120pc Assortment Box of Hex Head Self Drill Screws
Zinc plated carbon steel with super sharp point
Contains 8 popular sizes :
8 x 12.5 | 8 x16 | 8 x 19 | 8 x 25 | 10 x 10 | 10 x 12.5 | 10 x 20 | 10 x 25mm

Car Wash Mitten 22 x 17 cm
1 side of Chenille noodle for car wash
1 side of towelling micro fibre for polishing.
Suitable for Exterior and Interior use.
Suitable for cars / motorbikes / boats and home use.

230V Hot Air Gun
with Over Heating Protection
Supplied with 4 different Nozzles
Power 2000W
Temperature 300 degrees C / 600 degrees C
Air Flow - 300L/m to 600L/m
Useful for for a variety of decorating applications

Cordless Engraver
Voltage : 3.6V D.C / 600mAh
3 speed : 5000 / 10000/ 15000 min
Charging Voltage : 5V DC via USB
2 hours charging for 90 min. usage.
With Grinding wheels / 2.3mm shank
and Diamond Bits / 2.3mm shank.
Mabuchi motor.

16pc Hex / Star / E-Socket and Bit Set
With 3/4 and 1in. Drive Adaptors plus 4mm Hex Key
Hex Bits : 17 | 19 | 22 | 24mm x 107mm Long
Star Bits : T60 | T70 | T80 | T90 | T100 x 107mm Long
E-Sockets : E18 | E20 | E22 | E24 x 107mm Long
For Truck Cylinder Head Bolts / Wheels and Shock Absorbers etc

5pc Extension Bar Set - 3/8in.Dr
Extra Long
Sizes : 38 | 75 | 150 | 250 | 450mm
Chrome Vanadium

6pc Extension Bar Set - 3/8in.Dr
with Wobble End
Sizes : 38 | 75 | 150 | 200 | 250 | 300mm
Chrome Vanadium

5pc Extension Bar Set - 1/4 | 3/8 | 1/2in.Dr
with Wobble End
Sizes : 50 | 75 | 100 | 150 | 225mm
Chrome Vanadium

6pc Impact Socket Adaptor Set
Square Drive Converters suitable for Air Tools
1/4 F to 3/8 M
3/8 F to 1/4 M
3/8 F to 1/2 M
1/2 F to 3/8 M
1/2 F to 3/4 M
3/4 F to 1/2 M

8pc Impact Adaptor Set
1/4 F x 3/8 M
3/8 F x 1/4 M
3/8 F x 1/2 M
1/2 F x 3/8 M
1/2 F x 3/4 M
3/4 F x 1/2 M
3/4 F x 1 M
1 F x 3/4 M
Chrome Vanadium

9pc Impact Extension Bar Set
1/4in | 3/8in. | 1/2in. Drive
1/4in.Dr : 50 | 100 | 150mm / 2 | 4 | 6in.
3/8in.Dr : 45 | 75 | 150mm / 1-3/4 | 3 | 6in.
1/2in.Dr : 50 | 125 | 250mm / 2 | 5 | 10in.

Exhaust Hanger Pliers
for removing the Rubber Grommets from exhaust mounts
Fits a wide range of vehicles and models
Saves time and energy.
Long rubber dipped handles to avoid hot exhausts.

7pc Compression Test Kit
For checking the compression of single cylinders on Diesel and Petrol engines.
Suitable for most Vehicles and Motorcycles with Adaptors for :
M10 x 1.00 | M12 x 1.25 for motorbikes
M24 x 2 for Diesel Engines
M12 x 1.25 with 7 mm hole for VW Diesel engines
Multi-Valve Engines
M14 x 1.25 and M18 x 1.5
Maximum pressure : 6.8bar or 100psi.

Timing Light with Digital Display
Voltage : 12V / 10W.
Stroke select function.
Test rotation speed and advance angle.
Max Test Angle : 90 degrees
Precision : 0.1 degrees

PVC Tube Cutter
Cutting Diameter 42mm / 1-5/8in.
Ratchet mechanism
For cutting most kinds of plastic

5pc Ball Joint and Tie Rod Separator Set
For separating most pitman arms / tie rods and ball joints
Found on a automotive and light truck vehicles.
With separators for late model Ford and GM pickups.
Sizes : 11/16in | 15/16in. | 1-1/8in. | 1-7/16in. | 1-5/8in.
Sizes : 19mm | 24mm | 30mm | 37mm | 42mm

5pc Ball Joint and Tie Rod Separator Set
Fork Type Track Rod Tool Kit
200mm Handle for use with a regular hammer
Handle with 0.401in. Shank for use with an air impact hammer

17pc Bearing and Bushing Driver Set
For Bearings / Vibration Isolators / Silent Blocks
3 Driver Handles : 113mm | 140mm | 162mm
14 adaptors : ID 10 - 38mm | OD 12 - 42mm
Allows the user to insert wheel bearing race and seals
easily without damaging the race and axle housing.
Fits most standard bushing / wheel bearings.
Simply turn discs over to drive seals.

BMW Rear Axle Bushing Remover and Installation Kit
For removing or installing the rubber mounted ball joint
in the rear axle trailing arm without
removing the rear carrier assembly.
Suitable for use on various BMW models : E36 / E46

Single Cylinder Foot Pump
For Beach Balls to Car Tyres
Pressure Gauge : 0 - 100psi / 0 - 7kg/cm
With Connectors for small inflatable items.
Rubber foot plate for sure grip.
With 500mm hose

Twin Cylinder Foot Pump
For Beach Balls to Car Tyres
Pressure Gauge : 0 - 100psi / 0 - 7kg/cm
With Connectors for small inflatable items.
Rubber foot plate for sure grip.
With 500mm hose

6 Drawer Roller Cabinet with 155pc Tool Set
Sockets : 1/4 | 3/8 | 1/2in.Drive plus accessories -
Ratchets / Extension Bars / Sliding T-Bars / Universal Joints.
Pliers / Locking pliers / Water Pump Pliers.
Screwdrivers / Screwdriver Bits / Hex Keys.
Ratchet Spanners : 8 - 22mm

7 Drawer Roller Cabinet with Tools
1/4in.Dr Sockets : 4 - 14mm
3/8in.Dr Sockets : 8 - 19mm
1/2in.Dr Sockets : 10 - 32mm
Universal Joints | Reversible Ratchets | Extension Bars
Spanner Sets : 6 - 27mm
Screwdrivers | T-Handle Drivers | Socket Bits and Bit Adaptor
Pliers | Hammer | Parallel Pin Punches

Panel Flanging and 5mm Hole Punch Tool
Rotating Head
Prepare Flange
Punch Holes
Spot Weld Through Holes
For Smooth and Level Joints

8in. / 200mm Mini Bolt Cropper
Cutting Capacity : 3mm approx.
Suitable for Piano Wire / Small Nails and Rivets etc.

Mini Suction Cup
60mm diameter
ABS with Rubber Suction Pad

LED Head Torch
3 Watt Super Bright CREE LED
Max. Output : 800LM
With Zoom Focus Spot to Flood Beam
and flashing light mode
2 x 18650 Rechargeable Batteries and USB Cable included

6.5HP Petrol Generator
4-stroke single cylinder air cooled engine with
Electric Ignition or Recoil Start and Oil Alert System
Rated Voltage : 115V / 230V
Frequency : 50Hz
Rated Output : 2.0KW - approx
Max. Output : 2.2KW - S2.2min
Engine : 196cc / 6.5HP
Fuel Capacity : 13L

Bench Grinder - 150W
230V / 50Hz
Power - 150W
No-load Speed - 2950rpm
Grinding Wheel - 150mm

3pc Diamond Stone Set
Size : 2 x 6in. / 50 x 150mm
with Coarse / Medium and Fine abrasive grades
No need for oil lubricant - just water.

Compound Mitre Saw - 230V / 10in.
With laser Guidance
Voltage : 230 - 240V / 50Hz
Rated Input : 1800W
No load speed : 5000rpm
Blade diameter : 255mm / 10in

Mini Scroll Saw
Input Power : 75W
Voltage : 230V
Frequency : 50Hz
No load speed : 1000 - 4500rpm
Cutting Angle : 0 - 45 degrees
Cutting capacity : 3mm for metal / 12mm for wood
Ideal for intricate scroll cuts

230V Orbital Sander
Rated power : 450W
No load speed : 6000 - 12000rpm
Sheet diameter : 125mm
Dust collection box design
Jug handle with Palm grip
for increased control when sanding.

230V Finishing Sander
Pad size : 90 x 187mm
Voltage : 230V
Frequency : 50Hz
Rated Power : 220W
No load speed : 6000 - 11000r/min
Adjustable Speed Control
Supplied with 1 sand paper starter

Nail / Tack Lifter
6 x 100mm

230V Electric Water Pump for Dirty water
400W Motor / 50Hz / 10M Cable
Max Delivery Height 8M
Max Submersion Depth 5M
Max Delivery Capacity 120 L/pm

Portable Pressure Washer
Rated Power : 230V / 1400W / 50Hz
Rated Pressure : 8 MPa
Max. Pressure : 11 MPa Max. Inlet Pressure : 1.2 MPa
Rated Flow : 5.5 L/m
Max. Water Temperature : 50 degrees
With Hose and Spary Gun

5M / 16ft Tape Measure / 19mm Blade
Dual Scale Metric and Imperial
with Tape Lock and Tape Hold Button
ABS case and Belt Clip

7.5M / 25ft Tape Measure / 25mm Blade
Dual Scale Metric and Imperial
with Tape Lock and Tape Hold Button
ABS case and Belt Clip

7.5M / 25ft with 25mm Blade
ABS Case with belt clip
Dual scale tape
Yellow for High Visibility

10M / 33ft with 25mm Blade
ABS Case with belt clip
Dual scale tape
Yellow for High Visibility

5M / 16ft Tape Measure
with 19mm Wide Blade
Chrome Body

8M / 26ft Tape Measure
25mm Extra Wide Blade
Metric and Imperial increments
with Thumb lock and Belt Clip

4pc Wood Chisel Set
Sizes : 6 | 12 | 19 | 25mm
Precision Ground Blades
Impact Resistant Plastic Handles
Drop Forged Heat Treated Blades

95mm Locking Knife
Stainless Steel
Serrated Blade
Pocket clip

Retractable Utility Knife
Supplied with Blade

10 Pocket Professional Tool Pouch
Oil Tanned Leather
4 Large Pockets
2 Nail Pockets
4 Screwdriver Pockets
2 Hammer Loops
Belt Loop for 65mm wide belt

Electric Weed Killer
Destroys weeds by heating within 5 seconds with no chemicals
Detachable handle for easy storage.
2 Temperature settings with over heating protection.
Concentration Nozzle for weed control
Maybe used for lighting Bar-B-Qs.

7.0hp Petrol Rotovator
Engine Type : 4 stroke OHV
Displacement : 212cc
Rated Engine Power : 4.0kW / 3600/min
Cutting Depth : 100mm approx
Cutting Width : 620mm
Driving mode Gear
Suitable for greenhouses and dry land operation of -
crops / vegetable fields / orchards / gardens and mountainous areas.