70Kw Industrial Direct Diesel Heater
Rated Voltage : 230V / 50Hz
Rated Input : 430W
Maximum Heat Output : 70kW
Tank Capacity : 69L
Air Flow : 1300 cubic metres per hour
Fuel Consumption : 5.4kg/h
Pressure : 10.5Bar

3in. / 20lb Magnetic Welding Holder
Supports up to 20lb weight
with 60 / 90 120 degree options
Also for soldering / assembly work and pipe installation

3pc Mini Magnetic Welding Aid Kit
Mini Magnetic Welding Ground
With Strong powerful magnets - Pull Force : 9Lbs
Holds work at : 45 | 90 | 135 degree angles.
Ideal for welding, soldering, fabricating and general assembly work etc.

4pc Magnetic Welding Aids
Holds work at : 45 | 90 | 135 degree angles.
Supports up to 10lb weight

3in. / 25lb Magnetic Welding Holder
Supports up to 25lb weight
with 45 / 90 / 135 degree options
Also for soldering / assembly work and pipe installation

4in. / 50lb Magnetic Welding Holder
Supports up to 50lb weight
with 45 / 90 / 135 degree options
Also for soldering / assembly work and pipe installation

5in. / 75lb Magnetic Welding Holder
Supports up to 75lb weight
with 45 / 90 / 135 degree options
Also for soldering / assembly work and pipe installation

Adjustable Angle Welding Magnet
With 360 degree Swivel -
which hold objects at almost any angle.
Size : 63.5 x 85.7mm
Pull Force : 22.7kg

CO2 Regulator Gauge
For MIG and TIG providing accurate regulated gas flow.
Brass regulator body with 2in. Dual gauges for easy reading.
Ideal for commercial / industrial and laboratory applications.
Inlet pressure : 0 - 4500 psi / 0 - 315 bar
Output pressure range : 0 - 10 bar
Flow : 0 - 20 L/min
Threaded inlet : W 21.8
Outlet / tube diameter : 6mm / 1/8in. inner thread.

25ft Twin Welding Hose Reel - 1/4in.
For Industrial and Commercial Applications
Solid Steel Axle and Hose Stop Guard
Smooth Operating Roller Bearing

Inverter MIG / MAG / Flux / MMA
Input Voltage : 230V / 50Hz
No load Voltage : 54V
Rated Input capacity : 5.7kVA
Rated MIG welding current : 40 - 180A
Rated MMA welding current : 40 - 160A
IP code : IP21S
Thermo overload protection.
With MIG / MAG Torch.

IGBT Inverter Welding Machine
MIG / FLUX / TIG / MMA
Input Voltage : 230V / 50Hz
Rated Input capacity : 7kVA
Rated welding current : 40-200A
IP code : IP21S
Thermo overload protection
With MIG Torch / Earth Clamp / Electrode Holder
Welding cable / Mask / Hammer.

Inverter MMA Portable Welding Machine
Voltage : 230V
Frequency : 50Hz
Rated Input : 8.2KVA
No-load Voltage : 65V
Current Range : 10 - 200A
Usable Electrode Diameter : 1.6 - 5.0mm
Rated Duty Cycle : 60 percent at 200A
Protection Class : IP21

Welding Mask / Helmet
With auto darkening filter
Viewing area - 100 x 60mm
Filter size - 114 x 133 x 11mm
Switching time - 1/25000s

Welding Helmet
with auto darkening visor filter
Size : 90 x 45mm
Light states : DIN 4
Dark states : DIN 9 - 13
Light to dark : 1/25000 sec
Dark to Light : 0.4 sec
2 x AAA batteries Supplied
Manual-on / Auto-off after 15 minutes idle time

Fibreglass Welding Blanket
Heavyweight flame-retardant fibreglass blanket with brass grommets.
Provides protection to equipment and work areas from sparks and spatter.
Size : 4 x 6ft | 1220mm x 1830mm
Thickness : 0.6mm
Working temperature : 550 degrees C
Ideal safety equipment if you are doing any type of welding.

Hand Riveting Tool
Rivet Sizes : 2.4 | 3.2 | 4.0 | 4.8mm
Ergonomic Comfort Grip with PVC Handle

Swivel Head Rivet Gun
With 4 Interchangeable Tips 2.4 | 3.2 | 4.0 | 4.8mm and 75 Rivets

Thread Insert Nut / Stud Rivet Gun
360 Degree Swivel Head Hand Riveter
for aluminium / steel / stainless steel rivets / rivet nuts and rivet studs.
With Nozzles and Mandrels for -
Rivets : 2.4 | 3.2 | 4.0 | 4.8mm or 3/32 | 1/8 | 5/32 | 3/16in.
Rivet Nuts : M3 x 0.5 | M4 x 0.7 | M5 x 0.8 | M6 x 1
Rivet Studs : M4 x 0.7 | M5 x 0.8 | M6 x 1
Plus 3 spanners

11in. / 280mm Heavy Duty Rivet Gun
with waist bottle for spent rivets
Nozzle Sizes : 2.4 | 3.2 | 4.0 | 4.8mm
With Comfort Grip

Long Arm Riveter 17in. / 430mm
with 2 handed operation for extra leverage
Rubber Handles

Riveter with Extra Long Handles
Nose Pieces for - 1/8in. 3/16in. 3/32in. and 1/4in
25 Rivets of each size- 1/8in. 3/16in. 3/32in. 1/4in.
Nose Spanner

Folding Long Arm Riveter and Nut Riveter Set
Extra Long Folding Arms with Comfortable Cushion Grips.
Pop Rivet Mandrels : : 3.2 | 4.0 | 4.8 | 5.0 | 6.4 mm
Nut Rivet Mandrels : M4 | M5 | M6 | M8 | M10
Nosepiece for Nut Rivet Mandrel
Spanners : 5.5 / 8.5 | 12 / 17mm | 15 / 19mm
Suitable for aluminium / steel and stainless steel threaded rivets and blind rivets.

15pc 3-in-1 Riveting Tool Set
Suitable for blind rivets / blind rivet nuts and nibbling
with 2 nibbling inserts | 5 interchangeable mouthpieces
and 6 interchangeable rivet nut pulling spindles.
Low effort due to innovative lever technology.
Narrow head pliers with rubber grip.
Aluminium Blind rivets : 2.4 | 3.2 | 4.0 | 4.8 | 6.4mm
Steel Blind rivets : 2.4 | 3.2 | 4.0 | 4.8mm
Rivet Nuts : M3 | M4 | M5 | M6 | M8 | M10

Professional Nut Riveter
3mm 4mm 5mm 6mm

Pump Action Nut Riveter M3 - M12
With Ergonomic Aluminium Alloy Body and Grips
Riveter Heads : M3 | M4 | M5 | M6 | M8 | M10 | M12
Providing more than 40 percent increased leverage
Rapid loading and unloading nut structure
Length : 360mm / 14in.
Working stroke : 7mm
Weight : 1152g
Multi-function Wrench

Nut Rivet Drill Adapter Kit
CNC machined Aluminium Adapter with CRM mandrels.
Convert a cordless or corded drill into a power nut riveter.
Note : Drills must feature torque limiting clutch.
Includes 7 mandrels and nosepieces -
Metric : M3 | M4 | M5 | M6 | M6 | M8 | M10.
Hex Shank Size : 1/4in.

18V Cordless Riveting Gun Kit
With 18V 4.0AH Li-Ion Battery
and 18V 4.0AH Battery Charger
Rivets : 3/32 to 3/16in or Metric Equivalents
Stroke : 19mm
Max working force : 9000Nm
Max mandrel diameter : 5.0mm
Weight : 3.51lbs in use.
100 Minute Quick Charger

Vehicle Bonnet and Boot Strut Clamp
For locking the bonnet or tailgate gas struts when failed.
Jaw width : 10mm

Vehicle Bonnet or Tailgate Telescopic Support
Ideal for the workshop or at breakdowns where the vehicle bonnet
or boot supports have failed or are to be removed for service.
3 Section telescopic light weight aluminium tube with tough rubber pads.
Lock in any position with a simple twist.
Adjustable from : 540 to 1200mm.

4pc Body Filler Applicator Set
Flexible Steel Blades
Sizes : 2 | 3 | 4 | 6in. / 50 | 75 | 100 | 150mm
with Rubber Grips

3pc Plastic Putty Knife Set
Blades : 38 | 74 | 152mm Wide
Also useful as spreaders
Lightweight and Durable

3pc Plastic Spreader Set
Blades : 100 | 130 | 160mm Wide
Useful for many filler applications and putty spreading jobs
Easy Clean

Shrinking Hammer - 628G
Ideal for Bodyshop use

7pc Panel Beating Kit
or Auto Body Repair Set
Hammers : Bumping | Pick and Finish | Reverse Curve
Dollies : Curved | Double End | Shrinking | Utility

7pc Panel Beating Kit
Auto Body Repair Set
Bumping | Pick and Finish Hammer
Reverse Curve Hammer
Utility | Double End Dolly
Shrinking and Curve Dolly

9pc Panel Beating Kit / Auto Body Repair Set
Drop-forged Steel Dollies and Spoons.
4 Hammers : Bumping | Skinning | Pein & Pick / Finish
with Professional Hickory Handles.
3 Dollies : Toe | Universal | Heel.
2 Spoons : Dinging | Surfacing.
Use on flat and curved surfaces.
Hammer Heads and Dollies made from 1055 medium carbon steel
Natural Hickory Wood Shafts

Metal Forming Kit with Interchangeable Heads
For use on 18 - 20 gauge Steel
and 16 - 18 gauge Aluminium or Brass.
Fits any standard 0.401 Parker Taper Air Hammer.
Vinyl impact absorbing grip -
provides a greater measure of control.
Quick-change design for efficient forming head changes.
Allows for fast or rough shaping of metal panels.

6pc Dent Puller Pad Set
Replacement puller pads
for dent repair kit CT3789
3 x 35mm Round pads
3 x 16 x 32mm Oval pads

Dent Removal Tool Kit
Suitable for repair of minor dents with
Slide Hammer to pull out hard dents
Dent Lifter for slight dents on flat surface
Baby face mini lifter or normal mini lifter
Scraper for gentle removal of dent pads
Glue Gun - 230V / 40W / 50Hz
8 Black glue sticks - 11 x 200mm
Glue Tabs in various sizes and shapes

13pc Slide Hammer / Dent Puller Set
Slide Hammer - 10lbs
With steel hooks pullers and attachments

1.4kg Dent Puller Slide Hammer
with air powered suction cups : 60 | 120 | 150mm
Easily remove dents with the 1400g slide hammer.
1/4 BSP fitting with 330mm hose.
Air consumption : 113 L/min
Length: approx. : 620mm
Working pressure: 6.3 to 10.3 bar / 90 to 150psi

8pc Dent Removal Tool Set
Ideal for removing small dents
and minor accident damage.
Half-round bars - 21 and 22 cm
Round bar - 42 cm
Half-round pointed bar - 60 cm
Angled ball-headed bars - 46 and 100 cm
Pointed bar - 56 cm
Special-type hooked bar - 107 cm

Fender Roller
Wheel Arch Reformer and Flaring tool
Increases the clearance between wheel and fender
Use to flare the fenders for wider wheels
Repair wheel arch collision damage.
Rotates from the wheel hub centre.
Universal fitting

52in. Car Panel Bumper Alignment Repair Tool
Heavy duty 32mm diameter tubing with
Heavy Duty Chain and 2 Steel Claw Hooks.
Tube Length : 1.33M approx.
Chain Length : 2.04M approx.
An alignment bar designed for Bumpers /
Hoods / Decks / Panels / Brackets and Doors.
Ideal for auto body shops to help shape damaged bodywork.

10 Ton Hydraulic Automotive Body Repair Kit
Complete with Heavy Duty Hand Operated Hydraulic Pump
Full Range of Accessories

Portable Hydraulic Repair Tool Kit
16mm | Min Height - 42mm
58mm | Min Height - 132mm
73mm | Min Height - 140mm
120mm | Min Height - 570mm
125mm | Min Height - 280mm
130mm | Min Height - 670mm
140mm | Min Height - 363mm

20 Ton Hydraulic Shop Press
Floor Standing Heavy Duty H-Frame
Stroke : 160mm
Work Range : 0 - 998mm
G.W. : 104kgs
N.W. : 102kgs
Package Size : 1630 x 190 x 320mm
Ideal for Straightening / Bending and Stamping

30 Ton Hydraulic Shop Press
Floor Standing Heavy Duty H-Frame
Ideal for Straightening / Bending and Stamping

50 Ton Hydraulic Shop Press
Floor Standing Heavy Duty H-Frame Construction
Capacity : 50 Tons
Working Range : 0 - 1000mm
Ram Stroke : 185mm
Air Pressure : 110 - 120psi
Air Inlet : 1/4in. NPT
Ideal for straightening / Bending and Stamping.