Hand Held Vacuum Pump
Test Automotive Systems
Works on all vehicle makes and models
Pump with Vacuum Gauge / Tubing and Vacuum Adaptors
Brake Fluid Reservoir

Brake Bleeder Cap - Tesla Model 3 or Y
Made of Aluminium
for power brake bleeding on Tesla Model 3 and Y vehicles.
Adaptor rotates 360 degrees.
Pressure up to 2.5bar / 36psi.
Compatible with most brake pressure bleeding machines or tank pumps.

Brake Bleeder Cap - Tesla Model S or X
Made of Aluminium
for power brake bleeding on Tesla Model 3 and Y vehicles.
Adaptor rotates 360 degrees.
Pressure up to 2.5bar / 36psi.
Compatible with most brake pressure bleeding machines or tank pumps.

Brake Bleeder Cap - Hyundai
90 degrees angled adaptor for restricted areas.
Suitable for Hyundai / Mitsubishi and Nissan.

Brake Cylinder Adaptor Kit
Adapters for Domestic and Import Vehicles.
Suitable for use with most Pressure Brake Bleeders.
Contains universal adapters for most makes and models.
Adapters fit 90% of current master cylinder reservoirs.

Pneumatic Brake Pressure Bleed Kit
Low pressure tank 10 - 40psi which can be pre-charged
with compressed air - making the unit fully portable.
Suitable for use on ABS systems.
Supplied with a range of vehicle adaptors.

Brake Pressure Test Kit
With Teves Adapter
Swivel Fittings | Straight Fittings
M10-1.0 Bleeder Adapter
2 - 325 Mpa Gauge Assembly

Brake Calliper File - 150mm Blade

Brake Cylinder Hone
20 - 64mm | 3/4 to 2-1/2in. diameter
Flexible shaft for ease of use and self centring.

Cylinder Hone
with 75mm / 3in. Abrasive Stones
Range : 51 - 177mm / 2 to 7in. Bore Diameter
Flexible shaft for ease of use and self centring

2 & 3 Pin Brake Piston Reset Adaptor Set
3/8in.Dr | Range : 20mm - 35mm with adjustable Pins.
For resetting the brake pistons with 2 / 3 or 4 grooves.
Universal - suitable for a variety of vehicle models.
Use a ratchet for easy rewinding of the Calliper piston.
Covers a range of vehicles including Electronic Park Brake models.

3pc Brake Adaptor Set
2 pin and 3 pin adjustable brake Calliper rewind adaptors.
Magnetic 2 Pin 3/8in.Drive adaptor.
2 Pin Adaptor fits most vehicles.
3 Pin Adaptor for Electronic Park Brake / EPB tools.

Disc Brake Piston Rewind Tool
3/8in.Dr Forcing Screw with Left Hand Thread and Reaction Plate
Reversible Keys : 22mm | 32mm
For use on disc brake Callipers fitted to most vehicles

Disc Brake Piston Rewind Tool
Right Hand Thread with Reaction Plate and Reversible Key
3/8in.Dr
For use on disc brake Callipers fitted to most vehicles

2 in 1 Brake Piston Rewind Tool Set
For use on disc brakes fitted to most cars.
Complete with 3/8in. square drive Reversible Adaptors.
With 22mm and 32mm Pins
Enables retraction of piston into the bore allowing new brake pads to be installed.
With Hex handle for use with a socket or spanner for extra torque.
Right handed thread brake Calliper rewind tool.

Disc Brake Piston Rewind Tool
For Citroen / Peugeot and Renault Vehicles
Adaptor 2 - Citroen XM XMT Turbo CT. 2.0 XANTIA1.8 1.9D/DT. 2.0I 2.0 1.65
Adaptor Z - Renault Laguna 2.0 ABS / 2.2 / Saferane2.0 2.2 TD

Disc Brake Piston Rewind Tool
Right and Left Thread in One Tool
3/8in.Dr Force Screw with Reaction Plate
3/8in.Dr Adaptor

Replacement Abrasive Stones
for CT2757 Cylinder Hone

Disc Brake Piston Rewind Set
For Push-back and Wind-back disc brake Pistons
For brake pad replacement and Calliper servicing on collette type brakes

7pc Disc Brake Piston Rewind Tool Kit
Adjustable 2 pin adaptor fits most vehicles.
Adjustable 3 pin adaptor only to be used with
Electronic Park Brake / EPB tools.
Applicable to : Audi | B29 | BMW | Iveco Daily |
Renault | Range Rover | Seat | VW | Volvo

18pc Disc Brake Piston Rewind Set
With Right and Left threaded Spindles
For Pads on both Wind Back and Push Back Type Brakes
Suitable for most makes and models.

Brake Calliper Piston Rewind Tool
For Left and Right Hand Threaded Pistons.
This Spring Design with Reaction Plate
will tackle all types of pistons.
3/8in.Dr - 2 Pin Adapter
2 Pin Adjustable Adapter / size : 20 - 35mm
3 Pin Adjustable Adapter / size : 20 - 35mm

Disc Brake Piston Calliper Rewind Set
Left and Right Hand Thread
24 Adaptors and Calliper Keys
6 and 7mm Hex Keys
3 and 5mm Pin Punches
4 Special Reaction Plates

Disc Brake Calliper Piston Rewind Set
Air Powered Wind Back Tool 80-100psi
Compatible with 3/8in.Dr tools
Right and Left hand Operation
Converter for 2 pin Adaptors
15 Wind Back Keys

Air Disc Brake Piston Rewind Tool
For servicing / replacement of worn brake disc pads
Suitable for push back and wind back brake Pistons
Compatible with 3/8in.Dr adaptors

Disc Brake Piston Compressor
Special wide compressor for 4 Piston Callipers.
Jaw width - 88mm
Applicable to -
BMW and Mercedes Benz with
the 4 Piston Disc Brake models

87mm Disc Brake Pad Spreader
Use with 1/2in.Dr Ratchet or 21mm Spanner.
Suitable for ATE / Bendix / Delco and Girling Callipers.
Standard and 4-Piston Disc Brakes.

Ratchet Type Brake Calliper Press
Evenly spreads force in a parallel manner
to prevent misalignment of Pistons.
Allows work on 2 and 4 Piston fixed Callipers
as well as single and twin Piston floating Callipers.

Disc Brake Pad Spreader
Suitable for ATE / Bendix / Delco and Girling Callipers.
Standard and 4-Piston Disc Brakes.

Disc Brake Pad Puller
For the quick removal of disc brake pads.
Especially useful where brakes have seized.
Mini slide hammer to ease pad from Calliper

Disc Brake Pad Spreader with Twin Bolts
Used to compress Pistons back into Callipers
when installing new brake pads on any single or dual sliding type Calliper
Swivelling nose pieces reduce the chance of Piston cocking
Fine threaded screws for added pressure

Hydraulic Brake Hose Clamp
One-handed snap action Clamp for Brake hydraulic hoses.
Dimensions : 210 x 40 x 10mm

2pc Brake Line Jig Set
Clamp both new and old lines parallel
to each other to make exact copies.
A brake line can consist of many angles /
bends that should be correct for the new line to fit.
For steel / cooper and plastic coated brake lines
with 3/16in. or 1/4in.| 4.75mm to 6.3mm diameters.

Brake Pipe Bender
for 3. 4. 6mm diameter Tubing

Brake Pipe Bending Tool
for bending 5mm diameter brake lines.
With 2 bending options - Tight and Open radius bends.
Central 6mm Hex slot

Brake Pipe Bending Pliers
Special shaped jaws.
Bend 3/16in. and 1/4in. brake and fuel lines.
Forged steel.
Cushioned grips.
Bends without distortion.

Universal Bending Tool
Forms wire and flat metal
into Clamps / handles / brackets / hooks and coils.
Easily attaches to work bench or vice to make angle bends up to
5/16in. / 8mm diameter Rod and
1-3/16 x 1/12in. / 30 x 2mm Flat Metal.

Brake Spring Pliers
220mm long
For the removal of drum brake return springs.
One end grips on the brake lining the other hooks onto the spring.
Suitable for most vehicle drum brakes.

153mm T-Handle Assembly Hook
For Brake Springs and also Headlight units

4pc HGV Brake Calliper Socket Set
Hex 8mm | 10mm | S8 and 11PT
12mm Hex Drive
for Commercial SAF / NFZ / Knorr brake Calliper systems

Brake Calliper Socket
11pt Spline | 3/8"Dr | 26mm Deep
For Knorr-Bremse Brake Callipers on Volvo trucks also
DAF / Foden / MAN / Mercedes / Scania / BOVA
plus BPW & SAF Trailers.

17pc Brake Calliper Socket and Bit Set
Impact Hex Bits : 7 | 8 | 9 | 11mm
Special Brake Calliper Sockets : 11.5 | 14 | 15 | 20 | 22mm
Pentagon Sockets : 10 | 12.5 | 14 | 19mm
Pentagon Bit :10mm
For use on brake Callipers when replacing the brake pads.
Applicable to : Alfa Romeo / Audi / BMW / Ford / Mercedes / Porsche.

3pc 1/2in.Dr Socket and Bit Set Brake Servicing Kit
Pentagon Profile

12pc Brake Calliper Guide Bolt Thread Repair Set
Used for repairing faulty inner threads on
brake Calliper guide bolts in wheel bearing
housing brake Calliper carriers with NO
need to remove the wheel bearings or struts.
For use on most Ford -
Vauxhall / Opel - Vauxhall | Opel and
VAG - Audi | Seat | Skoda | VW vehicles.

15pc Brake Calliper Thread Repair Set
For rethreading brake Calliper bolt holes.
With Step drill to increase hole sizes.
M12 x 1.5mm tap step drill insert locator.
Washers with centre roller bearing.
10 replacement inserts.

16pc Brake Calliper Guide Thread Repair Kit
with Titanium coated core drill
Tap and 10 threaded inserts.
Applicable to
Volkswagen - Golf MKIV / Beetle
Seat - Exeo Estate ST 170
Ford - Focus | C-Max
Vauxhall - Astra-G

5pc Elbow Connector Socket Set
Sizes : 12 | 14 | 17 | 19 | 22mm
3/8in.Dr / Single Hex and 50mm Deep
Chrome Vanadium
Suitable for L-type pipe fittings on trucks.
Suitable for construction equipment and general machinery.

Manual Tube Expander
7-in-1 Pipe Expander for copper and aluminium tubing.
Sizes : 6 | 8 | 10 | 12 | 16 | 19 | 22mm
1/4 | 5/16 | 3/8 | 1/2 | 5/8 | 3/4 | 7/8in.
Made of heavy duty alloy steel for a long working life.

Universal Flaring Too Kit
Adjustable | 5 - 16mm
For creating conical / tapered flares.
For Brass or Aluminium pipes.
Size range : 5 - 16mm | 3/16 - 5/8in.

6pc Pipe Flaring Kit
Steel Compressor Yoke : 3/16 | 1/4 | 5/16 | 3/8 | 1/2 | 5/8in.
Flaring Tool
Flexible Tube Benders
Tube Cutter 3 - 28mm