New Products
VAG Oil Sump Plug Key

CT4749

Drain Plug Key - 1/4in.Dr

Oil Drain Plug Key - VAG
1/4in.Dr Plug Removal Tool
Specifically for the plastic sump plugs found on the latest VAG vehicles.
Applicable to VAG 2.0 litre 4 cylinder TDI GEN III engines
Audi | Seat Leon / 2013 | VW Golf Mk VII / 7
This plug is also suitable for the cam cover on the latest
1.6 and 2.0 twin cam diesel engines found in the VAG range.

VAG Oil Sump Plug Key
t Click picture for more information
VAG Oil Sump Plug Key

CT4673

Oil Drain Plug Wrench - VAG

Oil Drain Plug Wrench - VAG
For use on plastic oil drain plugs
Found on Audi | Seat | Skoda | VW vehicles
OEM : T10549

VAG Oil Sump Plug Key
t Click picture for more information
Self Adjusting Oil Filter Wrench Set

CT4625

Oil Filter Wrench Set - 4pc

4pc Adjustable Oil Filter Wrench Set
Use with a 3/8in.Drive Ratchet or Torque Wrench.
With Left handed and Right handed operation.
Spring Tensioned Jaws :
Small : 60mm to 80mm
Large : 80mm to 96mm
Silver : Right hand operation
Black : Left hand operation

Self Adjusting Oil Filter Wrench Set
t Click picture for more information
Oil Filter Key

CT4770

Oil Filter Key

Oil Filter Removal Tool
9.5mm | 3/8in. Square
for Mann / Mahle / Knecht oil filters found in
VW | Audi | Seat | Volvo vehicles
and other fuel filters where space is restricted.
With a robust T-shape head that fits in the filter removal slot

Oil Filter Key
t Click picture for more information
Oil Filter Offset Wrench Set

CT4771

Oil Filter Offset Wrench Set

5pc Oil Filter Offset Wrench Set
Sizes : 24mm | 27mm | 32mm | 36mm | 38mm
Low profile design with offset drive.
For oil filters where access is limited

Oil Filter Offset Wrench Set
t Click picture for more information
Clutch Alignment Tool Kit

CT4643

Clutch Alignment Tool Kit

Clutch Alignment Tool Kit
For clutch discs with 15 to 28 mm clutch hubs.
Provides accurate centring of the clutch disc
on most vehicles with or without pilot bearing.
Alignment according to friction surface of the clutch pressure plate.
Centring sleeve diameter : 12 | 14 | 15 | 16 | 17 | 18 | 19mm

Clutch Alignment Tool Kit
t Click picture for more information
Ducato Clutch Release Shaft Puller

CT4606

Clutch Release Shaft Puller

Release Shaft / Guide Rail Bolt Puller
For extracting the clutch release shaft on the Fiat Ducato with pulling clutch.
Required for clutch replacement and gearbox repair on 1994 models.
Includes puller body with M8 x 1.25 internal spindle thread pull clamp.
Also for extracting the chain guide rail bolt on BMW and Mercedes engines.
M6 x 1.0 bolt for removing the guide rail bolt

Ducato Clutch Release Shaft Puller
t Click picture for more information
19mm Steering Drop Arm Puller

CT4757

Steering Drop Arm Puller

19mm Puller for Land Rover Steering Drop Arms
For removing the steering drop arm from the steering box.
Over time the steering drop arm and box
can corrode together making it difficult to remove.
Using this tool will ensure the steering box spline shaft and oil seal will remain intact.

19mm Steering Drop Arm Puller
t Click picture for more information
24mm Steering Drop Arm Puller

CT4758

Steering Drop Arm Puller

24mm Puller for Land Rover Steering Drop Arms
For removing the steering drop arm from the steering box.
Over time the steering drop arm and box
can corrode together making it difficult to remove.
Using this tool will ensure the steering box spline shaft and oil seal will remain intact.

24mm Steering Drop Arm Puller
t Click picture for more information
Hydraulic Ball Joint Splitter

CT4645

Ball Joint Separator - Hydraulic

Hydraulic Ball Joint Splitter
Forged steel body ball joint splitter suitable for light commercial vehicles.
Use manually or with 1.5 Tonne hydraulic ram supplied.
Features a step down thread adaptor that allows fitting of the manual force screw.
Jaw Opening : 22mm

Hydraulic Ball Joint Splitter
t Click picture for more information
Brake Bleed Wrench Set

CT4759

Brake Bleed Wrench Set

6pc Brake Bleed Wrench Set
Sizes : 7 | 8 | 9 | 10 | 11 | 12mm - 12 point
Combined Wrench / Socket and Nipple Connector.
Ideal for bleeding brake and hydraulic clutch systems without removing the wheels.
1.2M silicon hose with check valve for safety operating.
For universal bleeder nipples.

Brake Bleed Wrench Set
t Click picture for more information
Brake Cylinder Adaptor Kit

CT4769

Brake Cylinder Adaptor Kit

Brake Cylinder Adaptor Kit
Adapters for Domestic and Import Vehicles.
Suitable for use with most Pressure Brake Bleeders.
Contains universal adapters for most makes and models.
Adapters fit 90% of current master cylinder reservoirs.

Brake Cylinder Adaptor Kit
t Click picture for more information
Brake Line Jig Set

CT4773

Brake Line Jig Set - 2pc

2pc Brake Line Jig Set
Clamp both new and old lines parallel
to each other to make exact copies.
A brake line can consist of many angles /
bends that should be correct for the new line to fit.
For steel / cooper and plastic coated brake lines
with 3/16in. or 1/4in.| 4.75mm to 6.3mm diameters.

Brake Line Jig Set
t Click picture for more information
Rear Axle Locking Nut Spanner

CT4762

Rear Axle Locking Nut Spanner

Rear Axle Locking Nut Spanner
For loosening and tightening the wheel bearing grooved lock nut
when replacing wheel bearings on rear axle shafts or full floating axles.
Applicable to : Mercedes Sprinter / W901 - W905 rear axles.
Can be used with a 1/2"Dr Ratchet or Power Bar.

Rear Axle Locking Nut Spanner
t Click picture for more information
VW Crafter Hub Nut Socket

CT4751

Hub Nut Socket - 74mm 3/4in.Dr

74mm Hub Nut Socket - 3/4in.Dr
for VW / GM and Mercedes Vans
Suitable for Volkswagen Crafter rear hub nuts
also fits Mercedes 511 twin rear wheel models
and GM Movano and Renault Vans.
S45C Steel

VW Crafter Hub Nut Socket
t Click picture for more information
Ford Transit Rear Hub Nut Socket

CT4764

Rear Hub Nut Socket

Rear Hub Nut Socket - Ford Transit
1/2in.Dr Heavy duty 4 point specialised impact socket
for removing the rear hub nut on RWD Ford Transit vehicles 2014 -.
Alignment shaft allows accurate location onto castellated nut.

Ford Transit Rear Hub Nut Socket
t Click picture for more information
Bearing Grooved Locknut Socket Set

CT4605

Grooved Locknut Socket Set - 13pc

13pc Special Socket Set
with Internal Teeth for Grooved Nuts
Sizes :18 | 22 | 25 | 28 | 32 | 38 | 45 | 52 | 58 | 65 | 70 | 75 | 80mm
For gently loosening and tightening groove nuts
60mm Long with 1/2in.Dr

Bearing Grooved Locknut Socket Set
t Click picture for more information
Wheel Lock Key Set - Audi

CT4152

Wheel Lock Key Set - Audi

20pc Unique Socket Set
Audi Wheel Locking Key Set
Special Sockets for removing locking
wheel nuts on Audi vehicles.
use with a 17mm Alloy Wheel Nut Socket
Equivalent to OEM T40073

Wheel Lock Key Set - Audi
t Click picture for more information
Wheel Lock Key Set - GM

CT4765

Wheel Locking Nut Key Set - GM

20pc Unique Socket Set for Vauxhall Locking Wheel Nuts
For removing GM Vauxhall locking wheel nuts on -
Agila | Astra F/G/H | Calibra | Corsa B/C/D |
Meriva | Omega B | Signum | Speedster |
Tigra A/B | Vectra B/C | Zafira A/B.
Vauxhall Wheel Lock Nut Keys equivalent to
OEM Z16512-101 to Z16512-120
Use with a 17mm wheel nut socket and power bar.

Wheel Lock Key Set - GM
t Click picture for more information
Wheel Lock Key Set - GM

CT4766

Wheel Locking Nut Key Set - GM

20pc Unique Socket Set for Vauxhall Locking Wheel Nuts
For removing GM Vauxhall locking wheel nuts on -
Agila | Astra F/G/H | Calibra | Corsa B/C/D |
Meriva | Omega B | Signum | Speedster |
Tigra A/B | Vectra B/C | Zafira A/B.
Vauxhall Wheel Lock Nut Keys equivalent to
OEM Z16512-121 to Z16512-140
Use with a 17mm wheel nut socket and power bar.

Wheel Lock Key Set - GM
t Click picture for more information
Wheel Lock Key Set - GM

CT4767

Wheel Locking Nut Key Set - GM

20pc Unique Socket Set for Vauxhall Locking Wheel Nuts
For removing GM Vauxhall locking wheel nuts on -
Agila | Astra F/G/H | Calibra | Corsa B/C/D |
Meriva | Omega B | Signum | Speedster |
Tigra A/B | Vectra B/C | Zafira A/B.
Vauxhall Wheel Lock Nut Keys equivalent to
OEM Z16512-181 to Z16512-200
Use with a 17mm Alloy Wheel Nut Socket.

Wheel Lock Key Set - GM
t Click picture for more information
Wheel Lock Key Set - Land Rover

CT4768

Wheel Locking Nut Key Set - 10pc

10pc Land Rover Wheel Locking Nut Key Set
Master Set of Tamper Proof Sockets
for removing the locking wheel nuts on Land Rover vehicles.
Hex Drive - Identified with : A | B | C | D | E | F | G | H | I | J.
Use with a 27mm Spanner or Socket
NOT for use with Impact Tools.

Wheel Lock Key Set - Land Rover
t Click picture for more information
Wheel Lock Key Set - Porsche

CT4151

Wheel Lock Key Set - Porsche

20pc Unique Socket Set
Porsche Wheel Locking Key Set
Multi-Spline Sockets for removing
Porsche locking wheel nuts.
Also suitable for VW Touareg.
Use with a 19mm Alloy Wheel Nut Socket
Equivalent to OEM T10190

Wheel Lock Key Set - Porsche
t Click picture for more information
Wheel Lug Nut Socket - Mercedes

CT4499

Wheel Nut Socket - Hyundai

Special Wheel Nut Socket
21mm | 1/2in.Dr | 87mm Deep.
For special profiles on Hyundai i30 / Tucson and KIA.
With borehole for locking pin or safety spring and grove for O-ring.
Protective sleeve for alloy wheels.
Chrome-Molybdenum.

Wheel Lug Nut Socket - Mercedes
t Click picture for more information
12V Trailer / Vehicle Electrics Tester

CT4691

Trailer / Vehicle Electrics Tester

Trailer / Vehicle Tester
For checking 12V electrical system towing connections
Suitable for 7 and 13 pin connectors.
Adapters : 7 to 13 pin and 13 to 7 pin
Requires 9V Battery / not included.

12V Trailer / Vehicle Electrics Tester
t Click picture for more information
Air Blow Duster Gun

CT4692

Air Blow Gun

Air Blow Duster Gun
With 110mm nozzle and Air Flow Regulator
1/4in. air connector
Operating Pressure : 6.3 bar
Optional hose attachment on top of the gun
Non-slip handle

Air Blow Duster Gun
t Click picture for more information
Air Blow Duster Gun

CT4693

Air Blow Gun

Air Blow Duster Gun with Venturi Nozzle
High air flow at low air consumption
Working pressure : 3 - 12 bar
Air consumption : 475 l/min
Air inlet : 1/4in

Air Blow Duster Gun
t Click picture for more information
Air Blow Duster Gun with Hose

CT4696

Air Blow Gun with Hose

Air Duster Gun Set
3.5M Nylon Hose
Zinc Body with Brass Connector
Max. Pressure : 115psi / 8bar

Air Blow Duster Gun with Hose
t Click picture for more information
Tyre Inflator with Rotating Gauge

CT1371

Tyre Inflator and Gauge

Tyre Inflator and Pressure Gauge
with 360 degree Rotataing Gauge
0 - 220 psi
0 - 16 BAR
Rubber Protected 70mm Dial Gauge with Pistol Grip

Tyre Inflator with Rotating Gauge
t Click picture for more information
Mini Composite Impact Wrench

CT3950

Mini Impact Wrench - 1/2in.Dr

1/2in.Dr Mini Composite Impact Wrench
Max Torque : 500 ft-lb | 814Nm
Free Speed : 10000rpm
Air Consumption : 30 SCFM
Weight : 1.25kg
Length : 117mm
Air Inlet - 1/4in.
Hose Size - 3/8in.
Air Pressure : 90psi

Mini Composite Impact Wrench
t Click picture for more information
Air Ratchet

CT2283

Air Ratchet - 1/2in.Dr

Air Ratchet - 1/2in.Dr
Composite Body
Torque - 75 ft-lb
Free Speed - 180 rpm
Weight - 1.3kg
Length - 265mm
Air Inlet - 1/4in.
Hose Size - 3/8in.

Air Ratchet
t Click picture for more information
Air Cut-off Tool

CT2278

Air Cut-off Tool - 75mm

3in. / 75mm Air Cut-off Tool
Composite Body
Free Speed - 20000rpm
Weight - 0.85kg
Length - 200mm
Air inlet - 1/4in.
Hose Size - 3/8in.

Air Cut-off Tool
t Click picture for more information
Air Die Grinder

CT2279

Air Grinder

1/4in. Composite Body Air Die Grinder
Collet Size - 1/4in. / 6mm
Free Speed - 22000 rpm
Air Consumption - 23 SCFM
Weight - 0.69kg
Length - 190mm
Air Inlet - 1/4in.
Hose Size - 1/4in.

Air Die Grinder
t Click picture for more information
Spray Gun Cleaning Kit

CT4656

Spray Gun Cleaning Kit

Spray Gun Cleaning Kit
Ideal for cleaning all types of Spray Guns such as -
Suction / Gravity Feed / HVLP / Detail / Pressure and Airbrushes.
Long Wire Handle Brushes : Angled and Straight
Fine / Medium and Detail Brushes
Brass Brush
Hobby Knife Handles and Fine Points
Nylon Hand Brush
Cleaning Solution.

Spray Gun Cleaning Kit
t Click picture for more information
High Performance Spray Gun

CT4695

Spray Gun - 600ml

High Performance Spray Gun
Working Pressure : 2.0 - 2.2bar
Air Consumption : 265 l/min at 2.0bar
Spray Pattern : 210mm at 180mm distance
Cup Capacity : 600ml
Chrome Mirror Finish Body with Copper Valve
Ideal for Automotive use and Industrial projects.
Low Pressure good for the environment.

High Performance Spray Gun
t Click picture for more information
6 Dent Puller Pads - Round and Oval

CT4785

Dent Puller Pads

6pc Dent Puller Pad Set
Replacement puller pads
for dent repair kit CT3789
3 x 35mm Round pads
3 x 16 x 32mm Oval pads

6 Dent Puller Pads - Round and Oval
t Click picture for more information
Pry Bar Set

CT4672

Pry Bar Set - 4pc Heavy Duty

4pc Pry Bar Set
Straight Bar : 925mm long
Bent Bar : 925mm long 30 degrees
Bent Bar : 610mm long 70 degrees
Bent Bar : 630mm long 90 degrees
with Rubber coated soft grips.
For use on trucks and large vehicles.

Pry Bar Set
t Click picture for more information
Utility Tool Cart with 3 Shelves

CT4714

Tool Cart - 3 Shelves

3 Self Utility Cart
Size : 890 x 545 x 980mm with wheels attached.
Capacity : 30kgs per shelf and 100kg fully loaded.
Panels : 0.8mm thick with 10mm square holes / 38mm apart.
Wheels : 100 x 32mm / 2 fixed and 2 swivel with brake.
Red / Black powder coated finish.

Utility Tool Cart with 3 Shelves
t Click picture for more information
Headlamp Wrench - VAG

CT4750

Headlamp Wrench - VAG

VAG Multi-Spline Headlamp Wrench
Unique tool for adjusting the front headlamps on VAG vehicles.
Applicable to :
Audi A4 | A5 | A6 |
VW Passat / Touareg

Headlamp Wrench - VAG
t Click picture for more information
Headlight Adjustment Wrench

CT4772

Headlight Adjustment Wrench

Mercedes Headlight Adjusting Wrench
14mm Hex | 3/8in.Dr | Length 195mm.
Ideally suited to areas with very restricted access.
For adjusting the headlights or clearance from bumpers and bonnet on
Audi A7 and Mercedes C-class / W205 - 2014 onwards.

Headlight Adjustment Wrench
t Click picture for more information
Wiper Arm Removal Tool Set

CT4530

Wiper Arm Puller Set - 6pc

6pc Wiper Arm Puller Set
Provides various options for removing windscreen wiper arms.
Heavy duty for loosening the tightest of components.
Brass cap helps prevents damage.
Suitable for most vehicles and vans.

Wiper Arm Removal Tool Set
t Click picture for more information
Alpha Numeric Punch Set

CT4320

Alpha Numeric Punch Set

Letter and Number Punches
Letters A - Z / Numerals 0 - 9
5mm Shank

Alpha Numeric Punch Set
t Click picture for more information
Tap Extractor Set

CT4708

Tap Extractor Set - 9pc

9pc Tap Extractor Set
Utilises the flutes of a broken tap to safety remove it.
Sizes : M5 | M6 | M8 | M10 | M12 | M14 | M16 | M18-M20 | M22.
With 3 and 4 flute design.

Tap Extractor Set
t Click picture for more information
Professional Soldering Set

CT4774

Gas Soldering Set - Professional

Professional Soldering Set
Piezo Ignition Soldering Iron & Hot Air Torch
90W - 150W equivalent electrical power.
With accessories -
Chisel Tip / Anvil Tip / Flat Tip / Deflector / Solder Tube / Cleansing Sponge
Automotive / Workshop / DIY / Hobby
Applications :
Soldering / Heating / Heat Shrinking and Paint Removal
TUV Rhineland certified

Professional Soldering Set
t Click picture for more information
Portable Heat Shrink Kit

CT4776

Portable Heat Shrink Kit

162pc Portable Heat Shrink Kit
with Gas Torch and Assorted Sleeves
Sleeve Sizes : 1.5 | 2.5 | 3.5 | 5.0 | 6.0 | 10.0 | 15.0
TUV Approved Gas Torch

Portable Heat Shrink Kit
t Click picture for more information
Gas Blow Torch Head - CGA600 Cylinders

CT4775

Gas Blow Torch Head

Gas Blow Torch Head
Independent Blow Torch Nozzle
Which can be connected to both Propane and MAPP Gas CGA600 Cylinders.
With piezo ignition and a wide range of flame adjustments.
Manual safety lock for enhanced safety.
Suitable for a variety of Soldering and Welding applications.

Gas Blow Torch Head - CGA600 Cylinders
t Click picture for more information
Generator / Welder / Compressor

CT4539

Generator / Welder and Compressor

Petrol Generator / Welder and Compressor
15Hp 4-Stroke OHV Air cooled.
Generator Rated Current : 4.0KW for 230V AC / 2.0KW for 115V AC
Welder - Max rated welding current : 180A
Max load voltage : 27.2V
Electrode Diameter : 2.6-4.0mm
Compressor - Max. pressure: 8 bar
Rated power: 1.1KW

Generator / Welder / Compressor
t Click picture for more information
Generator

CT1846

Generator - Petrol 13Hp

13Hp Petrol Generator
Rated Output : 5.0KW
Max. Output : 5.5KW
Displacement : 389cc
Fuel Capacity : 25 litres
Continuous Operation Time : 10H
Oil Capacity : 1.1L
Electric Start with 12V / 17A Battery

Generator
t Click picture for more information
7pc HSS Twist Drill Set

CT4678

Drill Set - 7pc HSS

7pc HSS Twist Drill Set
Sizes : 2.5 | 3.3 | 4.2 | 5.0 | 6.8 | 8.5 | 10.2mm
for M3 - M12 Taps

7pc HSS Twist Drill Set
t Click picture for more information
SDS-Max to SDS-Plus Adaptor

CT4723

SDS-Max to SDS-Plus Arbor

SDS-Max to SDS-Plus Adapter for Rotary Hammers
Allows SDS-Plus bits to be used in a SDS-Max Tool.
For most Rotary and Demolition Hammers.
Heavy duty steel construction for long life time.
Length : 220mm

SDS-Max to SDS-Plus Adaptor
t Click picture for more information

Product Search

Search Icon
Section 1 Icon Section 2 Icon Section 3 Icon Section 4 Icon Section 5 Icon Section 6 Icon Section 7 Icon Section 8 Icon Section 9 Icon Section 10 Icon

© Cannon Tools Limited  -  2017 All Rights Reserved   •  20 Station Road,  Rowley Regis,  West Midlands,  B65 0JU,  United Kingdom  |  T +44 (0) 121 561 6760