Wheel Bearing and Seal Installation Kit
New lightweight design to prevent damaging the bearing or housing.
Contains 3 metal bearing drift sleeves
and 34 nylon drifts with Deadblow Hammer.
Can also be used to install oil seals.
Fits most modern vehicles

51pc Bearing and Bushing Seal Master Driver Set
Suitable for mounting bearings | bushings and sealing rings.
220mm knurled handle grip for use with a hammer.
Particularly useful when used with a hydraulic press.
Support Disc - 74 mm |

Wheel Bearing Lock Nut Wrench
Adjustable jaws with locking feature
to suit both hexagon and octagon wheel bearing lock nuts.
6 point lock nuts 49 - 135mm
8 point lock nuts 49 - 143mm
Pin diameters 6mm / 8mm / 10mm

68mm Bearing Inner Ring Puller
For removing the inner wheel bearing rings on wheel hubs.
The bearing rings usually remain on the wheel hub
when the wheel bearings are removed.
Integral Clamp holds the puller legs
securely behind the component to be removed.
Pressure piece diameter : 25 x 30mm
Puller width : 68mm
Puller depth : 60 mm

Bearing Extractor Set - 16pc Puller and Slide-Hammer
Screw Adaptors - M6 x 1.0 / M8 x 1.25 / M10 x 1.5
Collets - 8 - 11mm / 12 - 17mm / 18 - 23mm / 24 - 29mm
30 - 34mm / 34 - 38mm / 39 - 43mm / 44 - 48mm / 49 - 53mm / 54 - 58mm

3pc Bearing Puller Set
Sizes : 3 | 4 | 6in. with Reversible 3 Leg Jaw

5pc Bearing Puller Set
Bearing extractor collets with internal capacity from 11 to 32mm Collets : 10 - 14mm | 15 - 19mm | 18 - 25mm | 25 - 32mm
3/8 - 1/2in. | 9/16 - 11/16in. | 5/8 - 1in. | 1 - 1-1/4in.
Slide Hammer - 377mm / 0.85kg

5pc Wheel Bearing Puller Set
Internal and External 3-Jaw Pullers
External puller 15mm - 80mm
Small Internal puller 15mm - 30mm
Large Internal puller 30mm - 80mm
Slide Hammer to aid pulling out the bearing.

9pc Bearing Puller Set
Removes gears / pulleys and steering wheels.
3lb Slide Hammer with T-handle - 390mm
8 - 10 | 10 - 12 | 12 - 14 | 15 - 17 and
17 - 20 | 20 - 24 | 25 - 29 | 30 - 32mm

31pc Wheel Hub and Bearing Service Tool Set
Allows Servicing to the wheel hub and wheel bearings.
Pressure Plates -
50 | 55 | 59 | 63.3 | 66.6 | 70.3 | 71.5 | 73.1 | 73.4 | 74.8 | 77.5 | 81.5 | 83.4mm
Sleeves with following diameters : 76 | 86 | 91 | 102mm
Extractor bolts M12 x 1.5 | M14 x 1.5
Spindle 7/8 x 300mm including thrust bearing
Pressure nut 32 x 60mm and Pressure sleeve 38 x 40mm

Bearing Separator Set
2 Sizes : 50 and 75mm
4 Sets of Hex Push-Puller Legs and Bar-Type Puller Head
125mm Puller Cross-Bar with 160mm Forcing Screw

14pc Bearing Splitter and Gear Puller Set
With various threaded connector bolts | Bearing Separators | Pawls and Push Rod

Bearing Separator
Drop forged
Clamping Width : 46mm - 230mm max
Clamping Bolt Length : 350mm / Distance : 224mm / Thread : M25 x 2.5
Puller Bolt : 3/4in. x 10 UNC
Puller Bolt distance : 164mm / 350mm max
Splitting Knife Base : 102mm - 288mm max
Suitable for removing bearings / gears and bushings from shafts.

19pc Front Wheel Drive Bearing Service Kit
For the removal and installation of front hub bearings
without the need to dismantle the steering assembly.
Heavy Duty Steel Drifts : 55.5. to. 91mm

19pc Wheel Hub and Bearing Service Kit
For fitting modern GEN2 Wheel Hub Bearing Units
where the Hub and Bearing are a combined unit.
M18 Pulling Spindle with nuts and thrust bearings.
Heavy Duty Steel Drifts
May be used in conjunction with a Hydraulic Shop Press.

25pc Wheel Bearing Installation Set
Front wheel drive vehicles 60mm to 85mm.
Reduces chances of damage to hub and bearing.
Heavy duty steel drifts.
For use with impact tools.
Also suitable for industrial bearings.

18pc Silent Bearing Tool Set for VAG Rear Axles
For assembly and disassembly of bearings both on and off the vehicle.
For the replacement of silent bearings from the wheel bearing housing
axle guide / trailing arm / wishbone lower / internal as built in
push rod and the upper wishbone not built-in.
For use alongside mechanical spindle.
Applicable to most Audi / VW / Seat vehicles

Bearing Service Tool Kit for Front Wheel Drive Vehicles

VAG Wheel Bearing Tool Set
For mainly Audi / VW vehicles
Clamping nut | Pull spindle |
Bearing cover | Housing | Adaptor ring.
Centring Rings 34 to 80mm
Pressure Rings 65 to 85mm
Retainer adaptors for Clamping nut
Pressure spindle and Mechanical spindle

Mercedes Wheel Bearing Tool Set
A | B | C | E | M | V Class | 190 series | W124
Pulling spindle | Bearing cover | Adaptor ring
Centring Rings - 42 to 80mm Diameter
Pressure Rings - 66 to 93mm Diameter
Pressure spindle with O-ring and mechanical spindle
A Professional way to remove and replace wheel bearings.

Peugeot-Citroen-Renault Wheel Bearing Tool Set
Pulling spindle | Bearing cover | Adaptor ring.
Centring Rings - 35 | 37 | 42 | 45 | 60 | 75mm
Pressure Rings - 65 | 72 | 82 | 83mm
Pressure spindle with O-ring and mechanical spindle
A Professional way to remove and replace wheel bearings.

VAG Wheel Hub Bearing Tool Set - 62mm
For combined wheel hub and bearing units.
Suitable for direct use on vehicle while in-situ.
Mounting shells and Dismantling shells
Mounting and Dismantling plates
Pressure plate with 8 holes

VAG Wheel Hub Bearing Unit Tool - 66mm
For removing and installing the compact wheel bearing
combined wheel hub and bearing unit on VAG vehicles.
High strength ball bearing fitted spindle.
Applicable to VAG vehicles

VAG Compact Wheel Bearing Set
For removing and installing the compact wheel bearing
combined wheel hub and bearing unit on VW vehicles
with high strength spindle and components

Front Wheel Hub Bearing Unit Tool - 78mm
on Ford | Mazda | Volvo
With Pressure plate and bolts
Disassembly shells and pressure piece
Mounting shells and pressure piece
High strength ball bearing spindle.

Wheel Hub Bearing Unit Tool - 82mm
For GEN2 wheel bearings
on Ford and Volvo vehicles

Compact Wheel Bearing Set for Audi / VW
For removing and installing the compact wheel bearing / combined wheel hub and bearing unit on VW Polo Fox etc.
High strength spindle and components suitable for direct use on vehicle while in-situ.

Wheel Hub Bearing Unit Tool Kit
Consists of parts from 4 kits for
62 / 66 / 72 / 85mm VAG applications
CT3872 62mm Kit - Audi A2 | VW Lupo / Front
CT4275 66mm Kit - Skoda Fabia | VW Fox / Front | Polo
CT3582 72mm Kit - Audi A1 / A2 |
Seat Cordoba | Ibiza | Skoda Fabia | Roomster
VW Polo / Front | VW Fox with PAS / Front.
CT3763 85mm Kit - VW Multivan | Touareg | Transporter

90mm Audi Wheel Hub Bearing Unit Tool
For assembling and disassembling front wheel hubs.
For use with workshop hydraulic press.
Suitable for Audi A4 | A6 | A8 | R8.
Pressure Plate and Push Pins.
Disassembly shells.
Disassembly pressure piece.
Mounting sleeve

Wheel Hub and Bearing Repair Kit
Wheel Bearing Hub Removal and Repair for
Rear Wheel Drive Mercedes / Porsche and BMW.
Front Wheel Drive VAG and Asian vehicles.
The Best Kit around for rear wheel hub
and bearing servicing on German vehicles.

Wheel Hub and Bearing Service Kit
Designed to extract and install the drive flange and wheel bearing
on front and rear wheel drive vehicles where a one piece bearing is used.
Applicable to -
Rear wheel drive vehicles : BMW / Mercedes-Benz and Porsche.
Front wheel drive vehicles : Chrysler / Ford / Honda / Hyundai
Infiniti / Kia / Lexus / Mazda / Nissan / Toyota and VAG.
For use on drive axles only.

Wheel Hub and Drive Shaft Puller
4.3kg slide hammer for wheel hubs
and front-wheel drive shafts and brake drums
Suitable for most vehicles.
Bolt Size : M12 x 1.5 / M14 x 1.5

Hydraulic Wheel Hub Puller
Hydraulic Ram with 10 Ton capacity
used to press the axle shaft from the hub.
For 4 or 5 bolt hubs with a 96 - 125mm diameter circle.
Applicable to most vehicles

Universal Hub Puller Kit
with Hydraulic Ram
giving up to 12 Tons of pressure
with a large Slide Hammer assembly.
Suitable for almost all 3 | 4 | 5 and 6 holed hubs.
Ideal for use on a wide range of vehicles

Rear Hub on FWD Ford Transit Puller.
The bearings on these Transits often seize in place
requiring this special tool for removal of the hub.
2000 Front wheel drive models only

Front Wheel Bearing Puller for Ford Transit 2006 onwards
Engineered for the safe in-situ removal of the drive flange
from the bearing / hub unit when replacing brake discs.
Allows the drive flange to be split from the hub assembly and then re-used.
Puller with retaining key
Pressure plates : large / small
Spindle with hexagonal drive
Screw set - 5pc

Universal Wheel Hub Puller
200mm puller screw with striking wrench.
Fits hubs up to 250mm diameter.
For most makes and models of cars or commercial vehicles.
Revolving end of legs ensure that no damage can be done to studs
axle or inner parts of the wheel.

Hydraulic Wheel Hub Puller Set
and Ball Joint Removal Tool
Max : 10 Ton rated
Ram Length : 270mm x 38mm
Tommy bar length : 119mm
High density steel with knurled grip
Thread pitch of ram : 16 gauge x 3/8 BSW
Weight : 2kg

10 Ton Hydraulic Ram
Ball Joint Hub Bearing Puller Tool
Suitable for Cars and Vans.
Ram Length : 270mm
Width : 38mm
Tommy bar length : 119mm
Thread pitch of ram : M12 x 1.75
For use with CT0556 / CT3612 / CT3396

Universal Hub / Brake Drum Puller
Suitable for removing 4-stud vehicle wheel hubs.
Bolt centres : 100 - 115mm
Overall width : 145mm
Depth : 38mm

74mm Hub Nut Socket - 3/4in.Dr
for VW / GM and Mercedes Vans
Suitable for Volkswagen Crafter rear hub nuts
also fits Mercedes 511 twin rear wheel models
and GM Movano and Renault Vans.
S45C Steel

Rear Hub Nut Socket - Ford Transit
1/2in.Dr Heavy duty 4 point specialised impact socket
for removing the rear hub nut on RWD Ford Transit vehicles 2014 -.
Alignment shaft allows accurate location onto castellated nut.

Socket Set - 7pc For Wheel Bearing Lock Nuts
Contains one of each 2-3/8in . 2-1/2in and 55mm Sockets
2-1/2in . 2-3/4in . 2-9/16in and 2-3/8in rounded lock nuts
1/2in Drive

9pc Groove Nut Socket Set - Outside Teeth
with 1/2in.Dr and 3/4in.Dr Sockets
For removing and installing DIN 981 Locknuts
Suitable for following grooved nut sizes :
1/2in.Dr : KM4 | KM5 | KM6 | KM7 | KM8
3/4in.Dr : KM9 | KM10 | KM11 | KM12

9pc Groove Nut Socket Set - Inside Teeth
with 1/2in.Dr and 3/4in.Dr Sockets
For removing and installing DIN 981 Locknuts
Suitable for following grooved nut sizes :
1/2in.Dr : KM4 | KM5 | KM6 | KM7 | KM8
3/4in.Dr : KM9 | KM10 | KM11 | KM12

13pc Special Socket Set
with Internal Teeth for Grooved Nuts
Sizes :18 | 22 | 25 | 28 | 32 | 38 | 45 | 52 | 58 | 65 | 70 | 75 | 80mm
For gently loosening and tightening groove nuts
60mm Long with 1/2in.Dr

IVECO Axle Hub Nut Socket
Size : 105mm / 12 Point - across flats
Use with 36mm spanner | 6 Point drive
Applicable to IVECO Eurotech Cursor trucks.

BPW Axle Extractor - M136 x 2.5
Extremely robust European truck repair tool applicable to :
BPW ECO Plus 8 - 12 ton and BPW ECO 10 ton models.
Used in combination with 43mm and 30mm spanners
Inner size : M136 x 2.5mm
Outer size : 150mm

Extension Tube for MAN TGA Rear Axle
For the removal and installation of wheel hubs.
Protects the wheel bearing and threaded bolts.
With knurling and bore for Tommy Bar.
Thread : M100 x 1.5 | Inner Size : 95mm | Outer Size : 105mm | Length: 360mm
Applicable to MAN TGA Rear Axle / HY-1350

MAN Truck Axle Bearing Extractor
For removing and replacing MAN truck hub bearings.
Turn the screw and remove the old bearing.
Use with 30mm wrench
Applicable to MAN Truck Hub bearings.