Section 5.8

Cylinders & Pistons

Cylinder

CT3614

Cylinder Head Service Kit

Universal Valve Spring Compressor
Complete upper engine service kit
enables in-situ removal and replacement of
valve springs / guides and seals
Suitable for 8 | 16 and 24 valve engines.
With Collet Tool | Valve Stem Seal Pliers
and Valve stem seal replacement kit

Cylinder Head Service Kit
t Click picture for more information
Universal

CT4865

Valve Spring Installation Kit

Universal Valve Spring Installation Kit
Ideal for use in restricted space conditions.
Specially designed to remove / install the valve springs
and oil seals in most vehicles by using pressurized air to close the valve ports.
Suitable for BMW / Ford / Mercedes / Mitsubishi / Toyota and VAG vehicles.

Universal Valve Spring Service Kit
t Click picture for more information
Air

CT5864

Valve Spring Compressor Kit

Air Valve Spring Compressor Set
Prevents the engine valve from falling into the body
due to counter pressure caused by air delivered via a spark plug-thread.
Suitable for spark plug threads M14 x 1.25 and M18 x 1.5
Extensive accessories.
Operates with 10mm / 3/8in. drive T-handle or Ratchet

Air Valve Spring Compressor Set
t Click picture for more information
PSA

CT5126

Valve Spring Tensioning Tool

PSA Valve Spring Tension Tool
for Citroen / Peugeot Vehicles
Suitable for 1.0 | 1.1 | 1.4 | 1.6 Petrol Engines in -
Citroen Xsara and Berlingo
Peugeot 106 | 205 | 206 | 306 | 307 | 405

PSA Valve Spring Tensioning Tool
t Click picture for more information
Valve

CT5561

Valve Seat Cutter Set - 11pc

11pc Valve Seat Cutter Set
with T-Handle
5 Milling Heads : 32.5 | 35 | 37.5 | 40 | 42.5mm
5 Stem Guides : 6.5 | 7 | 7.5 | 8 | 8.5mm
NOT suitable for hardened valve seats.
Ideal for Vintage Cars and Motorcycles.

Valve Seat Cutter Set - 11pc
t Click picture for more information
2

CT5651

Cylinder Head Stands - 2pc

2 Cylinder Head Stands
Support stands that locate into the cylinder head via the stud holes
Provides the clearance between head and workbench when reaming valve guides.

2 Cylinder Head Support Stands
t Click picture for more information
Guide

CT5937

Guide Rail Pin Puller

Guide Rail Pin Puller - Mercedes Benz / BMW
For Removing Stubborn Pins from Cylinder Heads
Ideal for those tight problem areas.
85mm puller incorporates a thrust bearing to ease the pulling action.
Screws : 2 - M8 x 1.25 | 29mm deep
2 - M8 x 1.25 / M6 x 1.0 | 29mm deep
2 - M8 x 1.25 / M5 x 0.8 | 29mm deep

Guide Rail Pin Puller
t Click picture for more information
Cylinder

CT4175

Cylinder Head Re-build Kit - Diesel

VAG / Porsche Diesel Head Rebuild Jig
for fitting camshafts into cylinder heads during head rebuilds.
Applicable to VAG and Porsche vehicles with diesel engines
Now in a EVA tray.

Cylinder Head Re-build Kit
t Click picture for more information
Engineers

CT5847

Precision Straight Edge

600mm Precision Straight Edge
Engineered for checking distortion in cylinder heads / engine blocks.
Suitable for us on engines up to 6 cylinders.
Also used in conjunction with feeler gauges.

Engineers Precision Straight Edge
t Click picture for more information
VW

CT3394

Water Pump Removal Kit - VAG

VAG Water Pump Removal Kit
This kit is essential for the removal of the water pump
and the alignment of the engine at top dead centre
on Transporter and Touareg vehicles
For 2.5L 5-cylinder TDI engines.

VW Water Pump Removal Kit
t Click picture for more information
Block

CT1133

Block Tester Kit

Block Tester Kit
With Block Tester Powder
Detects exhaust gasses in radiators
and so checks for gasket damage
or cracked and warped cylinders.
Works with Petrol engines.
Not recommended for Diesel vehicles

Block Tester Kit
t Click picture for more information
Combustion

CT3923

Block Tester Kit - 7pc

7pc Block Tester Kit
Detects exhaust gasses in the radiator
and checks for gasket damage also cracked or warped cylinders.
Works with Petrol | Diesel and Gas powered vehicles.
Use with combustion leak detector fluid - not included.
Suitable for use with sets - CT1585 and CT3380.

Combustion Leakage Tester
t Click picture for more information
Block

CT1137

Block Tester Powder

Block Tester Powder and Bottle
For use with Block Tester Kit CT1133 and CT3923

Block Tester Powder
t Click picture for more information
Brake

CT2756

Cylinder Hone

Brake Cylinder Hone
20 - 64mm | 3/4 to 2-1/2in. diameter
Flexible shaft for ease of use and self centring.

Brake Cylinder Hone
t Click picture for more information
Cylinder

CT2757

Cylinder Hone

Cylinder Hone
with 75mm / 3in. Abrasive Stones
Range : 51 - 177mm / 2 to 7in. Bore Diameter
Flexible shaft for ease of use and self centring

Cylinder Hone
t Click picture for more information
Replacement

CT4809

Cylinder Hone - 3 Replacement Stones

Replacement Abrasive Stones
for CT2757 Cylinder Hone

Replacement Stones for Cylinder Hone
t Click picture for more information
Rigid

CT3003

Scraper - Offset

32mm Rigid Offset Scraper

Rigid Offset Scraper
t Click picture for more information
Scraper

CT3302

Scraper Set - 3pc

3pc Scraper Set
Sizes : 10mm x 270mm | 25mm x 220 and 310mm
Ideal for De-carbonising cylinder heads / pistons and other engine parts.
Chrome-Vanadium

Scraper Set
t Click picture for more information

Product Search

Search Icon
Section 1 Icon Section 2 Icon Section 3 Icon Section 4 Icon Section 5 Icon Section 6 Icon Section 7 Icon Section 8 Icon Section 9 Icon Section 10 Icon

Cannon Tools Limited   •  20 Station Road,  Rowley Regis,  West Midlands,  B65 0JU,  United Kingdom

 T +44 (0) 121 561 6760