Bearing Separator
Drop forged
Clamping Width : 46mm - 230mm max
Clamping Bolt Length : 350mm / Distance : 224mm / Thread : M25 x 2.5
Puller Bolt : 3/4in. x 10 UNC
Puller Bolt distance : 164mm / 350mm max
Splitting Knife Base : 102mm - 288mm max
Suitable for removing bearings / gears and bushings from shafts.

Wheel Hub Bearing Unit Tool Kit
for Citroen / Opel / Peugeot / Toyota Vehicles
For pressing out and fitting compact wheel bearings on
the rear axle without removing the axle knuckle and ABS sensor.
For changing the complete Wheel Bearing / Hub Unit
on the rear axle without removing the axle leg.
The whole procedure takes place directly on the vehicle.
Suitable for compact wheel bearing numbers :
9819074780 | SU001A6528
FAG : 713 6506 80 | SKF : VKBA 7120

21pc Universal Motorcycle Chain Tool Kit
For Timing Chains and Drive Chains.
Includes a pair of chain link clip removal pliers
for removal and installation of chain lock clips.
A chain stretch tool that holds both ends of the chain together.
A comprehensive chain link separating and riveting tool
for disassembly and assembly of drive and timing chains.
Drift Punch : 2.2 - 2.9 - 3.8 - 4.8mm Diameter

2pc Tyre Lever Set
Both 12in. / 300mm
Chrome Vanadium
Supplied in a Pouch

100kg Aluminium Tow Bar Scale
Weight Scale : 50 - 100kg
Total Length : 430mm
Tube Diameter : 37mm
For caravans / mobile homes and trailers
Simply place under the drawbar and read the value.

EV / Hybrid Warning Sign
3 Sided with Magnetic Base
Made of hard-wearing plastic.
Weather & scratch resistant.
With water drain hole in the bottom.
Magnet moulded in to plastic sign to prevent scratches.
Designed to serve as a warning that a vehicle is EV or Hybrid

EV / Hybrid Warning Sign
3 Sided with Suction Cup
Made of hard-wearing plastic.
Weather & Scratch resistant.
With water drain hole in the bottom.
With suction cup - suitable for indoor and outdoor use.
Designed to serve as a warning that a vehicle is EV or Hybrid

Mechanics Vehicle Wing Cover
With 4 pockets for holding tools while working on car.
Wing cover held in place by integral magnets.
PVC material prevents scratching and marking of paintwork.
Protects vehicle body from damage while being serviced or repaired.
Size : 1200 x 1000mm

3pc Silicone Tool Storage Tray Set
Constructed of pliable silicone with Multiple compartments
to prevent scratches and damage to delicate surfaces.
Small Tray : 267 x 140 x 25mm
Medium Tray : 250 x 226 x 25mm
Large Tray : 525 x 295 x 33mm
Keep your work area clean and organised.

Folding Garage / Workshop Trolley
Easy access for adding or removing items to and from trolley.
4 Large Castor Wheels with 2 locking.
Overall Size : 640mm W x 375mm D x 830mm H
Shelf Size : 595mm W x 370mm D x 35mm H
Capacity : 30kg per shelf
Folds up in seconds for easy storage when not in use.
Can also be used as a janitorial trolley.

Cordless Power Tool Storage Rack
Flat pack assembly handy storage rack for 4 Power Tools.
Small cable cut-outs to allow chargers to be placed on top.
Multi-sized drill bit holder with additional holes for other bit storage.
The unit measures : 430mm W x 305mm H x 230mm D
Wall-mount screws included.

3pc Mini Magnetic Welding Aid Kit
Mini Magnetic Welding Ground
With Strong powerful magnets - Pull Force : 9Lbs
Holds work at : 45 | 90 | 135 degree angles.
Ideal for welding, soldering, fabricating and general assembly work etc.

Adjustable Angle Welding Magnet
With 360 degree Swivel -
which hold objects at almost any angle.
Size : 63.5 x 85.7mm
Pull Force : 22.7kg

7pc Rubber Dolly Set
Made from POM material which is rigid and non marking
ideal for use on aluminium panels.
Long Type Curved Dolly
Curved Dolly
Utility Dolly
Heel dolly
Long Type Heel Dolly
Double End Dolly
Double End Hand Dolly

11pc Bolt Extractor Set
3/8in.Dr also Hex Drive for use with Sockets and Spanners.
Metric : 6 | 8 | 10 | 11 | 14 | 16 | 19mm or
Imperial : 1/4 | 5/16 | 3/8 | 7/16 | 1/2 | 9/16 | 5/8 | 11/16 | 3/4in.
with 1/4in.- 3/8in.Dr Extension and Extractor Rod.
With Spiral Gripping Edges to remove -
old / stripped / rusted or painted nuts and bolts.
Chrome molybdenum.

7pc Extractor Set for Damaged Star Screws
1/4in.Dr Socket Bits :
T10 | T15 | T20 x 37mm
T25 | T27 | T30 | T40 x 43mm
Chrome Vanadium Sockets.
S2 steel Bits.
Supplied with rail for easy storage.

8pc Extractor Set for Damaged Hex Screws
1/4in.Dr Socket Bits : 3 | 4 | 5 | 6mm x 37mm.
3/8in.Dr Socket Bits : 7 | 8 | 9 | 10mm x 50mm.
Chrome Vanadium Sockets.
S2 steel Bits.
Supplied with rail for easy storage.

2pc Tap Set
Size : M12 x 1.25p

2pc Tap Set
Size : M14 x 1.25p

2pc Adjustable Tap Socket Set - 3/8in.Dr
For use with Taps / Reamers / Screw Extractors
and other tools with a square shank.
Fits all common taps from 0 to 1/2in. / 3mm to 12mm.
Makes tapping and threading easier in tight workspaces.

3pc Ultra-Thin Flexible Diamond Coated File Set
Suitable for removing corrosion from
electrical connectors, terminals and contacts.
Blade Width : 6 | 9 | 15mm
Blade Length : 83mm
Ergonomic soft grip handle with hole for storage.
Ideal for Automotive Technicians / Electricians
Hobbyists and general DIY use.

Magnetic Cordless Power Tool Holder
Supports 3 cordless power tools with or without batteries.
Designed to latch onto any standard toolbox with raised lip.
With 3 strong rubber coated magnets on the lower support,
to keep the holder in place and protect the paintwork.
Manufactured from steel with a black powder coating.
Size : 295 x 250 x 130mm / L x W x D
Hole Diameter : 63mm.

Magnetic Spray Can Storage Tray
Fits 3 standard spray cans.
With 6 strong magnets.
Also 10 19mm holes in bottom of tray for screwdrivers etc.
Size : 210 x 75 x 70mm
Capacity : 1.8kg approx.

Magnetic Glove / Tissue Box Holder
For common latex glove or tissue boxes up to 143mm wide.
Steel construction with magnets to securely attach to any ferrous surface.
Additional screw holes allow for attachment to walls and work tops.
Dimensions : 253 x 143 x 95mm
Weight capacity : 3.6kg.

Steering Wheel Level
Wheel Size : 255mm to 350mm internal diameter.
For quick and accurate alignment of the steering wheel
before locking into position, prior to checking / adjusting the front wheel alignment.
Widely used in the assembly of steering wheels.
Can be used universally for most vehicles.
Features a level bubble to show horizontal position.

Vehicle Window Belt Moulding Removal Tool
Quickly removes the belt moulding
without damage to the window or moulding.
Will fit most vehicles.

20V Li-ion Brushless Impact Driver
with Brushless Motor
Includes Battery and 4.0Ah Faster Charger.
Voltage / Frequency : 20V DC | 105W | 50 / 60Hz
No Load Speed : 0-1600 / 0-2000 / 0-2600min -1
Max. Torque : 180 Nm
Impact Rate : 0 - 1800 / 0 - 2500 / 0 - 3300bpm
Driving Shank : 1/4in. Hex
Input Voltage : 21V DC 4.0A.
Charger : 230V

7pc Hole Saw Set
Diameters : 26 | 32 | 38 | 45 | 50 | 56 | 63mm
Working Depth : 18mm.
Saw Blade Material : 65Mn
For all drilling machines with hexagonal shaft mounting.
Suitable for hardwood and softwood / veneered wood and coated chipboard.

16pc Hook & Loop Hand Sanding Block Set
Assorted shape sanding blocks size : 100 x 40mm
Hand Pad with Hook and Loop interface
Tear Drop Sander
Ideal for crown moulding baseboards and woodworking
New improved design allows for quick and easy changing of shapes.

10in./ 250mm Plastering Scarifier

3M / 10ft Auto Lock Tape Measure
With 16mm Blade with metric and imperial markings.
Auto-lock with push button blade retraction.
Two-spike hook for taking precise measurements.
Impact resistant plastic case with soft grip outer.
With Magnetic Tip.

5M / 16ft Auto Lock Tape Measure
With 19mm Blade with metric and imperial markings.
Auto-lock with push button blade retraction.
Two-spike hook for taking precise measurements.
Impact resistant plastic case with soft grip outer.
With Magnetic Tip.

8M / 26ft Auto Lock Tape Measure
With 25mm Blade with metric and imperial markings.
Auto-lock with push button blade retraction.
Two-spike hook for taking precise measurements.
Impact resistant plastic case with soft grip outer.
With Magnetic Tip.

3 in 1 Quick Change Recip / Hacksaw Set
Quick Change Handle -
Dry Wall Blade for Wood : 6in. x 6 TPI
Blade for Metal / Wood and Plastic : 6in. x 18 TPI
Blade for Metal : 10in. x 24 TPI
Blade Material : BIM | 65Mn

Adjustable Mouth Block Plane
No. 60-1/2

Duplex Rebate Plane
No.78

7pc Carpenters Woodworking Tool Kit
No.4 Smoothing Bench Plane
No. 60-1/2 Adjustable Mouth Block Plane
Flat Spoke Shave
Try Square : 9in. / 225mm
Sliding Bevel : 9in./ 225mm
Marking Knife : 7in. / 175mm
Mortise & Marking Gauge : 6in. / 150mm
Supplied with a Handy Storage Case.

Brush and Roller Cleaner
Length : 390 - 540mm
Diameter : 32mm.
Steel Construction.
Cleans Brushes or Rollers Quickly and Thoroughly.
Extends the life of your painting tools.
Cleans paint brushes up to 100mm and all standard core paint rollers.
Simple push-pull action.
Ball bearing mechanism for smooth operation.

Red Baseball Cap with Neilsen Logo