Engine Timing Light Gun
For checking and adjusting the ignition timing.
Suitable for all 12V petrol engines where it is possible to adjust the ignition timing.
Ignition signal via cable of first cylinder.
Bright stroboscopic light allows good readability of the ignition timing mark.
Features include xenon bulb and inductive pick-up.
Impact resistant housing with on / off trigger

Timing Light with Digital Display
Voltage : 12V / 10W.
Stroke select function.
Test rotation speed and advance angle.
Max Test Angle : 90 degrees
Precision : 0.1 degrees

16pc Universal Timing Tool Set
with Camshaft / Crankshaft Locking Tools
for Diesel and Petrol Engines.
Suitable for carrying out timing belt servicing on :
Audi / Citroen / Fiat / Ford / Isuzu / Peugeot / Rover / Saab / Seat / Skoda / Vauxhall / VW

19pc Universal Timing Tool Set
For Locking and Setting Timing when replacing timing belts
Camshaft Lock
Crankshaft Pin & Locking Tool TDI Pump Nozzle
Flywheel Locking Tool
Locking Pins : 5.0mm diameter
Locking Pin : 6.1 mm diameter
Balancing Shaft Locking Pin : 7.3mm / 6.1mm diameter
Suitable for most vehicles

Universal Twin / 4 Cam Lock
For Petrol and Diesel Engines
Locks twin camshafts to timing marks during timing belt replacement
Suitable for locking between cam and diesel injection Pump sprockets

High Pressure Pump Sprocket Remover
For removing the diesel fuel pump sprocket on
Hyundai and KIA chain drive CRD diesel engines
found on 1.1 | 1.4 | 1.5 | 1.6 | 1.7 litre models.
OEM Code : 09331-2A000

Timing Tool Set
For Camshaft / Crankshaft and Flywheel Locking.
Allows inspection and adjustment of engine timing
on Ford / Peugeot / Rover / Volvo - 2.0 | 2.2LD vehicles.

Motorcycle TDC Dial Indicator Kit
Precision Gauge for locating TDC position
for Ignition Timing Adjustment on most Motorcycles.
Suitable for most bike cylinder heads
with 10mm and 14mm Spark Plug Adapters.

BMW Timing Tool Set
For checking and setting camshaft timing when installing
the VANOS adjustment unit on BMW M3 vehicles with
chain drive 3.2L / 6 cylinder 24 valve S54 petrol engines.
Valve timing checking tool.
Camshaft setting tool and pins.
VANOS alignment lever.
Crankshaft Turning Tool and Locking Pin.
VANOS Spacers.

BMW Timing Tool Set
kit for Dismantling and Assembling the Camshaft
preparing Valve Timing and Cambelt Servicing.
For models : 3 | 5 | 7 | X3 | X5 | Z3 | Z4 |
E30 | 31 | 32 | 34 | 36 | 38 | 42 | 46 | 53 | 60 | 61 | 65 | 66 | 83 | 85
Engine Codes : M40 | M44 | M50 | M52 | M54 | M56 with DOHC

BMW Timing Tool Set
Setting and locking set for BMW petrol engines.
Includes tools for setting and locking camshafts.
Plus tools for setting up timing chain tension.

Engine Codes :
M40 | M42 | M50 | M60 | M62 | M70

OEM Codes :
113240 | 112300 | 115120 | 11440 | 113390 | 114220

BMW Timing Tool Set
For the Removal and Installation of the Camshaft Chain
and adjusting the timing on -
BMW Diesel Engines :
M41 | M47TU | M47TU T2.
M51 | M57TU T2 3.01 / 1998 - 2008.

OEM Codes :
112300 | 113340 | 113360 | 135190
135191 | 135192 | 116320 | 116321 | 116322

Diesel Timing Kit
For BMW | JLR | PSA Chain Drive Vehicles
A comprehensive kit designed for
setting camshaft and crankshaft timing position.
Suitable for 1.8 | 2.0 and 2.5 chain drive diesel engines.
With Timing Chain Compressor and Locking pins
Injection Pump Lever and Sprocket Puller
Crankshaft Holding Tool

BMW Timing Tool Set
For replacing the timing belt or chain on both petrol and diesel engines.
Special wrench for removing and installing the VANOS unit.
M22 threaded for M42 / M60 engines
M26 threaded for M50 / M52 engines

BMW Single VANOS Camshaft Timing Kit
For setting engine timing during chain removal and installation.
Compatible with some BMW 4 and 6 cylinder none VANOS engines
With Camshaft Locking Plate
VANOS Turning Wrench
and Top Dead Centre Pin

BMW Camshaft Alignment Tool Kit
For BMW M47 and M57 2.0L 16 valve engine servicing.
Applicable to a wide range of BMW vehicles
With Crankshaft pin / Camshaft setting plate
Clamp for camshaft locking tool and 2 timing pins.

BMW VANOS Camshaft Alignment Tool Set
Tools to assemble and time the VANOS units on
BMW M52TU / M54 and M56 / 6 Cylinder Engines.
Alignment Jig Adjusting plate for setting valve timing.
Jig for pre-assembling secondary chain sprockets.
Lock Pin secures chain tensioner during timing.
VANOS Compressed Air Connector

BMW Timing Tool Set
for M60 / M62 / M62TU VANOS Equipped Engines.
Allows checking and adjusting the engine timing
Chain Tensioner Tool
Camshaft Locking Tools for cylinders
Crankshaft Locking Tool
Rotating Tool
Transmitter Wheel Tool Sets
Vanos Valve Socket

BMW Timing Tool Set
for N20 and N26 Engines
Engine alignment tools applicable to
BMW 4 cylinder turbo engines.
With Camshaft Locking Tool
Camshaft Fixating Base
Alignment Pin
Chain Tensioner

BMW Timing Tool Set
for 1.6 N40 / N45 / N45T Petrol Engines
with Vanos Alignment Plate
Camshaft Setting Plate - Inlet
Camshaft Setting Plate - Exhaust
Timing Chain Tensioner Pre-load tool
Flywheel Locking Pin
Camshaft Setting Plate Securing Screw.

BMW Timing Tool Set
Contains important tools for dismantling and assembling camshafts.
during servicing and valve timing.
For models : 1 | 3 | S | X3 | Z4.
Series Type : E87 | 46 | 60 | 85 | 83 | 90 | 91.

BMW Timing Tool Set
for 1.8 and 2.0 Chain Drive Petrol Engines
Allows adjusting and setting timing on Valvetronic systems.
Includes tools to align the Twin Vanos unit.
Suitable for BMW N42 / N46 N46T

BMW Timing Tool Kit Set
For use on N43 Chain Driven Engines
In Series 1 | 3 and 5 models
Includes Vanos sensor alignment tool

BMW Timing Tool Set
for N47 / N47s 2.0 Twin Cam / Chain Drive Diesel Engines
Fitted in the 1 Series / 3 Series / 5 Series and X3
Crankshaft turning tool to rotate engine to TDC position

BMW Timing Tool Set
For Diesel N47 / N47S engines with chain drive.
With injection pump lock adapter
and Camshaft Chain Tensioner Lock.

BMW N47 / N47S Diesel Engine Timing Tool Set
for turbocharged chain drive BMW 4 & 8 cylinder diesel engines
2.0 N47 | N47S | N57 | N57S / 2007-2015
Camshaft Locking
Sprocket Puller
Crankshaft Lathe
Crankshaft Wheel Locking Pin
Crankshaft holding & Locking tools
2 Pins to lock the chain tensioner

BMW Timing Tool Set
For engine codes : N51 | N52 | N53 | N54
With Camshaft and Crankshaft Locking Tools
Transmitter Wheel Locking Tool.
Suitable for a wide range of models.

BMW Timing Tool Set
For the removal and installation of the variable camshaft unit
on BMW 6 Cylinder Engines : N51 / N52 / N53 / N54 / N55
with T.D.C pin
Camshaft Alignment Jig
Tension Adjuster
Setting Gauge

BMW Timing Tool Set
BMW Engine Camshaft Alignment Tool Kit
To enable the correct timing when servicing
N40 / N42 / N62 / N62TU / N73 engines with dual camshafts.
Gauges for locating camshaft in TDC position
Pin for locking flywheel in TDC position

BMW Timing Tool Set
for N63 / N74 / S63 Models
N63 engines up to September 2012.
N74 V12 Engines which are not very common.
S63 engines prior to September 2011.

BMW Timing Tool Set
for N63 and S63 4.4L V8 Engines
Engineered to locate the camshaft in TDC position
to check and adjust the timing chain tensioner on -
S63 - 5 series F10 M5 2010 - 2014
S63 - 6 series F06 / F12 / F13 M6 2011 - 2014
S63 - 6 series F06 650i / 650ix 2011 - 2014
N63 - 7 series F02 ALPINA B7LX 2013 - 2014
N63 - X series F15 X5 2012 - 2014

BMW Timing Tool Set - S65
Provides alignment to top dead centre point to maintain the engine.
Camshaft Alignment Tools
Chain Tension Guide Locking Tool
Split Camshaft Gear Setting Tools
Mounting Screws for camshaft adjusting tools
Applicable to : BMW M3 E90 / E92 / E93 2007-2013
Engine codes: S65 B40A / 4.0L

BMW / Mini Diesel Timing Tool Kit
Engine timing tool kit for diesel BMW Mini
with engine codes W16D16 / 9HZ and W16D16UO
used on Mini / Clubman 07-10 with chassis R55 | 56 | 57.
Also used on -
Citroen: 1.6 diesels in C2 | C4 | C5 |
Xsara Picasso | Grand Picasso | Berlingo
Peugeot : 1007 | 206 | 307 | 207 | 308 | Partner Mk3

BMW / Mini Timing Tool Set
for BMW / Mini One 2001-06
Mini Cooper 2001 - 06 and Mini Cooper S 2002 - 06
Set contains Camshaft Sprocket Holding Tool
Engine Support Bracket and Tension Assembly Tool
This kit is specifically designed for petrol engines on pre 2009 Mini One / Cooper and Cooper S models.
Engine Codes : W10 | W11 | N14

BMW / Mini Timing Tool Set - N13 / N18
Comprehensive tool kit for setting camshaft timing on
1.6 petrol engines in BMW and Mini since 2012.
To lock camshafts in 90 degree piston position / TDC.
Camshaft locking fixtures with hold-down bolts
Crankshaft locking pins
Rigid Chain Tensioner

BMW / Mini Timing Chain Kit
For 1.2 / 1.5 / 2.0 / 3.0 Petrol Engines
Applicable to :
1 / 2 / 3 / 4 / 5 / 6 / 7 series
i8 / X1 / X2 / X3 / X4 / Z4
Mini : Clubman / Hatch / Convertible / Countryman.
Engine Codes : B38 - 1.2 / 1.5 | B48 - 2.0 | B58 - 3.0
Suitable for the latest B38 / B48 Mini and B38 / B48 / B58 BMW engines.

BMW / Mini Engine Camshaft Timing Tool Set
Variable Camshaft Timing Unit Removal and Installation Kit.
Applicable to : BMW Mini B38 / B48 / B58 Engines.

BMW / Mini / PSA
Petrol Engine Timing Kit
For 1.6 Turbo Petrol Engines.
Applicable to :
Mini / Clubman / Cooper S - JCW / R55 / 56 / 57
Coupe / Roadster / Countryman / Paceman - JCW / R58 / 59 / 60 / 61.
OEM Codes : 119550 | 119551 | 119552 | 119590

BMW / Mini / PSA Timing Tool Set
For timing 1.4 & 1.6 Valvetronic direct injection chain drive petrol engines
fitted in BMW Mini / Citroen and Peugeot vehicles.
With Camshaft Locking Tools
Camshaft Alignment Clamp and Crankshaft Setting Pin.
M6 Setscrews Chain Tensioner.
Mini Cooper / Coupe | Citroen C4 | Peugeot 207 / 308 / 3008 / 5008

BMW / Mini / PSA
Petrol Engine Timing Chain Service Tool Kit
Essential for the removal or installation of the timing chain assembly
on a range of BMW / Mini and PSA petrol engines.
Kit includes balance shaft aligners
crankshaft gear holding tools
and chain tension locking pin.

Chrysler Timing Tool Set
for Chrysler Belt Drive Engines
With - Camshaft Locking Pins
Flywheel Locking Pins
Balance Shaft Locking Pins
Tension Adjustment Wrench
Applicable to : Voyager | Grand Voyager
Jeep Cherokee / 01 - 08 | LDV Maxus / 05 - 08

Chrysler Timing Tool Set
For 2.8L CRD Chrysler / Jeep engines - 2007/8 or later
where the cam belt drives one camshaft
and the second camshaft is driven via gears.
With components to lock the crankshaft and camshafts in their timed position
and remove or replace the cam belt and associated components.
Applicable to : Chrysler Grand Voyager | Jeep Cherokee / Wrangler | Dodge Nitro

Chrysler Timing Tool Set
For Chrysler / Jeep / Mercedes
For timing Chrysler CRD diesel engines
and a huge range of Mercedes-Benz diesel chain drive engines.
with flywheel locking plates with M6 x 90mm bolts
and camshaft locking pin set.

Fiat Timing Tool Set
Twin Cam Petrol Engines : 1.2 | 1.4 | 1.6 | 1.8 | 16V
JTD Diesel Engines - 1.9D / TD | 1.9JTD | 2.4TD / JTD
Camshaft Locking Tool
Crankshaft Locking Tool
Crankshaft Pulley Tool
Flywheel Locking Tool
Injection Pump Shaft Locking Tool
Timing Belt Tensioning Tool

Fiat Timing Tool Set
For 1.2 16V Engines
To determine the specified piston position
and prevent the camshaft from turning
maintaining position when changing the timing belt
or during other engine repairs.
Applicable to Fiat 1.2 16V Twin Cam Petrol Engines
on Fiat Punto / Brava and Bravo vehicles.

Fiat Timing Tool Set
Fiat / Ford / Lancia 1.2 | 1.4 8V Belt Drive Petrol Engines
Includes :
Crankshaft Locking Tool
Camshaft Setting Tool
Camshaft Sprocket Locking Tool
Camshaft Cover Aligner
Camshaft Aligning Tool
Tensioner Adjuster

Fiat Timing Tool Set
Alfa Romeo / Fiat
For Setting and Locking 1.4 MultiAir Belt Drive Petrol Engines
With Camshaft Timing Tool / Crankshaft Locking Tool / Tension Pulley Adjuster
The MultiAir engine replaces the inlet camshaft with an electro / hydraulic system
operating the inlet valves. This kit is required to set the engine timing
when carrying out belt replacement on -
Alfa Romeo Mito / Giulietta | Fiat Bravo / Punto | Lancia Delta

Fiat Timing Tool Set
Alfa Romeo Petrol Engine Setting / Locking Kit
For Alfa Romeo 1.4 / 1.6 / 1.8 / 2.0 16V
Twin Spark / Twin Cam / Belt Drive Engines
Timing Belt Tensioning Tool
Balance Shaft Belt Tensioning Tool
Camshaft Setting Tools ( Camshaft Locking Blocks )
Vehicles : 145 / 146 / 147 / 155 / 156 / 166 - Spider / GTV

Fiat Timing Tool Set - Alfa / Fiat / Lancia
Flywheel / crankshaft / camshaft / fuel injection pump shaft
belt pulley and tensioning
Complete classification chart included.
Fits various engines and models

Fiat Timing Tool Set
For Petrol Engines on Alfa Romeo / Fiat / Lancia vehicles
Featuring inlet / exhaust camshaft locking blocks
Supplied with a TDC position tool and variation socket.