Hz
No-load Speed : 3000rpm
100mm Diameter Grinding Disc.
Chain vice adjusts to any pitch and shape.
Suitable for wall or bench mounting.
Heavy duty steel base with safety guard.

3pc Sharp Head Wire Brush Set
With Nylon / Brass and Steel Bristles.
Sharp head allows for tight spaces and narrow corners.
Ideal for automotive use like paint and corrosion removal
also other detail cleaning jobs.

38pc Mixed Brush Set
1/4in. Hex Shaft
Quick Release Driver and Extension
Brushes : Brass | Nylon | Steel
Diameter : 8 - 19mm in 1mm increments.
For cleaning / de-burring cylinders / bushings and pipes.
1/4in. Extension allows use with power tools.

Oscillating Multi-Tool with Quick Release
Voltage : 230V / 50Hz
Power : 300W
No Load Speed : 1500 - 2100rpm
Oscillation Angle : 3.2 degrees
With Accessories

3 Reciprocating Saw Blades
Carbon Steel for Wood
Carbon Steel for Plastic
Bi-Metal Blade for Steel
Ideal for Neilsen Reciprocating Saw - CT0782