New Products
Wheel Lock Key Set - GM

CT4767

Wheel Locking Nut Key Set - GM

20pc Unique Socket Set for Vauxhall Locking Wheel Nuts
For removing GM Vauxhall locking wheel nuts on -
Agila | Astra F/G/H | Calibra | Corsa B/C/D |
Meriva | Omega B | Signum | Speedster |
Tigra A/B | Vectra B/C | Zafira A/B.
Vauxhall Wheel Lock Nut Keys equivalent to
OEM Z16512-181 to Z16512-200
Use with a 17mm Alloy Wheel Nut Socket.

Wheel Lock Key Set - GM
t Click picture for more information
Wheel Lock Key Set - Land Rover

CT4768

Wheel Locking Nut Key Set - 10pc

10pc Land Rover Wheel Locking Nut Key Set
Master Set of Tamper Proof Sockets
for removing the locking wheel nuts on Land Rover vehicles.
Hex Drive - Identified with : A | B | C | D | E | F | G | H | I | J.
Use with a 27mm Spanner or Socket
NOT for use with Impact Tools.

Wheel Lock Key Set - Land Rover
t Click picture for more information
Wheel Lock Key Set - Porsche

CT4151

Wheel Lock Key Set - Porsche

20pc Unique Socket Set
Porsche Wheel Locking Key Set
Multi-Spline Sockets for removing
Porsche locking wheel nuts.
Also suitable for VW Touareg.
Use with a 19mm Alloy Wheel Nut Socket
Equivalent to OEM T10190

Wheel Lock Key Set - Porsche
t Click picture for more information
Wheel Lug Nut Socket - Mercedes

CT4499

Wheel Nut Socket - Hyundai

Special Wheel Nut Socket
21mm | 1/2in.Dr | 87mm Deep.
For special profiles on Hyundai i30 / Tucson and KIA.
With borehole for locking pin or safety spring and grove for O-ring.
Protective sleeve for alloy wheels.
Chrome-Molybdenum.

Wheel Lug Nut Socket - Mercedes
t Click picture for more information
Air Blow Duster Gun

CT4692

Air Blow Gun

Air Blow Duster Gun
With 110mm nozzle and Air Flow Regulator
1/4in. air connector
Operating Pressure : 6.3 bar
Optional hose attachment on top of the gun
Non-slip handle

Air Blow Duster Gun
t Click picture for more information
Air Blow Duster Gun

CT4693

Air Blow Gun

Air Blow Duster Gun with Venturi Nozzle
High air flow at low air consumption
Working pressure : 3 - 12 bar
Air consumption : 475 l/min
Air inlet : 1/4in

Air Blow Duster Gun
t Click picture for more information
Air Blow Duster Gun with Hose

CT4696

Air Blow Gun with Hose

Air Duster Gun Set
3.5M Nylon Hose
Zinc Body with Brass Connector
Max. Pressure : 115psi / 8bar

Air Blow Duster Gun with Hose
t Click picture for more information
Tyre Inflator with Rotating Gauge

CT1371

Tyre Inflator and Gauge

Tyre Inflator and Pressure Gauge
with 360 degree Rotataing Gauge
0 - 220 psi
0 - 16 BAR
Rubber Protected 70mm Dial Gauge with Pistol Grip

Tyre Inflator with Rotating Gauge
t Click picture for more information
High Performance Spray Gun

CT4695

Spray Gun - 600ml

High Performance Spray Gun
Working Pressure : 2.0 - 2.2bar
Air Consumption : 265 l/min at 2.0bar
Spray Pattern : 210mm at 180mm distance
Cup Capacity : 600ml
Chrome Mirror Finish Body with Copper Valve
Ideal for Automotive use and Industrial projects.
Low Pressure good for the environment.

High Performance Spray Gun
t Click picture for more information
6 Dent Puller Pads - Round and Oval

CT4785

Dent Puller Pads

6pc Dent Puller Pad Set
Replacement puller pads
for dent repair kit CT3789
3 x 35mm Round pads
3 x 16 x 32mm Oval pads

6 Dent Puller Pads - Round and Oval
t Click picture for more information
Headlamp Wrench - VAG

CT4750

Headlamp Wrench - VAG

VAG Multi-Spline Headlamp Wrench
Unique tool for adjusting the front headlamps on VAG vehicles.
Applicable to :
Audi A4 | A5 | A6 |
VW Passat / Touareg

Headlamp Wrench - VAG
t Click picture for more information
Headlight Adjustment Wrench

CT4772

Headlight Adjustment Wrench

Mercedes Headlight Adjusting Wrench
14mm Hex | 3/8in.Dr | Length 195mm.
Ideally suited to areas with very restricted access.
For adjusting the headlights or clearance from bumpers and bonnet on
Audi A7 and Mercedes C-class / W205 - 2014 onwards.

Headlight Adjustment Wrench
t Click picture for more information
Wiper Arm Removal Tool Set

CT4530

Wiper Arm Puller Set - 6pc

6pc Wiper Arm Puller Set
Provides various options for removing windscreen wiper arms.
Heavy duty for loosening the tightest of components.
Brass cap helps prevents damage.
Suitable for most vehicles and vans.

Wiper Arm Removal Tool Set
t Click picture for more information
Professional Soldering Set

CT4774

Gas Soldering Set - Professional

Professional Soldering Set
Piezo Ignition Soldering Iron & Hot Air Torch
90W - 150W equivalent electrical power.
With accessories -
Chisel Tip / Anvil Tip / Flat Tip / Deflector / Solder Tube / Cleansing Sponge
Automotive / Workshop / DIY / Hobby
Applications :
Soldering / Heating / Heat Shrinking and Paint Removal
TUV Rhineland certified

Professional Soldering Set
t Click picture for more information
Portable Heat Shrink Kit

CT4776

Portable Heat Shrink Kit

162pc Portable Heat Shrink Kit
with Gas Torch and Assorted Sleeves
Sleeve Sizes : 1.5 | 2.5 | 3.5 | 5.0 | 6.0 | 10.0 | 15.0
TUV Approved Gas Torch

Portable Heat Shrink Kit
t Click picture for more information
Gas Blow Torch Head - CGA600 Cylinders

CT4775

Gas Blow Torch Head

Gas Blow Torch Head
Independent Blow Torch Nozzle
Which can be connected to both Propane and MAPP Gas CGA600 Cylinders.
With piezo ignition and a wide range of flame adjustments.
Manual safety lock for enhanced safety.
Suitable for a variety of Soldering and Welding applications.

Gas Blow Torch Head - CGA600 Cylinders
t Click picture for more information
230V 100mm Biscuit Jointer

CT0957

Biscuit Jointer - 230V 100mm

Biscuit Jointer - 100mm
Power / Voltage : 900W / 230V / 50Hz
No load speed : 10800rpm
TCT Blade : 100mm Diameter with 6 Teeth
Max. Material Thickness : 0 - 30mm
For Biscuit Sizes : 0 | 10 | 20
Fine Depth Adjustment : 3 | 10 | 12.3 | 19mm
Fence Angle Setting : 0 - 90 / 90 - 135 degrees
With dust collection bag / hex key and spare carbon brush.

230V 100mm Biscuit Jointer
t Click picture for more information
115mm Angle Grinder - 110 Volt

CT1869

Angle Grinder - 115mm 110V

115mm Angle Grinder - 110V
Input power : 850W
Frequency : 60Hz
No-load speed - 12000rpm
Disc diameter - 4.5in. / 115mm

115mm Angle Grinder - 110 Volt
t Click picture for more information
Wire Brush with 2 Handles

CT4825

Wire Brush with 2 Handles

2 Handled Wire Brush
Hard Plastic Body with Soft Rubber Grip and Carbon Steel Bristles

Wire Brush with 2 Handles
t Click picture for more information
Hand Sanding Block

CT4826

Hand Sanding Block

Sanding Block
Plastic 90 x 165mm
With clamping mechanism to hold sanding paper securely
Plastic body with foam pad
Supplied with 5 - 92 x 222mm Sand Paper Sheets

Hand Sanding Block
t Click picture for more information
Rule with Spirit Levels

CT4831

Rule with Spirit Levels - 600mm

600mm Rule with Spirit Levels
3 in 1 Trimmer / Leveller and Measure
Stainless Steel Rule with measurements in Metric and Inches
Anti-slip handle with 2 spirit level vials

Rule with Spirit Levels
t Click picture for more information
Paint Brush and Roller Cleaner

CT4830

Paint Brush and Roller Cleaner

Paint Brush and Roller Cleaner
Metal teeth interlock to rake paint from your brush or roller
Helps to save water during the cleanup process.

Paint Brush and Roller Cleaner
t Click picture for more information
Paint Can and Accessory Set

CT4833

Paint Can and Accessory Set - 3pc

3pc Paint Can Accessory Set
Paint Can Opener and Mixer with Roller cleaner
Handy tools designed specifically for quick and easy use.
Great for professional decorators and the DIY enthusiast.
Ideal for paint or varnish.

Paint Can and Accessory Set
t Click picture for more information
Wood Scraper

CT4828

Wood Scraper

Larger Wood Scraper with Knob
For scraping paint or varnish from wood and plastic.
4 scraping edges for both smooth and rough surface.
With Soft grip handle and 65mm wide blade

Wood Scraper
t Click picture for more information
Jab Saw / Wall Board Saw

CT4827

Jab Saw - 6.5in.

Dry Wall / Plasterboard Saw
With Soft Grip Handle and 165mm Blade
Extra sharp teeth and pointed end for piercing plasterboard.
Heavy duty high carbon steel and heat treated blade.

Jab Saw / Wall Board Saw
t Click picture for more information
Heavy Duty Steel Spring Clamp

CT4660

Spring Clamp- 6in.

6in. / 150mm Spring Clamp
Jaw Capacity - 80mm
Heavy duty rubber non-slip grip.
Rugged steel clamp with heavy duty spring.
Hinged jaws for a better grip on uneven surfaces.

Heavy Duty Steel Spring Clamp
t Click picture for more information
Grout Finishing Kit with Brush

CT4832

Grout Finishing Kit with Brush

4pc Grout Cleaner and Finishing Kit
Perfect corners and seamless joints.
Includes Brush with Scraper and 3 Finishing Tools
which offer a variety of edges and shapes.
Quick and easily repair old sealant or grout.
For all caulks sealants and grout.

Grout Finishing Kit with Brush
t Click picture for more information
Nylon Spandex Gloves

CT4712

Nylon Spandex Gloves - 9

Nylon Spandex Gloves
Size : 9 Large
with special latex micro-foam coating and seamless knitted collar.
Breathable with Enhanced Grip for fatigue-free work.
Priced individual but sold in pairs of 12

Nylon Spandex Gloves
t Click picture for more information
Nylon Spandex Gloves

CT4713

Nylon Spandex Gloves - 10

Nylon Spandex Gloves
Size : 10 Extra Large
with special latex micro-foam coating and seamless knitted collar.
Breathable with Enhanced Grip for fatigue-free work.
Priced individual but sold in pairs of 12

Nylon Spandex Gloves
t Click picture for more information
Anti-Cut HPPE Gloves

CT4744

Anti-Cut HPPE Gloves - 9

13 Gauge HPPE liner Anti-CUT gloves
Size : 9 Large
CE standard level 5 cut resistant gloves.
Reduces the harm from danger of sharp objects.
HPPE liner with PU coating
Priced individual but sold in pairs of 12

Anti-Cut HPPE Gloves
t Click picture for more information
Anti-Cut HPPE Gloves

CT4745

Anti-Cut HPPE Gloves - 10

13 Gauge HPPE liner Anti-CUT gloves
Size : 10 Extra Large
CE standard level 5 cut resistant gloves.
Reduces the harm from danger of sharp objects.
HPPE liner with PU coating
Priced individual but sold in pairs of 12

Anti-Cut HPPE Gloves
t Click picture for more information
14.4V Cordless Horse Clippers

CT3656

Animal Shears / Horse Clippers

Cordless Horse Clippers
Voltage : 14.4V Li-ion
Power Output : 45W
Blade Speed : 2300rpm
Adjustable blade pressure.
Up to 80 minutes running time on a full charge.
Includes : Spare battery and 230V Charger
Low noise and vibration.
Convenient cordless clippers suitable for cattle and horses.

14.4V Cordless Horse Clippers
t Click picture for more information
Horse Clippers

CT2767

Animal Shears / Horse Clippers

Horse Clippers
Voltage : 230V / 50Hz
Power output : 350W
Blade speed : 1800 - 2700rpm / 6 speed
Hi-speed cuts through thick coarse dry hair.
Precision built to run quiet and cool
Perfect for tapering / texturing and all round styling.
With spare blades / lubricating oil / cleaning brush / Screwdriver and pendulum.

Horse Clippers
t Click picture for more information

Product Search

Search Icon
Section 1 Icon Section 2 Icon Section 3 Icon Section 4 Icon Section 5 Icon Section 6 Icon Section 7 Icon Section 8 Icon Section 9 Icon Section 10 Icon

© Cannon Tools Limited  -  2017 All Rights Reserved   •  20 Station Road,  Rowley Regis,  West Midlands,  B65 0JU,  United Kingdom  |  T +44 (0) 121 561 6760