VAG Timing Tool Set
for 1.8 / 2.0 TSI / TFSI 4-cylinder Petrol Engines.
For correcting camshaft and crankshaft timing position.
Applicable to :
the EA888 Series Engine on -
1.8 R4 16V TSI / TFSI
2.0 R4 16V TSI / TFSI

VAG Timing Tool Set
for 1.2 / 1.4 / 1.6 / 2.0 / 2.4 / 3.2 FSI / TFSI Petrol Engines
Allows the installation and removal of the camshaft / timing belt
when checking and adjusting the camshaft timing.
Cam Belt / Chain Locking Pins
Camshaft Alignment / Locking Tools
Crankshaft Alignment & Locking Pins
Dial Gauge and TDC Indicator
Tensioner / Pulley Bolt & Locking Pins
Timing Belt Spanner Wrench

VAG Timing Tool Set
for 1.8 / 2.0 TFSI Chain Drive Petrol Engines
Essential tools required to remove the camshaft adjuster valves
and a useful crankshaft pulley holding tool.
Some applications and repair operations will require additional tools.
Applicable to : Audi | Seat | Skoda | VW

VAG Timing Tool Set
for 2.9 / 3.0 TFSI EA839 Petrol Engines
Designed to fix the camshafts in position
when removing and installing the camshaft timing chains.
Applicable to : Audi / Porsche / VW - 2016 onwards.
OEM numbers : T40331 | T90000 | T90001 | T90002.

VAG Timing Chain Tension Lever
for 1.8 / 2.0 TFSi Petrol Engines
Allows the timing chain tensioner to be retracted and locked
without removing the lower timing cover.
Applicable to TFSI engines from 2007 onwards
on Audi / Seat / Skoda / Volkswagen models.
OEM Code : T40243

VAG Timing Tool Set
for Porsche 911 Engines
for checking and adjusting timing on Porsche 911 - 996 / 997.
Camshaft Holding Tool for engine M96 / 03.
Camshaft Locking Tool for engines M96 / 03 and M97 / 01.
Locking Pins for engines M96 / 03 and M97 / 01.

VAG Timing Tool Set
for 2.5 / 2.7 / 3.2 / 3.4 / 3.6 Porsche 911 / Boxster Engines
Allows engine timing when performing valve-train service.
With - TDC Alignment Pin
Camshaft Lock & Alignment Tools
Camshaft Holding Tools
Connecting Rod Centring Mandrel
Piston Pin Driver and Extensions
Porsche Boxster : 2.5 / 2.7 / 3.2 - 986 / 987 1998 - 2000
Porsche 911 : 3.4 / 3.6 - 996 / 997 2002 onwards

VAG Timing Tool Set
for Porsche Cayenne and Panamera V8 Engines
Also Porsche Cayenne utilizing the M97/01 V8 engine.
For camshaft timing on Direct Fuel Injection /
Turbo and Normally-aspirated Engines
Allows TDC Timing during servicing the
Camshafts / Cylinder Head / Timing Chain
or Variable Valve-timing Cam Phasers.
Cayenne V8 up to 2007 and Cayenne and Panamera 2008 onwards

VAG Timing Tool Set
for Porsche Macan 3.0S / 3.6 Turbo Engines
For changing the timing chain
or replacing the cylinder head gasket.
Engine codes : MCT.M / MCT.L
Ideal for use with Porsche Cayenne Timing Kit - CT3767
OEM Code : 9861

Timing Tool Set
for Volvo and Land Rover Vehicles.
with 3.0 and 3.2 T6 Engines as of 2007
and Land Rover Freelander 3.2 / i6 2006 onwards
Camshaft and Crankshaft locking tools
for checking and adjusting the engine timing on
Applicable to : Volvo S80 | XC90 | XC60 | XC70

Volvo Camshaft Belt Tool Kit
Used for the replacement of the camshaft drive belt
on popular Volvo 2.0L and 2.5L - 5 cylinder diesel engines.
Like - C30 | C70 | S40 | S60 | S80 | V40 | V50 | V60 | V70 | XC70 range.
With Crankshaft Pulley Holding Tool
Camshaft and Crankshaft Locking Pins

Volvo / Ford Timing Tool Set
for 1.6 | 2.5 | 2.4D Engines
For setting the camshaft and crankshaft timing
when replacing the cylinder head gasket.
Crankshaft Holding Wrench
Camshaft Timing Tool
Crankshaft Timing Tool
Camshaft Holder

Volvo Timing Tool Set
For 4 | 5 | 6 Cylinder Engines up to 2006
Camshaft / Crankshaft Alignment Tool Kit
Camshaft Cover Tool
Camshaft Alignment Tool
Crankshaft Locking Tool
Retaining Tool

Volvo Timing Tool Set
for 2.0 Diesel Engines / 2013 - 2018
Provides the tools to lock and hold the
Crankshaft and High Pressure Fuel Pump.

S60 / 2013 - 2018 | S80 / 2013 - 2016 | S90 / 2016
V40 / 2014 - 2019 | V60 / 2013 - 2018 | V70 / 2013 - 2016 | V90 / 2016
XC40 / 2017 - | XC60 / 2013 | XC70 / 2013 - 2016 | XC90 / 2014 -
2.0L Diesel D4204T
OEM Codes : 9997495 | 9997233

Volvo Timing Tool Set
for B4204 8 Speed Transmission Engines.
For aligning the camshaft and crankshaft and
working on valve drive and renewing the cylinder head gasket.
Belt Pulley Counter Holding Tool
Crankshaft Wheel Puller
Radial Seal Ring Mounting Tool
Camshaft Sprocket Tool
Camshaft Alignment Tool

Air Conditioning Service Kit
For AC Compressor Clutches on most vehicles.
With 2 and 3 hole Puller Plate

Air Conditioning Water Pump Pulley Locking Wrench - VAG
Audi / VW Pump Pulley Wrench
For holding the water pump pulley on VAG vehicles

12pc Air Conditioning Set
Valve Cap Removers - SWI 2mm / SW15mm
Valve Core Tools - Standard 2.2mm / Large 3.2mm
Tamper-proof Bits - T10 to T40
Bit Adaptor - 1/4in.Dr

Special Socket
8 Point | 100mm Deep | 3|8in.Dr
For loosening and tightening intake manifold fastening screws.
Applicable to : Mercedes | Nissan | Opel | Renault Vehicles
with 1.6 DCi | CDTi Engines

High Pressure Adjustable Quick Coupler
Adapter for A/C manifold gauge set / R1234YF type.
Quick and easy connect / disconnect
Protection sleeve to provide safety protection
to avoid injury and refrigerant loss, defending against leakage.

Low Pressure Adjustable Quick Coupler
Adapter for A/C manifold gauge set / R1234YF type.
Quick and easy connect / disconnect
Protection sleeve to provide safety protection
to avoid injury and refrigerant loss, defending against leakage.

Air Conditioning System Test Kit
For testing automotive air conditioning systems using R1234YF
refrigerant only by comparing the high and low pressure readings.
60mm gauges with tough rubber protective guard with 7/16in. copper coupler
Low : -30 - 120 psi / -1 - 8 bar
High : 0-500 psi / 0 - 35 bar
Blue Hose - 1/4in. FFL x 50in.
Red Hose - 1/4in. FFL x 50in.
Yellow Hose - 1/2in. ACME x 50in.
Sight glass for viewing condition of refrigerant.

Air Conditioning System Test Kit
Use to test / evacuate and fill A/C systems
using the R134A refrigerant.
Compares high and low pressure readings
using the vehicle A/C system specifications.
Twin 70mm gauges with impact-resistant lenses.
Sight glass for viewing condition of refrigerant.
Quick-connect fittings. High pressure safety valve.

Carbon Dioxide Manifold Gauge Set
For measuring pressure on air conditioning systems
using R744 refrigerant / carbon dioxide.
Includes Gauge and Valve Block with Hook.
High and Low Pressure Hoses with
connecting hose to service device.
Units in PSI / Mpa
G1/4-19 thread.
Steel braided hoses for CO2

230V Vacuum Pump
Power: 1/4Hp
Rotating speed: 1440rpm
Inlet port : 1/4 SAE
Oil capacity : 200ml
Ultimate Vacuum : 10pa / 75ml
Use with CT3622 Manifold Gauge Set

Hand Held Refractometer
For measuring the freezing point of
either Propylene or Ethylene Glycol based antifreeze
May also be used for checking the strength of battery electrolyte

Block Tester Kit
With Block Tester Powder
Detects exhaust gasses in radiators
and so checks for gasket damage
or cracked and warped cylinders.
Works with Petrol engines.
Not recommended for Diesel vehicles

8pc Block Tester Kit
Detects exhaust gasses in the radiator
and checks for gasket damage also cracked or warped cylinders.
Works with Petrol | Diesel and Gas powered vehicles.
Use with combustion leak detector fluid - not included.
Suitable for use with sets - CT1585 and CT3380.

Block Tester Powder and Bottle
For use with Block Tester Kit CT1133 and CT3923

Leak Detector Set with 3W UV LED Light
Allows detection of leaks in Air Condition Systems also
Engines and Gearboxes in conjunction with fluorescent additives.
Includes 3W LED UV flashlight.
1500mAh Rechargeable battery with charger
Protective glasses with special UV filter
Hose / Syringe and Adaptor.

12V Smoke Leak Detector
For detecting leaks in pipe systems on cars and motorcycles
such as fuel pipes / air intakes and the radiator.
Smoke output value : 1 - 6 L/min
Output Pressure : 10 - 18psi
With Built-in air pump / Controllable flow value
Test Oil Capacity : 100ml
Supplied with all accessories needed.

Identifying Clips - 9 colour coded pairs

4pc Pipe Line Stopper Kit
Sizes : Banjo | 3/8 | 5/16 | 1/2 Inch
Spring loaded design for use with all Automotive Fluids.
Use to plug steel lines once disconnected.
Prevents fluid leaks and contamination during service.
Use with an

4pc Pipe Line Stopper Kit
Spring loaded design for use with all Automotive Fluids.
Use to plug steel lines once disconnected.
Prevents fluid leaks and contamination during service.
Use with any automotive fluid.
Spring loaded design installs in seconds.
Sizes - Banjo | 3/8 | 5/16 | 1/2 Inch

Radiator Fin Reformer
Straighten damaged fins.
Remove debris without damage.
Use on oil coolers and air conditioner condensers.
Suitable for most makes and models of vehicles.
With spacing of 8 | 9 | 10 | 12 | 14 and 15 fins per inch.

5pc Universal Cooling System Pressure Test Kit
Four universal cone adaptors fit a wide range of vehicles.
Hand pump with gauge allows simple and easy controlled testing.
Release pin allows depressurisation prior to detachment.
Contents:
Pressure pump
Cone adaptors : 17-24mm | 28-31.5mm | 37-39.5mm | 47-48.5mm
Cone adaptor system for sealing and pressurising the cooling system.

Radiator Pressure and Cooling System Test Kit
Universal test for leakage in radiators and coolant systems.
Colour coded caps | Vacuum purge and refill tool
Pressure testing range 0 - 35 psi / 0 - 2.5 bar
17 test caps for testing cooling systems on most vehicles

14pc Radiator Pressure Test Kit
Universal for Most Vehicles
Pressure Testing Pump with Gauge
Temperature Testing

Cooling System Vacuum Purge / Refill Kit
Supplied with three adaptors.
Air Pressure : 90 psi.
Air Consumption : 12cfm.
Fluid Hose Length : 900mm.
Air Inlet Size : 1/4 BSP.

Water Pump Tester Kit
For testing cooling system water pumps in situ while the engine is running.
Indicates the coolant flow by measuring pressure rises
that occur due to the coolant flowing around the block.
Gauge : 0 - 15psi
Rubber Pipe Seals and Blanking Plugs
2 part Pipe Connector Body
2M Nylon Hose and Male Connector

VAG Radiator Cap
No.23 for Audi / Porsche / Skoda / Seat / VW

Coolant Pressure Test Cap
for Ford and Volvo Vehicles
Applicable to : Ford / Updated Type
Volvo : V70 / XC70
Use with Radiator Pressure Test Kits :
CT1585 | CT3380 | CT3923 | CT5665

Coolant Pressure Test Cap
for Vaxhall and Opel Vehicles - Updated Type
Use with Radiator Pressure Test Kits :
CT1585 | CT3380 | CT3923 | CT5665

Radiator Adapter Connector
90 Degree

Digital Thermometer
105mm Stainless Steel Probe
Switch between Celsius and Fahrenheit
Temperature Range : -50 C to +300 C / -58 F to +572 F
Temperature Steps : 0.1 C / 0.2 F
Power : 1.5V Battery - included
Auto power off after 15 minutes
Overall Size : 180mm x 21mm

Handheld Infrared Thermometer
Precise non-contact measurement
8:1 Optical resolution
Response Time : 500ms
F or C selectable scales
Weight : 5oz /135g
9V Battery included

Air Flush Gun for Cooling Systems
Step adaptor for different hose diameters.
For use with air and water to clean most systems.
Trigger handle to control flushing and simulate pulsing force.
5 Adaptor sizes : 19 | 29 | 32 | 36.5 | 40mm
Operation pressure : 90psi

Engine Cooling System Cleaning Machine
Cycle Cleaning with Equal Volume Change
Rated Voltage : DC12V
Rated Frequency : 50 / 60Hz
Pressure Gauge Range : 0 - 150psi
Outlet Pipe Length : 2.5M
Relative Humidity : approx. 85 percent
Tank Capacity : 25Lx2

Hose Clip Nut Driver
1/4in.Dr with Flexible Shaft
supplied with 6 / 7mm and 7 / 8mm reversible sockets

3pc Hose Clamp Set
Clamp Sizes : 6 | 7 | 10in.
Ideal for Brakes Radiators Air Conditioning etc